[Sat Jun 22 00:45:56 2013] Detection parameters:
  Position = (461.6, 431.8) = 14 41 17.20 -62 29 32.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 199.8 +/- 20.3
  Background counts = 30.2
  Rate = 0.01 +/- 0.001

[Sat Jun 22 00:46:06 2013] Off-axis axis estimate = 15.28'
[Sat Jun 22 00:48:03 2013] Using EEF radius (= 14.07 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 00:48:03 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun 22 00:48:03 2013] Initial guess for spatial extent in simple fitting = 14.07"
[Sat Jun 22 00:48:03 2013] source mask rpix=3.2, npix_max = 55, mask sum = 55, frac = 0.986
[Sat Jun 22 00:48:03 2013] Giving source the simple spatial ID 50 for pass 0, mean size = 14.07"
[Sat Jun 22 00:48:06 2013] fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_src50.ximg exists
[Sat Jun 22 00:48:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_src50.csv
[Sat Jun 22 00:48:06 2013] fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_src50_1.ximg exists
[Sat Jun 22 00:48:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_src50.csv
[Sat Jun 22 00:48:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_src50_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:48:11 2013] fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src50.ximg exists
[Sat Jun 22 00:48:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src50.csv
[Sat Jun 22 00:48:11 2013] fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src50_1.ximg exists
[Sat Jun 22 00:48:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src50.csv
[Sat Jun 22 00:48:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src50_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:49:54 2013] Warning, spatial fit 50 centroid is now closest to src. 21
[Sat Jun 22 00:49:54 2013] Spatial fit model total counts = 1326.640000, observed total counts = 1245.000000
[Sat Jun 22 00:49:54 2013] Offset between fit and detection position for source 29 = 0.800771 pixels
[Sat Jun 22 00:49:54 2013] Warning, changing simple spatial fit ID from 50 to 69
[Sat Jun 22 00:49:54 2013] 1285.389000 total counts/ 865.742000 bgd. counts: snr = 14.262310
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 0.800771 pixels
  Position = (461.8, 431.0) = 14 41 17.08 -62 29 34.8
  Extent = 27.9 (27.9-55.8)", rotation angle = 0
  Source counts = 419.6 +/- 35.9
  Background counts = 865.7
  Rate = 0.02 +/- 0.002
[Sat Jun 22 00:49:54 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 00:49:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 00:49:54 2013] Assessing source extent using major axis lower bound
[Sat Jun 22 00:49:54 2013] Source does appear to be extended
[Sat Jun 22 00:49:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 00:49:54 2013] Source is confused with source 33
[Sat Jun 22 00:49:54 2013] Source is confused with source 22
[Sat Jun 22 00:49:54 2013] Source is confused with source 21
[Sat Jun 22 00:49:54 2013] Source is confused with source 40
[Sat Jun 22 00:49:54 2013] Source is confused with source 30
[Sat Jun 22 00:49:54 2013] Source is confused with source 42
[Sat Jun 22 00:49:54 2013] Source is confused with source 41
[Sat Jun 22 00:50:55 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 22 00:50:55 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun 22 00:50:55 2013] Initial guess for spatial extent in simple fitting = 27.89"
[Sat Jun 22 00:50:55 2013] source mask rpix=6.4, npix_max = 191, mask sum = 168, frac = 0.879
[Sat Jun 22 00:50:55 2013] Giving source the simple spatial ID 48 for pass 1, mean size = 27.89"
[Sat Jun 22 00:50:57 2013] fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_src48.ximg exists
[Sat Jun 22 00:50:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_src48.csv
[Sat Jun 22 00:50:58 2013] fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_src48_1.ximg exists
[Sat Jun 22 00:50:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_src48.csv
[Sat Jun 22 00:50:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_src48_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:51:02 2013] fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src48.ximg exists
[Sat Jun 22 00:51:02 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src48.csv
[Sat Jun 22 00:51:02 2013] fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src48_1.ximg exists
[Sat Jun 22 00:51:02 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src48.csv
[Sat Jun 22 00:51:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src48_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:52:31 2013] Warning, spatial fit 48 centroid is now closest to src. 41
[Sat Jun 22 00:52:31 2013] Spatial fit model total counts = 1306.440000, observed total counts = 1245.000000
[Sat Jun 22 00:52:31 2013] Offset between fit and detection position for source 29 = 0.972634 pixels
[Sat Jun 22 00:52:31 2013] Warning, changing simple spatial fit ID from 48 to 65
[Sat Jun 22 00:52:31 2013] 942.011000 total counts/ 599.992000 bgd. counts: snr = 13.962960
