[Sat Jun 22 00:45:45 2013] Detection parameters:
  Position = (412.0, 269.9) = 14 41 47.90 -62 41 15.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 213.0 +/- 25.8
  Background counts = 147.3
  Rate = 0.02 +/- 0.002

[Sat Jun 22 00:45:52 2013] Off-axis axis estimate = 8.49'
[Sat Jun 22 00:47:53 2013] Using EEF radius (= 10.67 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 00:47:53 2013] Initial guess for spatial extent in simple fitting = 10.67"
[Sat Jun 22 00:47:53 2013] source mask rpix=2.5, npix_max = 34, mask sum = 36, frac = 1.032
[Sat Jun 22 00:47:53 2013] Giving source the simple spatial ID 32 for pass 0, mean size = 10.67"
[Sat Jun 22 00:47:55 2013] fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_src32.ximg exists
[Sat Jun 22 00:47:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_src32.csv
[Sat Jun 22 00:47:55 2013] fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_src32_1.ximg exists
[Sat Jun 22 00:47:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_src32.csv
[Sat Jun 22 00:47:55 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:47:59 2013] fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src32.ximg exists
[Sat Jun 22 00:47:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src32.csv
[Sat Jun 22 00:47:59 2013] fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src32_1.ximg exists
[Sat Jun 22 00:47:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src32.csv
[Sat Jun 22 00:47:59 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:49:20 2013] Warning, spatial fit 32 centroid is now closest to src. 15
[Sat Jun 22 00:49:20 2013] Warning: source 45 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 45 at 10.762937 pixels away
[Sat Jun 22 00:49:21 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 00:49:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 00:49:21 2013] Assessing source extent using major
[Sat Jun 22 00:49:21 2013] Source does appear to be extended
[Sat Jun 22 00:49:21 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 00:50:44 2013] Using EEF radius (= 10.67 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 00:50:44 2013] Initial guess for spatial extent in simple fitting = 10.67"
[Sat Jun 22 00:50:44 2013] source mask rpix=2.5, npix_max = 34, mask sum = 36, frac = 1.032
[Sat Jun 22 00:50:44 2013] Giving source the simple spatial ID 32 for pass 1, mean size = 10.67"
[Sat Jun 22 00:50:46 2013] fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_src32.ximg exists
[Sat Jun 22 00:50:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_src32.csv
[Sat Jun 22 00:50:46 2013] fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_src32_1.ximg exists
[Sat Jun 22 00:50:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_src32.csv
[Sat Jun 22 00:50:46 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:50:49 2013] fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src32.ximg exists
[Sat Jun 22 00:50:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src32.csv
[Sat Jun 22 00:50:49 2013] fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src32_1.ximg exists
[Sat Jun 22 00:50:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src32.csv
[Sat Jun 22 00:50:49 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:52:03 2013] Warning, spatial fit 32 centroid is now closest to src. 48
[Sat Jun 22 00:52:03 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 00:52:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 00:52:03 2013] Assessing source extent using major
[Sat Jun 22 00:52:03 2013] Source does appear to be extended
[Sat Jun 22 00:52:03 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 04:08:18 2013] XMMSAS src. selection expression = ellipse(35796.248718, 23434.246460, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 22 04:08:18 2013] Not overwriting source region fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src45_src.reg
[Sat Jun 22 04:08:18 2013] Extracting stamp from image fullrun_mos1_xmm0110010701_pi300-10000_cl_sm2.00.img.gz, (375, 232) - (450, 307)
