[Sat Jun 22 00:45:48 2013] Detection parameters:
  Position = (269.8, 244.0) = 14 43 17.82 -62 43 9.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 88.1 +/- 14.6
  Background counts = 32.7
  Rate = 0.008 +/- 0.001

[Sat Jun 22 00:45:52 2013] Off-axis axis estimate = 4.46'
[Sat Jun 22 00:47:53 2013] Using EEF radius (= 8.66 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 00:47:53 2013] Initial guess for spatial extent in simple fitting = 8.66"
[Sat Jun 22 00:47:53 2013] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.008
[Sat Jun 22 00:47:53 2013] Giving source the simple spatial ID 63 for pass 0, mean size = 8.66"
[Sat Jun 22 00:47:56 2013] fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_src63.ximg exists
[Sat Jun 22 00:47:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_src63.csv
[Sat Jun 22 00:47:56 2013] fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_src63_1.ximg exists
[Sat Jun 22 00:47:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_src63.csv
[Sat Jun 22 00:47:56 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_src63_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:48:01 2013] fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src63.ximg exists
[Sat Jun 22 00:48:01 2013] fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src63_1.ximg exists
[Sat Jun 22 00:48:01 2013] Fit fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src63 appears to have run properly
[Sat Jun 22 00:49:20 2013] Spatial fit model total counts = 642.021000, observed total counts = 641.000000
[Sat Jun 22 00:49:20 2013] Offset between fit and detection position for source 84 = 2.177602 pixels
[Sat Jun 22 00:49:20 2013] 660.355000 total counts/ 500.803000 bgd. counts: snr = 7.129660
Spatial fit parameters:
  Offset between fit and detection position for source 84 = 2.177602 pixels
  Position = (271.9, 243.7) = 14 43 16.46 -62 43 11.9
  Extent = 17.3 (17.3-34.6)", rotation angle = 0
  Source counts = 159.6 +/- 25.7
  Background counts = 500.8
  Rate = 0.009 +/- 0.001
[Sat Jun 22 00:49:21 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 00:49:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 00:49:21 2013] Assessing source extent using major axis lower bound
[Sat Jun 22 00:49:21 2013] Source does appear to be extended
[Sat Jun 22 00:49:21 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 00:49:21 2013] Source is confused with source 90
[Sat Jun 22 00:49:21 2013] Source is confused with source 132
[Sat Jun 22 00:50:44 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 22 00:50:44 2013] Initial guess for spatial extent in simple fitting = 17.32"
[Sat Jun 22 00:50:44 2013] source mask rpix=4.0, npix_max = 80, mask sum = 81, frac = 1.009
[Sat Jun 22 00:50:44 2013] Giving source the simple spatial ID 63 for pass 1, mean size = 17.32"
[Sat Jun 22 00:50:47 2013] fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_src63.ximg exists
[Sat Jun 22 00:50:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_src63.csv
[Sat Jun 22 00:50:47 2013] fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_src63_1.ximg exists
[Sat Jun 22 00:50:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_src63.csv
[Sat Jun 22 00:50:47 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_src63_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:50:54 2013] fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src63.ximg exists
[Sat Jun 22 00:50:54 2013] fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src63_1.ximg exists
[Sat Jun 22 00:50:54 2013] Fit fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src63 appears to have run properly
[Sat Jun 22 00:52:03 2013] Warning, spatial fit 63 centroid is now closest to src. 80
[Sat Jun 22 00:52:03 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 00:52:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 00:52:03 2013] Assessing source extent using major axis lower bound
[Sat Jun 22 00:52:03 2013] Source does appear to be extended
[Sat Jun 22 00:52:03 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 04:08:22 2013] XMMSAS src. selection expression = ellipse(23608.448000, 21154.230800, 1038.960030, 1038.960030, 0.000000, X, Y)
[Sat Jun 22 04:08:22 2013] Not overwriting source region fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src84_src.reg
[Sat Jun 22 04:08:22 2013] Extracting stamp from image fullrun_mos1_xmm0110010701_pi300-10000_cl_sm2.00.img.gz, (212, 184) - (332, 303)
[Sat Jun 22 04:08:22 2013] XMMSAS bgd. selection expression = annulus(23608.448000, 21154.230800, 1731.600050, 3463.200100, X, Y) && !ellipse(28477.060000, 21361.838000, 2930.984084, 2930.984084, 0.000000, X, Y) && !ellipse(26087.573883, 19604.557861, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24557.528000, 20849.516000, 1764.296051, 1764.296051, 0.000000, X, Y) && !ellipse(23950.868600, 21044.874000, 1361.752039, 1361.752039, 0.000000, X, Y) && !ellipse(27057.098000, 19320.660000, 1470.320042, 1470.320042, 0.000000, X, Y) && !ellipse(23343.206000, 21477.058000, 2723.504078, 2723.504078, 0.000000, X, Y)
[Sat Jun 22 04:08:22 2013] Writing fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src84.gif
[Sat Jun 22 04:08:26 2013] ../../xmm0110010701/products/events/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src84_src.evt and ../../xmm0110010701/products/events/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src84_bgd.evt exist, delete to re-create
[Sat Jun 22 04:08:26 2013] Mean detx,y = (-5037.82, -5060.73) 
[Sat Jun 22 04:08:26 2013] ../../xmm0110010701/products/images/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src84_src.img and ../../xmm0110010701/products/images/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src84_bgd.img exist, delete to re-create
[Sat Jun 22 04:08:26 2013] ../../xmm0110010701/products/spectra/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src84_src_b10.pi.gz and ../../xmm0110010701/products/spectra/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src84_bgd.pi exist, delete to re-create
[Sat Jun 22 04:08:26 2013] Setting source spectrum file to fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src84_src_b10.pi.gz
[Sat Jun 22 04:08:26 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src84_bgd.pi.gz
[Sat Jun 22 04:08:26 2013] ../../xmm0110010701/products/lightcurves/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src84_src.lc and ../../xmm0110010701/products/lightcurves/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src84_bgd.lc exist, delete to re-create
[Sat Jun 22 04:08:49 2013] fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src84.rmf exists, delete to re-create
[Sat Jun 22 04:08:49 2013] fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src84.arf exists, delete to re-create
[Sat Jun 22 04:11:03 2013] Updating aperture counts using extracted products
[Sat Jun 22 04:11:03 2013] Total counts from fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src84_src_b10.pi.gz = 1111.00
[Sat Jun 22 04:11:03 2013] Total counts from fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src84_bgd.pi.gz = 1551.00
[Sat Jun 22 04:11:03 2013] Got source and background scale factors 3384000.000000, 9340538.000000
[Sat Jun 22 04:11:03 2013] User source parameters:
  Position = (271.9, 243.7) = 14 43 16.46 -62 43 11.9
  Extent = 17.3 (17.3-34.6)", rotation angle = 0
  Source aperture counts = 549.1 +/- 34.3
  Background aperture counts = 561.9
  Rate = 0.03 +/- 0.002

[Sat Jun 22 04:11:13 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 22 04:11:13 2013] Using photon index=1.80, rate=0.0092, arf fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src84.arf
[Sat Jun 22 04:11:13 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 22 04:11:13 2013] Updating source flux to 1.8e-13
[Sat Jun 22 04:11:51 2013] Flag c found in src. 84 procflags, skipping spectral fitting
[Sat Jun 22 04:13:00 2013] xmm0110010701/analysis//spectral/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src84_pl.csv not found, spectral fit skipped or did not complete