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 0.972634 pixels
  Position = (462.6, 431.6) = 14 41 16.60 -62 29 32.1
  Extent = 27.9 (27.9-55.8)", rotation angle = 0
  Source counts = 342.0 +/- 30.7
  Background counts = 600.0
  Rate = 0.02 +/- 0.002
[Sat Jun 22 00:52:31 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 00:52:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 00:52:31 2013] Assessing source extent using major axis lower bound
[Sat Jun 22 00:52:31 2013] Source does appear to be extended
[Sat Jun 22 00:52:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 04:08:57 2013] XMMSAS src. selection expression = ellipse(40198.006000, 37503.690000, 1673.478048, 1673.478048, 0.000000, X, Y)
[Sat Jun 22 04:08:57 2013] Not overwriting source region fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src29_src.reg
[Sat Jun 22 04:08:57 2013] Extracting stamp from image fullrun_mos2_xmm0110010701_pi300-10000_cl_sm2.00.img.gz, (366, 335) - (559, 528)
[Sat Jun 22 04:08:57 2013] XMMSAS bgd. selection expression = annulus(40198.006000, 37503.690000, 2789.130080, 5578.260161, X, Y) && !ellipse(38985.468000, 37350.932000, 2180.392063, 2180.392063, 0.000000, X, Y) && !ellipse(41969.706909, 34492.645264, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40515.711975, 36323.295929, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40579.886688, 37085.990265, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39490.613129, 37797.978851, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37825.766388, 38062.624207, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41116.842468, 36472.168732, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39996.937836, 35981.649414, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42263.400940, 33918.083649, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40516.641235, 35447.733643, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41537.048645, 35686.755310, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37248.890000, 38374.628000, 2162.704062, 2162.704062, 0.000000, X, Y)
[Sat Jun 22 04:08:57 2013] Writing fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src29.gif
[Sat Jun 22 04:09:07 2013] ../../xmm0110010701/products/events/fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src29_src.evt and ../../xmm0110010701/products/events/fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src29_bgd.evt exist, delete to re-create
[Sat Jun 22 04:09:07 2013] Mean detx,y = (-15692.36, 4201.32) 
[Sat Jun 22 04:09:07 2013] ../../xmm0110010701/products/images/fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src29_src.img and ../../xmm0110010701/products/images/fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src29_bgd.img exist, delete to re-create
[Sat Jun 22 04:09:07 2013] ../../xmm0110010701/products/spectra/fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src29_src_b10.pi.gz and ../../xmm0110010701/products/spectra/fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src29_bgd.pi exist, delete to re-create
[Sat Jun 22 04:09:07 2013] Setting source spectrum file to fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Sat Jun 22 04:09:07 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Sat Jun 22 04:09:07 2013] ../../xmm0110010701/products/lightcurves/fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src29_src.lc and ../../xmm0110010701/products/lightcurves/fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src29_bgd.lc exist, delete to re-create
[Sat Jun 22 04:09:33 2013] fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src29.rmf exists, delete to re-create
[Sat Jun 22 04:09:33 2013] fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src29.arf exists, delete to re-create
[Sat Jun 22 04:11:28 2013] Updating aperture counts using extracted products
[Sat Jun 22 04:11:28 2013] Total counts from fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src29_src_b10.pi.gz = 2421.00
[Sat Jun 22 04:11:29 2013] Total counts from fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src29_bgd.pi.gz = 2112.00
[Sat Jun 22 04:11:29 2013] Got source and background scale factors 5164792.000000, 20047014.000000
[Sat Jun 22 04:11:29 2013] User source parameters:
  Position = (462.6, 431.6) = 14 41 16.60 -62 29 32.1
  Extent = 27.9 (27.9-55.8)", rotation angle = 0
  Source aperture counts = 1876.9 +/- 50.2
  Background aperture counts = 544.1
  Rate = 0.1 +/- 0.003

[Sat Jun 22 04:11:42 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 22 04:11:42 2013] Using photon index=1.80, rate=0.0197, arf fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src29.arf
[Sat Jun 22 04:11:42 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 22 04:11:42 2013] Updating source flux to 8.5e-13
[Sat Jun 22 04:13:00 2013] Flag c found in src. 29 procflags, skipping spectral fitting
[Sat Jun 22 04:14:22 2013] xmm0110010701/analysis//spectral/fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src29_pl.csv not found, spectral fit skipped or did not complete