[Sat Jun 22 00:45:55 2013] Detection parameters:
  Position = (392.5, 205.8) = 14 42 0.06 -62 45 56.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 461.7 +/- 30.7
  Background counts = 56.8
  Rate = 0.05 +/- 0.003

[Sat Jun 22 00:46:06 2013] Off-axis axis estimate = 9.57'
[Sat Jun 22 00:48:03 2013] Using EEF radius (= 11.21 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 00:48:03 2013] Initial guess for spatial extent in simple fitting = 11.21"
[Sat Jun 22 00:48:03 2013] source mask rpix=2.6, npix_max = 37, mask sum = 42, frac = 1.108
[Sat Jun 22 00:48:03 2013] Giving source the simple spatial ID 8 for pass 0, mean size = 11.21"
[Sat Jun 22 00:48:05 2013] fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_src8.ximg exists
[Sat Jun 22 00:48:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_src8.csv
[Sat Jun 22 00:48:05 2013] fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_src8_1.ximg exists
[Sat Jun 22 00:48:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_src8.csv
[Sat Jun 22 00:48:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:48:10 2013] fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Sat Jun 22 00:48:10 2013] fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Sat Jun 22 00:48:10 2013] Fit fullrun_mos2_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly
[Sat Jun 22 00:49:53 2013] Source 18 is offset by -3.516378 and -0.643630 pixels which is larger than
2 X fitted extent = 1.339554 x 1.339554, not incorporating fit results
[Sat Jun 22 00:49:53 2013] Warning, spatial fit 8 centroid is now closest to src. 83
[Sat Jun 22 00:49:54 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 00:49:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 00:49:54 2013] Assessing source extent using major
[Sat Jun 22 00:49:54 2013] Source does appear to be extended
[Sat Jun 22 00:49:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 00:49:54 2013] Source is confused with source 7
[Sat Jun 22 00:50:55 2013] Using EEF radius (= 11.21 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 00:50:55 2013] Initial guess for spatial extent in simple fitting = 11.21"
[Sat Jun 22 00:50:55 2013] source mask rpix=2.6, npix_max = 37, mask sum = 42, frac = 1.108
[Sat Jun 22 00:50:55 2013] Giving source the simple spatial ID 8 for pass 1, mean size = 11.21"
[Sat Jun 22 00:50:56 2013] fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_src8.ximg exists
[Sat Jun 22 00:50:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_src8.csv
[Sat Jun 22 00:50:56 2013] fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_src8_1.ximg exists
[Sat Jun 22 00:50:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_src8.csv
[Sat Jun 22 00:50:56 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:51:01 2013] fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Sat Jun 22 00:51:01 2013] fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Sat Jun 22 00:51:01 2013] Fit fullrun_mos2_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Sat Jun 22 00:52:30 2013] Spatial fit model total counts = 2484.000000, observed total counts = 2486.000000
[Sat Jun 22 00:52:30 2013] Offset between fit and detection position for source 18 = 6.407159 pixels
[Sat Jun 22 00:52:30 2013] 2601.540000 total counts/ 605.280000 bgd. counts: snr = 81.140736
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 6.407159 pixels
  Position = (386.3, 204.3) = 14 42 4.00 -62 46 2.6
  Extent = 22.4 (22.3-44.9)", rotation angle = 0
  Source counts = 1996.3 +/- 51.0
  Background counts = 605.3
  Rate = 0.1 +/- 0.003
[Sat Jun 22 00:52:31 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 00:52:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 00:52:31 2013] Assessing source extent using major axis lower bound
[Sat Jun 22 00:52:31 2013] Source does appear to be extended
[Sat Jun 22 00:52:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 04:08:50 2013] Counts = 1996.260000, rescaling region sizes by 2.000000
[Sat Jun 22 04:08:50 2013] XMMSAS src. selection expression = ellipse(33559.304000, 17728.256000, 2691.288077, 2691.288077, 0.000000, X, Y)
[Sat Jun 22 04:08:50 2013] Not overwriting source region fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src18_src.reg
[Sat Jun 22 04:08:50 2013] Extracting stamp from image fullrun_mos2_xmm0110010701_pi300-10000_cl_sm2.00.img.gz, (232, 50) - (541, 359)
