[Sat Jun 22 00:45:47 2013] Detection parameters:
  Position = (373.7, 268.8) = 14 42 12.14 -62 41 24.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 148.0 +/- 22.7
  Background counts = 150.5
  Rate = 0.01 +/- 0.002

[Sat Jun 22 00:45:52 2013] Off-axis axis estimate = 5.86'
[Sat Jun 22 00:47:53 2013] Using EEF radius (= 9.36 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 00:47:53 2013] Initial guess for spatial extent in simple fitting = 9.36"
[Sat Jun 22 00:47:53 2013] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.889
[Sat Jun 22 00:47:53 2013] Giving source the simple spatial ID 51 for pass 0, mean size = 9.36"
[Sat Jun 22 00:47:55 2013] fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_src51.ximg exists
[Sat Jun 22 00:47:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_src51.csv
[Sat Jun 22 00:47:55 2013] fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_src51_1.ximg exists
[Sat Jun 22 00:47:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_src51.csv
[Sat Jun 22 00:47:55 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_src51_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:48:00 2013] fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src51.ximg exists
[Sat Jun 22 00:48:00 2013] fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src51_1.ximg exists
[Sat Jun 22 00:48:00 2013] Fit fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src51 appears to have run properly
[Sat Jun 22 00:49:20 2013] Warning: source 51 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 68 at 10.704997 pixels away
[Sat Jun 22 00:49:21 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 00:49:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 00:49:21 2013] Assessing source extent using major
[Sat Jun 22 00:49:21 2013] Source does appear to be extended
[Sat Jun 22 00:49:21 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 00:49:21 2013] Source is confused with source 46
[Sat Jun 22 00:50:44 2013] Using EEF radius (= 9.36 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 00:50:44 2013] Initial guess for spatial extent in simple fitting = 9.36"
[Sat Jun 22 00:50:44 2013] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.889
[Sat Jun 22 00:50:44 2013] Giving source the simple spatial ID 51 for pass 1, mean size = 9.36"
[Sat Jun 22 00:50:46 2013] fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_src51.ximg exists
[Sat Jun 22 00:50:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_src51.csv
[Sat Jun 22 00:50:46 2013] fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_src51_1.ximg exists
[Sat Jun 22 00:50:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_src51.csv
[Sat Jun 22 00:50:46 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_src51_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:50:52 2013] fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src51.ximg exists
[Sat Jun 22 00:50:52 2013] fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src51_1.ximg exists
[Sat Jun 22 00:50:52 2013] Fit fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src51 appears to have run properly
[Sat Jun 22 00:52:03 2013] Source 68 is offset by 3.634158 and 4.840269 pixels which is larger than
2 X fitted extent = 1.122878 x 1.122878, not incorporating fit results
[Sat Jun 22 00:52:03 2013] Source 68 is offset by 3.921675 and 8.093855 pixels which is larger than
2 X fitted extent = 1.096317 x 1.096317, not incorporating fit results
[Sat Jun 22 00:52:03 2013] Warning: source 51 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 68 at 10.510635 pixels away
[Sat Jun 22 00:52:03 2013] Source 68 is offset by 3.454043 and -7.373777 pixels which is larger than
2 X fitted extent = 1.462133 x 1.462133, not incorporating fit results
[Sat Jun 22 00:52:03 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 00:52:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 00:52:03 2013] Assessing source extent using major
[Sat Jun 22 00:52:03 2013] Source does appear to be extended
[Sat Jun 22 00:52:03 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 04:08:21 2013] XMMSAS src. selection expression = ellipse(32459.147705, 23339.127380, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 22 04:08:21 2013] Not overwriting source region fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src68_src.reg
[Sat Jun 22 04:08:21 2013] Extracting stamp from image fullrun_mos1_xmm0110010701_pi300-10000_cl_sm2.00.img.gz, (336, 231) - (411, 306)
