[Sat Jun 22 00:45:55 2013] Detection parameters:
  Position = (480.0, 270.9) = 14 41 4.90 -62 41 10.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 193.6 +/- 23.1
  Background counts = 78.5
  Rate = 0.01 +/- 0.001

[Sat Jun 22 00:46:06 2013] Off-axis axis estimate = 13.32'
[Sat Jun 22 00:48:03 2013] Using EEF radius (= 13.09 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 00:48:03 2013] Initial guess for spatial extent in simple fitting = 13.09"
[Sat Jun 22 00:48:03 2013] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.995
[Sat Jun 22 00:48:03 2013] Giving source the simple spatial ID 53 for pass 0, mean size = 13.09"
[Sat Jun 22 00:48:06 2013] fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_src53.ximg exists
[Sat Jun 22 00:48:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_src53.csv
[Sat Jun 22 00:48:06 2013] fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_src53_1.ximg exists
[Sat Jun 22 00:48:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_src53.csv
[Sat Jun 22 00:48:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:48:11 2013] fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src53.ximg exists
[Sat Jun 22 00:48:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src53.csv
[Sat Jun 22 00:48:11 2013] fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src53_1.ximg exists
[Sat Jun 22 00:48:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src53.csv
[Sat Jun 22 00:48:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:49:54 2013] Source 25 is offset by -2.483662 and 6.340901 pixels which is larger than
2 X fitted extent = 4.084819 x 4.084819, not incorporating fit results
[Sat Jun 22 00:49:54 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 00:49:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 00:49:54 2013] Assessing source extent using major
[Sat Jun 22 00:49:54 2013] Source does appear to be extended
[Sat Jun 22 00:49:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 00:49:54 2013] Source is confused with source 54
[Sat Jun 22 00:50:55 2013] Using EEF radius (= 13.09 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 00:50:55 2013] Initial guess for spatial extent in simple fitting = 13.09"
[Sat Jun 22 00:50:55 2013] source mask rpix=3.0, npix_max = 49, mask sum = 49, frac = 0.995
[Sat Jun 22 00:50:55 2013] Giving source the simple spatial ID 51 for pass 1, mean size = 13.09"
[Sat Jun 22 00:50:58 2013] fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_src51.ximg exists
[Sat Jun 22 00:50:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_src51.csv
[Sat Jun 22 00:50:58 2013] fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_src51_1.ximg exists
[Sat Jun 22 00:50:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_src51.csv
[Sat Jun 22 00:50:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_src51_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:51:02 2013] fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src51.ximg exists
[Sat Jun 22 00:51:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src51.csv
[Sat Jun 22 00:51:02 2013] fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src51_1.ximg exists
[Sat Jun 22 00:51:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src51.csv
[Sat Jun 22 00:51:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src51_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:52:31 2013] Warning: source 51 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 25 at 16.944989 pixels away
[Sat Jun 22 00:52:31 2013] Source 25 is offset by -0.705777 and 8.776009 pixels which is larger than
2 X fitted extent = 1.468740 x 1.468740, not incorporating fit results
[Sat Jun 22 00:52:31 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 00:52:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 00:52:31 2013] Assessing source extent using major
[Sat Jun 22 00:52:31 2013] Source does appear to be extended
[Sat Jun 22 00:52:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 04:08:57 2013] XMMSAS src. selection expression = ellipse(41715.283417, 23523.240387, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 22 04:08:57 2013] Not overwriting source region fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src25_src.reg
[Sat Jun 22 04:08:57 2013] Extracting stamp from image fullrun_mos2_xmm0110010701_pi300-10000_cl_sm2.00.img.gz, (443, 233) - (518, 308)
[Sat Jun 22 04:08:57 2013] XMMSAS bgd. selection expression = annulus(41715.283417, 23523.240387, 1087.500000, 2175.000000, X, Y) && !ellipse(41418.506000, 21434.936000, 2075.832060, 2075.832060, 0.000000, X, Y) && !ellipse(40243.926000, 20615.784000, 1602.792046, 906.984026, 306.646000, X, Y) && !ellipse(38713.881162, 20504.077194, 1602.792046, 1514.811507, 103.061876, X, Y) && !ellipse(40865.516000, 20967.320000, 2509.776072, 2509.776072, 0.000000, X, Y) && !ellipse(37937.068000, 22452.038000, 1652.312048, 1652.312048, 0.000000, X, Y) && !ellipse(37246.828000, 22051.418000, 3812.752110, 3812.752110, 0.000000, X, Y) && !ellipse(38174.666000, 22752.646000, 3912.016113, 3912.016113, 0.000000, X, Y) && !ellipse(39246.200000, 23648.318000, 1956.008056, 1956.008056, 0.000000, X, Y) && !ellipse(39720.477600, 24197.023102, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40781.591919, 22571.829224, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41228.919220, 23694.059662, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 22 04:08:57 2013] Writing fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src25.gif
[Sat Jun 22 04:09:07 2013] ../../xmm0110010701/products/events/fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src25_src.evt and ../../xmm0110010701/products/events/fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src25_bgd.evt exist, delete to re-create
[Sat Jun 22 04:09:07 2013] Mean detx,y = (-12744.97, -9252.58) 
[Sat Jun 22 04:09:07 2013] ../../xmm0110010701/products/images/fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src25_src.img and ../../xmm0110010701/products/images/fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src25_bgd.img exist, delete to re-create
[Sat Jun 22 04:09:07 2013] ../../xmm0110010701/products/spectra/fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src25_src_b10.pi.gz and ../../xmm0110010701/products/spectra/fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src25_bgd.pi exist, delete to re-create
[Sat Jun 22 04:09:07 2013] Setting source spectrum file to fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Sat Jun 22 04:09:07 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Sat Jun 22 04:09:07 2013] ../../xmm0110010701/products/lightcurves/fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src25_src.lc and ../../xmm0110010701/products/lightcurves/fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src25_bgd.lc exist, delete to re-create
[Sat Jun 22 04:09:33 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 22 04:09:33 2013] rmf not generated due to insufficient counts
[Sat Jun 22 04:09:33 2013] fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src25.arf exists, delete to re-create
[Sat Jun 22 04:11:29 2013] Updating aperture counts using extracted products
[Sat Jun 22 04:11:29 2013] Total counts from fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src25_src_b10.pi.gz = 1002.00
[Sat Jun 22 04:11:30 2013] Total counts from fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src25_bgd.pi.gz = 127.00
[Sat Jun 22 04:11:30 2013] Got source and background scale factors 1127396.000000, 250876.000000
[Sat Jun 22 04:11:30 2013] User source parameters:
  Position = (480.0, 270.9) = 14 41 4.90 -62 41 10.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 431.3 +/- 32.7
  Background aperture counts = 570.7
  Rate = 0.02 +/- 0.002

[Sat Jun 22 04:11:30 2013] Updating counts from extracted products
[Sat Jun 22 04:11:30 2013] Set source signif. to 431.28/23.89 = 18.05
[Sat Jun 22 04:11:43 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 22 04:11:43 2013] Using photon index=1.80, rate=0.0248, arf fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src25.arf
[Sat Jun 22 04:11:43 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 22 04:11:43 2013] Updating source flux to 9.2e-13
[Sat Jun 22 04:13:00 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 22 04:14:22 2013] xmm0110010701/analysis//spectral/fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src25_pl.csv not found, spectral fit skipped or did not complete