[Sat Jun 22 00:45:43 2013] Detection parameters:
  Position = (459.9, 432.0) = 14 41 18.29 -62 29 32.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 100.0 +/- 14.8
  Background counts = 21.3
  Rate = 0.006 +/- 0.0009

[Sat Jun 22 00:45:52 2013] Off-axis axis estimate = 15.19'
[Sat Jun 22 00:47:53 2013] Using EEF radius (= 14.02 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 00:47:53 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun 22 00:47:53 2013] Initial guess for spatial extent in simple fitting = 14.02"
[Sat Jun 22 00:47:53 2013] source mask rpix=3.2, npix_max = 55, mask sum = 47, frac = 0.847
[Sat Jun 22 00:47:53 2013] Giving source the simple spatial ID 78 for pass 0, mean size = 14.02"
[Sat Jun 22 00:47:56 2013] fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_src78.ximg exists
[Sat Jun 22 00:47:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_src78.csv
[Sat Jun 22 00:47:56 2013] fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_src78_1.ximg exists
[Sat Jun 22 00:47:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_src78.csv
[Sat Jun 22 00:47:56 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_src78_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_src78.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:48:01 2013] fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src78.ximg exists
[Sat Jun 22 00:48:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src78.csv
[Sat Jun 22 00:48:01 2013] fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src78_1.ximg exists
[Sat Jun 22 00:48:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src78.csv
[Sat Jun 22 00:48:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src78_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src78.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:49:21 2013] Warning, spatial fit 78 centroid is now closest to src. 81
[Sat Jun 22 00:49:21 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 00:49:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 00:49:21 2013] Assessing source extent using major
[Sat Jun 22 00:49:21 2013] Source does appear to be extended
[Sat Jun 22 00:49:21 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 00:49:21 2013] Source is confused with source 63
[Sat Jun 22 00:50:44 2013] Using EEF radius (= 14.02 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 00:50:44 2013] Initial guess for spatial extent in simple fitting = 14.02"
[Sat Jun 22 00:50:44 2013] source mask rpix=3.2, npix_max = 55, mask sum = 47, frac = 0.847
[Sat Jun 22 00:50:44 2013] Giving source the simple spatial ID 75 for pass 1, mean size = 14.02"
[Sat Jun 22 00:50:47 2013] fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_src75.ximg exists
[Sat Jun 22 00:50:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_src75.csv
[Sat Jun 22 00:50:47 2013] fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_src75_1.ximg exists
[Sat Jun 22 00:50:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_src75.csv
[Sat Jun 22 00:50:47 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_src75_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_src75.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:50:55 2013] fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src75.ximg exists
[Sat Jun 22 00:50:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src75.csv
[Sat Jun 22 00:50:55 2013] fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src75_1.ximg exists
[Sat Jun 22 00:50:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src75.csv
[Sat Jun 22 00:50:55 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src75_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src75.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:52:03 2013] Warning, spatial fit 75 centroid is now closest to src. 63
[Sat Jun 22 00:52:03 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 00:52:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 00:52:03 2013] Assessing source extent using major
[Sat Jun 22 00:52:03 2013] Source does appear to be extended
[Sat Jun 22 00:52:03 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 04:08:22 2013] XMMSAS src. selection expression = ellipse(39963.877411, 37532.741425, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 22 04:08:22 2013] Not overwriting source region fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src37_src.reg
[Sat Jun 22 04:08:22 2013] Extracting stamp from image fullrun_mos1_xmm0110010701_pi300-10000_cl_sm2.00.img.gz, (422, 394) - (497, 469)
[Sat Jun 22 04:08:22 2013] XMMSAS bgd. selection expression = annulus(39963.877411, 37532.741425, 1087.500000, 2175.000000, X, Y) && !ellipse(39308.860000, 37696.705200, 2214.160064, 2214.160064, 0.000000, X, Y) && !ellipse(40425.940125, 36230.919495, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37718.734192, 38153.901459, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 22 04:08:22 2013] Writing fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src37.gif
[Sat Jun 22 04:08:26 2013] ../../xmm0110010701/products/events/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src37_src.evt and ../../xmm0110010701/products/events/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src37_bgd.evt exist, delete to re-create
[Sat Jun 22 04:08:26 2013] Mean detx,y = (4644.09, 15651.25) 
[Sat Jun 22 04:08:26 2013] ../../xmm0110010701/products/images/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src37_src.img and ../../xmm0110010701/products/images/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src37_bgd.img exist, delete to re-create
[Sat Jun 22 04:08:26 2013] ../../xmm0110010701/products/spectra/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src37_src_b10.pi.gz and ../../xmm0110010701/products/spectra/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src37_bgd.pi exist, delete to re-create
[Sat Jun 22 04:08:26 2013] Setting source spectrum file to fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src37_src_b10.pi.gz
[Sat Jun 22 04:08:26 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src37_bgd.pi.gz
[Sat Jun 22 04:08:26 2013] ../../xmm0110010701/products/lightcurves/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src37_src.lc and ../../xmm0110010701/products/lightcurves/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src37_bgd.lc exist, delete to re-create
[Sat Jun 22 04:08:49 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 22 04:08:49 2013] rmf not generated due to insufficient counts
[Sat Jun 22 04:08:49 2013] fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src37.arf exists, delete to re-create
[Sat Jun 22 04:11:06 2013] Updating aperture counts using extracted products
[Sat Jun 22 04:11:06 2013] Total counts from fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src37_src_b10.pi.gz = 348.00
[Sat Jun 22 04:11:06 2013] Total counts from fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src37_bgd.pi.gz = 22.00
[Sat Jun 22 04:11:06 2013] Got source and background scale factors 534974.000000, 0.000000
[Sat Jun 22 04:11:06 2013] Background scale factor is not positive, halting re-assessment of this source
[Sat Jun 22 04:11:14 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 22 04:11:14 2013] Using photon index=1.80, rate=0.00576, arf fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src37.arf
[Sat Jun 22 04:11:14 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 22 04:11:14 2013] Updating source flux to 2.9e-13
[Sat Jun 22 04:11:51 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 22 04:13:00 2013] xmm0110010701/analysis//spectral/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src37_pl.csv not found, spectral fit skipped or did not complete