[Sat Jun 22 04:08:50 2013] XMMSAS bgd. selection expression = annulus(33559.304000, 17728.256000, 8970.960258, 17941.920516, X, Y) && !ellipse(41418.506000, 21434.936000, 2075.832060, 2075.832060, 0.000000, X, Y) && !ellipse(31076.646000, 19551.482000, 1536.832044, 1536.832044, 0.000000, X, Y) && !ellipse(40243.926000, 20615.784000, 1602.792046, 906.984026, 306.646000, X, Y) && !ellipse(33200.426000, 17527.448000, 2533.024073, 2533.024073, 0.000000, X, Y) && !ellipse(32849.173568, 17746.308111, 1602.792046, 930.228580, 168.755150, X, Y) && !ellipse(33134.261200, 22215.270000, 1971.752057, 1971.752057, 0.000000, X, Y) && !ellipse(38713.881162, 20504.077194, 1602.792046, 1514.811507, 103.061876, X, Y) && !ellipse(33958.365753, 22833.044281, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40865.516000, 20967.320000, 2509.776072, 2509.776072, 0.000000, X, Y) && !ellipse(35608.909851, 21783.480667, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32868.752135, 22030.452307, 1579.456045, 1579.456045, 334.533500, X, Y) && !ellipse(33396.909363, 22406.813843, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31785.832275, 18131.855591, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35589.644344, 21052.202940, 854.720025, 853.640971, -0.000000, X, Y) && !ellipse(18002.857400, 24848.454600, 489.075214, 362.005610, 90.000000, X, Y) && !ellipse(30660.139679, 19947.907578, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34682.896000, 22813.606400, 1602.792046, 1602.792046, 0.000000, X, Y) && !ellipse(30157.476000, 20484.472000, 1536.832044, 1536.832044, 0.000000, X, Y) && !ellipse(36752.964000, 19522.114000, 2381.184069, 1798.184052, 5.364380, X, Y) && !ellipse(37937.068000, 22452.038000, 1652.312048, 1652.312048, 0.000000, X, Y) && !ellipse(36143.329200, 21556.132000, 1635.744047, 936.304027, 124.163000, X, Y) && !ellipse(34490.634000, 21774.560000, 1634.680047, 1634.680047, 0.000000, X, Y) && !ellipse(34722.136000, 23251.774000, 1695.840049, 1695.840049, 0.000000, X, Y) && !ellipse(29317.055939, 20979.987823, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35323.194183, 29434.992340, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35084.364000, 20873.742200, 1714.848049, 1714.848049, 0.000000, X, Y) && !ellipse(33382.120850, 23653.400543, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35504.066200, 23535.392200, 1688.672049, 1688.672049, 0.000000, X, Y) && !ellipse(35754.380000, 20851.366000, 3269.360094, 3269.360094, 0.000000, X, Y) && !ellipse(37246.828000, 22051.418000, 3812.752110, 3812.752110, 0.000000, X, Y) && !ellipse(28835.492035, 20883.948776, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34967.632000, 19020.766000, 1789.184051, 1789.184051, 0.000000, X, Y) && !ellipse(31729.861603, 21815.321106, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38174.666000, 22752.646000, 3912.016113, 3912.016113, 0.000000, X, Y) && !ellipse(30513.292400, 21623.242000, 1089.056031, 1089.056031, 0.000000, X, Y) && !ellipse(35351.183502, 22576.504730, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33136.620000, 21204.689000, 1383.776040, 1383.776040, 0.000000, X, Y) && !ellipse(34722.448669, 18733.815781, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34589.954742, 24025.587860, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33833.166200, 20215.364200, 730.910421, 730.910421, 0.000000, X, Y) && !ellipse(30918.699707, 20958.815292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32429.469788, 23505.945526, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32548.529266, 20799.335648, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40198.006000, 37503.690000, 2231.304064, 2231.304064, 0.000000, X, Y) && !ellipse(39246.200000, 23648.318000, 1956.008056, 1956.008056, 0.000000, X, Y) && !ellipse(39250.146000, 18942.770000, 1456.480042, 1456.480042, 0.000000, X, Y) && !ellipse(41715.283417, 23523.240387, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31531.812347, 21203.967422, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32005.129730, 21280.843796, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38985.468000, 37350.932000, 2180.392063, 2180.392063, 0.000000, X, Y) && !ellipse(26335.381000, 19513.154000, 1448.680042, 1448.680042, 0.000000, X, Y) && !ellipse(41969.706909, 34492.645264, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40515.711975, 36323.295929, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32004.322601, 23342.430237, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29539.242065, 21389.155716, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29386.848694, 19079.403687, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33637.466000, 20060.424600, 1605.808046, 1605.808046, 0.000000, X, Y) && !ellipse(39720.477600, 24197.023102, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25025.456000, 20890.844000, 1708.760049, 1708.760049, 353.990000, X, Y) && !ellipse(29431.080000, 20436.084000, 872.192025, 872.192025, 0.000000, X, Y) && !ellipse(40781.591919, 22571.829224, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33152.436800, 20110.258000, 802.904023, 802.904023, 0.000000, X, Y) && !ellipse(36533.372467, 