[Sat Jun 22 00:45:47 2013] Detection parameters:
  Position = (338.8, 243.8) = 14 42 34.16 -62 43 10.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 146.9 +/- 24.2
  Background counts = 170.8
  Rate = 0.01 +/- 0.002

[Sat Jun 22 00:45:52 2013] Off-axis axis estimate = 4.93'
[Sat Jun 22 00:47:53 2013] Using EEF radius (= 8.89 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 00:47:53 2013] Initial guess for spatial extent in simple fitting = 8.89"
[Sat Jun 22 00:47:53 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.966
[Sat Jun 22 00:47:53 2013] Giving source the simple spatial ID 50 for pass 0, mean size = 8.89"
[Sat Jun 22 00:47:55 2013] fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_src50.ximg exists
[Sat Jun 22 00:47:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_src50.csv
[Sat Jun 22 00:47:55 2013] fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_src50_1.ximg exists
[Sat Jun 22 00:47:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_src50.csv
[Sat Jun 22 00:47:55 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_src50_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:48:00 2013] fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src50.ximg exists
[Sat Jun 22 00:48:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src50.csv
[Sat Jun 22 00:48:00 2013] fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src50_1.ximg exists
[Sat Jun 22 00:48:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src50.csv
[Sat Jun 22 00:48:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src50_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:49:20 2013] Warning, spatial fit 50 centroid is now closest to src. 54
[Sat Jun 22 00:49:21 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 00:49:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 00:49:21 2013] Assessing source extent using major
[Sat Jun 22 00:49:21 2013] Source does appear to be extended
[Sat Jun 22 00:49:21 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 00:49:21 2013] Source is confused with source 19
[Sat Jun 22 00:49:21 2013] Source is confused with source 54
[Sat Jun 22 00:50:44 2013] Using EEF radius (= 8.89 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 00:50:44 2013] Initial guess for spatial extent in simple fitting = 8.89"
[Sat Jun 22 00:50:44 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.966
[Sat Jun 22 00:50:44 2013] Giving source the simple spatial ID 50 for pass 1, mean size = 8.89"
[Sat Jun 22 00:50:46 2013] fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_src50.ximg exists
[Sat Jun 22 00:50:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_src50.csv
[Sat Jun 22 00:50:46 2013] fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_src50_1.ximg exists
[Sat Jun 22 00:50:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_src50.csv
[Sat Jun 22 00:50:46 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_src50_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:50:51 2013] fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src50.ximg exists
[Sat Jun 22 00:50:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src50.csv
[Sat Jun 22 00:50:51 2013] fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src50_1.ximg exists
[Sat Jun 22 00:50:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src50.csv
[Sat Jun 22 00:50:52 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src50_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:52:03 2013] Warning: source 43 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 69 at 12.867377 pixels away
[Sat Jun 22 00:52:03 2013] Warning, spatial fit 50 centroid is now closest to src. 53
[Sat Jun 22 00:52:03 2013] Spatial fit model total counts = 2522.690000, observed total counts = 2329.000000
[Sat Jun 22 00:52:03 2013] Offset between fit and detection position for source 69 = 1.013732 pixels
[Sat Jun 22 00:52:03 2013] Warning, changing simple spatial fit ID from 50 to 53
[Sat Jun 22 00:52:03 2013] 2534.041000 total counts/ 2182.370000 bgd. counts: snr = 7.527874
Spatial fit parameters:
  Offset between fit and detection position for source 69 = 1.013732 pixels
  Position = (338.8, 242.7) = 14 42 34.16 -62 43 16.0
  Extent = 18.0 (17.9-36.0)", rotation angle = 0
  Source counts = 351.7 +/- 50.3
  Background counts = 2182.4
  Rate = 0.02 +/- 0.003
[Sat Jun 22 00:52:03 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 00:52:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 00:52:03 2013] Assessing source extent using major axis lower bound
[Sat Jun 22 00:52:03 2013] Source does appear to be extended
[Sat Jun 22 00:52:03 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 04:08:21 2013] XMMSAS src. selection expression = ellipse(29425.046000, 21070.656000, 1078.986031, 1078.986031, 0.000000, X, Y)
[Sat Jun 22 04:08:21 2013] Not overwriting source region fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src69_src.reg
[Sat Jun 22 04:08:21 2013] Extracting stamp from image fullrun_mos1_xmm0110010701_pi300-10000_cl_sm2.00.img.gz, (277, 181) - (401, 305)
