[Sat Jun 22 00:45:49 2013] Detection parameters:
  Position = (294.2, 230.5) = 14 43 2.37 -62 44 1.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 68.4 +/- 12.9
  Background counts = 50.2
  Rate = 0.007 +/- 0.001

[Sat Jun 22 00:45:52 2013] Off-axis axis estimate = 4.94'
[Sat Jun 22 00:47:53 2013] Using EEF radius (= 8.90 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 00:47:53 2013] Initial guess for spatial extent in simple fitting = 8.90"
[Sat Jun 22 00:47:53 2013] source mask rpix=2.0, npix_max = 25, mask sum = 23, frac = 0.887
[Sat Jun 22 00:47:53 2013] Giving source the simple spatial ID 70 for pass 0, mean size = 8.90"
[Sat Jun 22 00:47:56 2013] fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_src70.ximg exists
[Sat Jun 22 00:47:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_src70.csv
[Sat Jun 22 00:47:56 2013] fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_src70_1.ximg exists
[Sat Jun 22 00:47:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_src70.csv
[Sat Jun 22 00:47:56 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_src70_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_src70.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:48:01 2013] fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src70.ximg exists
[Sat Jun 22 00:48:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src70.csv
[Sat Jun 22 00:48:01 2013] fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src70_1.ximg exists
[Sat Jun 22 00:48:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src70.csv
[Sat Jun 22 00:48:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src70_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src70.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:49:20 2013] Warning, spatial fit 70 centroid is now closest to src. 80
[Sat Jun 22 00:49:21 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 00:49:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 00:49:21 2013] Assessing source extent using major
[Sat Jun 22 00:49:21 2013] Source does appear to be extended
[Sat Jun 22 00:49:21 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 00:49:21 2013] Deleting source due to low Poisson probability 1.0