23297.485901, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23134.888000, 21692.135200, 1365.264039, 1365.264039, 0.000000, X, Y) && !ellipse(24016.252000, 20991.632000, 2770.096080, 2770.096080, 0.000000, X, Y) && !ellipse(41228.919220, 23694.059662, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22305.669200, 27237.261400, 1279.080037, 1279.080037, 0.000000, X, Y) && !ellipse(41116.842468, 36472.168732, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24457.399170, 20494.944504, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28564.498000, 19178.744800, 1499.872043, 1499.872043, 0.000000, X, Y) && !ellipse(29924.424000, 23049.397600, 1413.344041, 1413.344041, 0.000000, X, Y) && !ellipse(25190.384000, 25920.328000, 1088.128031, 1088.128031, 0.000000, X, Y) && !ellipse(28242.922000, 19110.665600, 1517.944044, 1517.944044, 0.000000, X, Y) && !ellipse(21647.505997, 26855.103027, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39996.937836, 35981.649414, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42263.400940, 33918.083649, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25953.405160, 25875.003200, 1033.256030, 1033.256030, 0.000000, X, Y) && !ellipse(40516.641235, 35447.733643, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27940.569275, 27258.181610, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25449.085600, 23861.966300, 1174.736034, 1174.736034, 0.000000, X, Y) && !ellipse(41537.048645, 35686.755310, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18888.459290, 36156.814972, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23336.832000, 21342.594000, 1385.048040, 1385.048040, 0.000000, X, Y) && !ellipse(28035.979600, 27529.971600, 1134.384033, 1134.384033, 0.000000, X, Y)
[Sat Jun 22 04:08:50 2013] Writing fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src18.gif
[Sat Jun 22 04:09:05 2013] ../../xmm0110010701/products/events/fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src18_src.evt and ../../xmm0110010701/products/events/fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src18_bgd.evt exist, delete to re-create
[Sat Jun 22 04:09:05 2013] Mean detx,y = (-3172.91, -11147.29) 
[Sat Jun 22 04:09:05 2013] ../../xmm0110010701/products/images/fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src18_src.img and ../../xmm0110010701/products/images/fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src18_bgd.img exist, delete to re-create
[Sat Jun 22 04:09:05 2013] ../../xmm0110010701/products/spectra/fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src18_src_b10.pi.gz and ../../xmm0110010701/products/spectra/fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src18_bgd.pi exist, delete to re-create
[Sat Jun 22 04:09:05 2013] Setting source spectrum file to fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Sat Jun 22 04:09:05 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Sat Jun 22 04:09:05 2013] ../../xmm0110010701/products/lightcurves/fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src18_src.lc and ../../xmm0110010701/products/lightcurves/fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src18_bgd.lc exist, delete to re-create
[Sat Jun 22 04:09:33 2013] fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src18.rmf exists, delete to re-create
[Sat Jun 22 04:09:33 2013] fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src18.arf exists, delete to re-create
[Sat Jun 22 04:11:18 2013] Updating aperture counts using extracted products
[Sat Jun 22 04:11:18 2013] Total counts from fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src18_src_b10.pi.gz = 15387.00
[Sat Jun 22 04:11:18 2013] Total counts from fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src18_bgd.pi.gz = 41064.00
[Sat Jun 22 04:11:18 2013] Got source and background scale factors 22743840.000000, 273479023.000000
[Sat Jun 22 04:11:18 2013] User source parameters:
  Position = (386.3, 204.3) = 14 42 4.00 -62 46 2.6
  Extent = 22.4 (22.3-44.9)", rotation angle = 0
  Source aperture counts = 11971.9 +/- 125.0
  Background aperture counts = 3415.1
  Rate = 0.7 +/- 0.007

[Sat Jun 22 04:11:41 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 22 04:11:41 2013] Using photon index=1.80, rate=0.115, arf fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src18.arf
[Sat Jun 22 04:11:41 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 22 04:11:41 2013] Updating source flux to 2.5e-12
[Sat Jun 22 04:13:00 2013] Flag b found in src. 18 procflags, skipping spectral fitting
[Sat Jun 22 04:13:00 2013] Flag c found in src. 18 procflags, skipping spectral fitting
[Sat Jun 22 04:14:22 2013] xmm0110010701/analysis//spectral/fullrun_mos2_xmm0110010701_pi300-10000_pass1_cl_src18_pl.csv not found, spectral fit skipped or did not complete