[Sat Jun 22 04:08:21 2013] XMMSAS bgd. selection expression = annulus(32459.147705, 23339.127380, 1087.500000, 2175.000000, X, Y) && !ellipse(32690.250000, 21958.320000, 1508.552043, 1508.552043, 0.000000, X, Y) && !ellipse(33936.439400, 22829.421800, 972.696028, 972.696028, 0.000000, X, Y) && !ellipse(35202.188568, 21869.227493, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36305.310000, 21342.568000, 1806.560052, 1806.560052, 0.000000, X, Y) && !ellipse(29494.038000, 20359.038000, 1046.792030, 1046.792030, 0.000000, X, Y) && !ellipse(29318.686000, 20474.428000, 1497.520043, 1497.520043, 0.000000, X, Y) && !ellipse(34555.087000, 23592.116000, 1626.840047, 1626.840047, 0.000000, X, Y) && !ellipse(35020.878000, 20884.520000, 1717.832049, 1717.832049, 0.000000, X, Y) && !ellipse(33297.691600, 23608.977200, 781.187222, 781.187222, 0.000000, X, Y) && !ellipse(32038.966000, 20414.350000, 1581.032045, 1581.032045, 0.000000, X, Y) && !ellipse(28958.726000, 21190.770000, 1605.632046, 1605.632046, 0.000000, X, Y) && !ellipse(30263.887177, 20983.339798, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33169.106000, 21569.826000, 3162.064091, 3162.064091, 0.000000, X, Y) && !ellipse(31834.084778, 21595.467422, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30521.146000, 21363.608000, 1460.144042, 1460.144042, 0.000000, X, Y) && !ellipse(33714.670000, 20559.536000, 1620.656047, 1620.656047, 0.000000, X, Y) && !ellipse(28477.060000, 21361.838000, 2930.984084, 2930.984084, 0.000000, X, Y) && !ellipse(32926.560303, 23359.220642, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29425.046000, 21070.656000, 1438.648041, 1438.648041, 0.000000, X, Y) && !ellipse(30096.997345, 21404.236282, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33051.646698, 21012.742920, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29885.147000, 23232.180200, 1201.584035, 552.624816, 354.275000, X, Y) && !ellipse(31171.830080, 22915.906200, 1433.112041, 602.178417, 342.720600, X, Y) && !ellipse(31211.240000, 21323.550000, 1517.072044, 1517.072044, 0.000000, X, Y)
[Sat Jun 22 04:08:21 2013] Writing fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src68.gif
[Sat Jun 22 04:08:26 2013] ../../xmm0110010701/products/events/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src68_src.evt and ../../xmm0110010701/products/events/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src68_bgd.evt exist, delete to re-create
[Sat Jun 22 04:08:26 2013] Mean detx,y = (-6110.72, 3901.60) 
[Sat Jun 22 04:08:26 2013] ../../xmm0110010701/products/images/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src68_src.img and ../../xmm0110010701/products/images/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src68_bgd.img exist, delete to re-create
[Sat Jun 22 04:08:26 2013] ../../xmm0110010701/products/spectra/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src68_src_b10.pi.gz and ../../xmm0110010701/products/spectra/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src68_bgd.pi exist, delete to re-create
[Sat Jun 22 04:08:26 2013] Setting source spectrum file to fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src68_src_b10.pi.gz
[Sat Jun 22 04:08:26 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src68_bgd.pi.gz
[Sat Jun 22 04:08:26 2013] ../../xmm0110010701/products/lightcurves/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src68_src.lc and ../../xmm0110010701/products/lightcurves/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src68_bgd.lc exist, delete to re-create
[Sat Jun 22 04:08:49 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 22 04:08:49 2013] rmf not generated due to insufficient counts
[Sat Jun 22 04:08:49 2013] fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src68.arf exists, delete to re-create
[Sat Jun 22 04:11:01 2013] Updating aperture counts using extracted products
[Sat Jun 22 04:11:01 2013] Total counts from fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src68_src_b10.pi.gz = 1467.00
[Sat Jun 22 04:11:01 2013] Total counts from fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src68_bgd.pi.gz = 1687.00
[Sat Jun 22 04:11:01 2013] Got source and background scale factors 1199488.000000, 2800000.000000
[Sat Jun 22 04:11:01 2013] User source parameters:
  Position = (373.7, 268.8) = 14 42 12.14 -62 41 24.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 744.3 +/- 39.3
  Background aperture counts = 722.7
  Rate = 0.04 +/- 0.002

[Sat Jun 22 04:11:01 2013] Updating counts from extracted products
[Sat Jun 22 04:11:01 2013] Set source signif. to 744.31/26.88 = 27.69
[Sat Jun 22 04:11:12 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 22 04:11:12 2013] Using photon index=1.80, rate=0.0429, arf fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src68.arf
[Sat Jun 22 04:11:12 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 22 04:11:12 2013] Updating source flux to 8.6e-13
[Sat Jun 22 04:11:51 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 22 04:13:00 2013] xmm0110010701/analysis//spectral/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src68_pl.csv not found, spectral fit skipped or did not complete