[Sat Jun 22 04:08:18 2013] XMMSAS bgd. selection expression = annulus(35796.248718, 23434.246460, 1087.500000, 2175.000000, X, Y) && !ellipse(32690.250000, 21958.320000, 1508.552043, 1508.552043, 0.000000, X, Y) && !ellipse(33936.439400, 22829.421800, 972.696028, 972.696028, 0.000000, X, Y) && !ellipse(35202.188568, 21869.227493, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35639.872803, 21161.780334, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37971.872000, 19898.323800, 1750.176050, 995.160029, 334.893000, X, Y) && !ellipse(36305.310000, 21342.568000, 1806.560052, 1806.560052, 0.000000, X, Y) && !ellipse(34555.087000, 23592.116000, 1626.840047, 1626.840047, 0.000000, X, Y) && !ellipse(38086.800000, 22725.680000, 1853.256053, 1853.256053, 0.000000, X, Y) && !ellipse(37751.032623, 22317.788055, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37388.612000, 22329.896000, 1858.408053, 1858.408053, 0.000000, X, Y) && !ellipse(35020.878000, 20884.520000, 1717.832049, 1717.832049, 0.000000, X, Y) && !ellipse(33297.691600, 23608.977200, 781.187222, 781.187222, 0.000000, X, Y) && !ellipse(36426.073600, 21994.006000, 1524.464044, 1524.464044, 0.000000, X, Y) && !ellipse(33169.106000, 21569.826000, 3162.064091, 3162.064091, 0.000000, X, Y) && !ellipse(37049.586000, 21470.872000, 1853.256053, 1853.256053, 0.000000, X, Y) && !ellipse(33714.670000, 20559.536000, 1620.656047, 1620.656047, 0.000000, X, Y) && !ellipse(36002.109070, 22563.888031, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32926.560303, 23359.220642, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39639.382000, 24169.682000, 1969.624057, 1072.016031, 309.447000, X, Y) && !ellipse(38288.880000, 23223.196000, 1922.448055, 1922.448055, 0.000000, X, Y) && !ellipse(33051.646698, 21012.742920, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38746.446000, 23068.156000, 3716.816107, 3716.816107, 0.000000, X, Y) && !ellipse(40361.964000, 24874.364000, 3295.024095, 3295.024095, 0.000000, X, Y) && !ellipse(39645.742600, 24214.998000, 1952.280056, 1952.280056, 0.000000, X, Y)
[Sat Jun 22 04:08:18 2013] Writing fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src45.gif
[Sat Jun 22 04:08:25 2013] ../../xmm0110010701/products/events/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src45_src.evt and ../../xmm0110010701/products/events/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src45_bgd.evt exist, delete to re-create
[Sat Jun 22 04:08:25 2013] Mean detx,y = (-7179.24, 7044.98) 
[Sat Jun 22 04:08:25 2013] ../../xmm0110010701/products/images/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src45_src.img and ../../xmm0110010701/products/images/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src45_bgd.img exist, delete to re-create
[Sat Jun 22 04:08:25 2013] ../../xmm0110010701/products/spectra/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src45_src_b10.pi.gz and ../../xmm0110010701/products/spectra/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src45_bgd.pi exist, delete to re-create
[Sat Jun 22 04:08:25 2013] Setting source spectrum file to fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src45_src_b10.pi.gz
[Sat Jun 22 04:08:25 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src45_bgd.pi.gz
[Sat Jun 22 04:08:25 2013] ../../xmm0110010701/products/lightcurves/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src45_src.lc and ../../xmm0110010701/products/lightcurves/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src45_bgd.lc exist, delete to re-create
[Sat Jun 22 04:08:49 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 22 04:08:49 2013] rmf not generated due to insufficient counts
[Sat Jun 22 04:08:49 2013] fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src45.arf exists, delete to re-create
[Sat Jun 22 04:10:56 2013] Updating aperture counts using extracted products
[Sat Jun 22 04:10:56 2013] Total counts from fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src45_src_b10.pi.gz = 1647.00
[Sat Jun 22 04:10:56 2013] Total counts from fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src45_bgd.pi.gz = 182.00
[Sat Jun 22 04:10:56 2013] Got source and background scale factors 1245398.000000, 467860.000000
[Sat Jun 22 04:10:56 2013] User source parameters:
  Position = (412.0, 269.9) = 14 41 47.90 -62 41 15.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1162.5 +/- 41.6
  Background aperture counts = 484.5
  Rate = 0.07 +/- 0.002

[Sat Jun 22 04:10:56 2013] Updating counts from extracted products
[Sat Jun 22 04:10:56 2013] Set source signif. to 1162.53/22.01 = 52.82
[Sat Jun 22 04:11:11 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 22 04:11:11 2013] Using photon index=1.80, rate=0.067, arf fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src45.arf
[Sat Jun 22 04:11:11 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 22 04:11:12 2013] Updating source flux to 1.6e-12
[Sat Jun 22 04:11:51 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 22 04:13:00 2013] xmm0110010701/analysis//spectral/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src45_pl.csv not found, spectral fit skipped or did not complete