[Sat Jun 22 04:08:21 2013] XMMSAS bgd. selection expression = annulus(29425.046000, 21070.656000, 1798.310052, 3596.620103, X, Y) && !ellipse(30847.222000, 19222.016000, 1538.960044, 1538.960044, 0.000000, X, Y) && !ellipse(32690.250000, 21958.320000, 1508.552043, 1508.552043, 0.000000, X, Y) && !ellipse(30571.036000, 19328.262000, 776.967222, 776.967222, 0.000000, X, Y) && !ellipse(32354.626000, 17823.294000, 1717.472049, 1717.472049, 0.000000, X, Y) && !ellipse(33936.439400, 22829.421800, 972.696028, 972.696028, 0.000000, X, Y) && !ellipse(30484.135132, 19772.220306, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31580.627716, 19867.420364, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29494.038000, 20359.038000, 1046.792030, 1046.792030, 0.000000, X, Y) && !ellipse(33556.422000, 17785.638000, 1793.656052, 1793.656052, 0.000000, X, Y) && !ellipse(29318.686000, 20474.428000, 1497.520043, 1497.520043, 0.000000, X, Y) && !ellipse(34555.087000, 23592.116000, 1626.840047, 1626.840047, 0.000000, X, Y) && !ellipse(32599.328000, 17817.013000, 1494.416043, 1494.416043, 0.000000, X, Y) && !ellipse(33297.691600, 23608.977200, 781.187222, 781.187222, 0.000000, X, Y) && !ellipse(32038.966000, 20414.350000, 1581.032045, 1581.032045, 0.000000, X, Y) && !ellipse(28958.726000, 21190.770000, 1605.632046, 1605.632046, 0.000000, X, Y) && !ellipse(30263.887177, 20983.339798, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33169.106000, 21569.826000, 3162.064091, 3162.064091, 0.000000, X, Y) && !ellipse(31834.084778, 21595.467422, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30521.146000, 21363.608000, 1460.144042, 1460.144042, 0.000000, X, Y) && !ellipse(33714.670000, 20559.536000, 1620.656047, 1620.656047, 0.000000, X, Y) && !ellipse(28477.060000, 21361.838000, 2930.984084, 2930.984084, 0.000000, X, Y) && !ellipse(26087.573883, 19604.557861, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32926.560303, 23359.220642, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31689.906000, 18188.618000, 1590.488046, 1409.672041, 249.181000, X, Y) && !ellipse(29804.421082, 19007.432480, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32459.147705, 23339.127380, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30096.997345, 21404.236282, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33051.646698, 21012.742920, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24557.528000, 20849.516000, 1764.296051, 1764.296051, 0.000000, X, Y) && !ellipse(29885.147000, 23232.180200, 1201.584035, 552.624816, 354.275000, X, Y) && !ellipse(31171.830080, 22915.906200, 1433.112041, 602.178417, 342.720600, X, Y) && !ellipse(31211.240000, 21323.550000, 1517.072044, 1517.072044, 0.000000, X, Y) && !ellipse(29311.598000, 18486.156000, 1557.072045, 1557.072045, 0.000000, X, Y) && !ellipse(27057.098000, 19320.660000, 1470.320042, 1470.320042, 0.000000, X, Y) && !ellipse(23343.206000, 21477.058000, 2723.504078, 2723.504078, 0.000000, X, Y)
[Sat Jun 22 04:08:21 2013] Writing fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src69.gif
[Sat Jun 22 04:08:26 2013] ../../xmm0110010701/products/events/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src69_src.evt and ../../xmm0110010701/products/events/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src69_bgd.evt exist, delete to re-create
[Sat Jun 22 04:08:26 2013] Mean detx,y = (-7319.82, 255.19) 
[Sat Jun 22 04:08:26 2013] ../../xmm0110010701/products/images/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src69_src.img and ../../xmm0110010701/products/images/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src69_bgd.img exist, delete to re-create
[Sat Jun 22 04:08:26 2013] ../../xmm0110010701/products/spectra/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src69_src_b10.pi.gz and ../../xmm0110010701/products/spectra/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src69_bgd.pi exist, delete to re-create
[Sat Jun 22 04:08:26 2013] Setting source spectrum file to fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src69_src_b10.pi.gz
[Sat Jun 22 04:08:26 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src69_bgd.pi.gz
[Sat Jun 22 04:08:26 2013] ../../xmm0110010701/products/lightcurves/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src69_src.lc and ../../xmm0110010701/products/lightcurves/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src69_bgd.lc exist, delete to re-create
[Sat Jun 22 04:08:49 2013] fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src69.rmf exists, delete to re-create
[Sat Jun 22 04:08:49 2013] fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src69.arf exists, delete to re-create
[Sat Jun 22 04:11:00 2013] Updating aperture counts using extracted products
[Sat Jun 22 04:11:00 2013] Total counts from fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src69_src_b10.pi.gz = 4830.00
[Sat Jun 22 04:11:01 2013] Total counts from fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src69_bgd.pi.gz = 1101.00
[Sat Jun 22 04:11:01 2013] Got source and background scale factors 3321772.000000, 1712000.000000
[Sat Jun 22 04:11:01 2013] User source parameters:
  Position = (338.8, 242.7) = 14 42 34.16 -62 43 16.0
  Extent = 18.0 (17.9-36.0)", rotation angle = 0
  Source aperture counts = 2693.7 +/- 70.5
  Background aperture counts = 2136.3
  Rate = 0.2 +/- 0.004

[Sat Jun 22 04:11:12 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 22 04:11:12 2013] Using photon index=1.80, rate=0.0203, arf fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src69.arf
[Sat Jun 22 04:11:12 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 22 04:11:12 2013] Updating source flux to 3.8e-13
[Sat Jun 22 04:11:51 2013] Flag c found in src. 69 procflags, skipping spectral fitting
[Sat Jun 22 04:13:00 2013] xmm0110010701/analysis//spectral/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src69_pl.csv not found, spectral fit skipped or did not complete