[Sat Jun 22 00:45:42 2013] Detection parameters:
  Position = (392.5, 206.0) = 14 42 0.05 -62 45 56.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 361.1 +/- 28.6
  Background counts = 61.2
  Rate = 0.02 +/- 0.002

[Sat Jun 22 00:45:52 2013] Off-axis axis estimate = 9.56'
[Sat Jun 22 00:47:53 2013] Using EEF radius (= 11.21 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 00:47:53 2013] Initial guess for spatial extent in simple fitting = 11.21"
[Sat Jun 22 00:47:53 2013] source mask rpix=2.6, npix_max = 37, mask sum = 42, frac = 1.109
[Sat Jun 22 00:47:53 2013] Giving source the simple spatial ID 31 for pass 0, mean size = 11.21"
[Sat Jun 22 00:47:55 2013] fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_src31.ximg exists
[Sat Jun 22 00:47:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_src31.csv
[Sat Jun 22 00:47:55 2013] fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_src31_1.ximg exists
[Sat Jun 22 00:47:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_src31.csv
[Sat Jun 22 00:47:55 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:47:59 2013] fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Sat Jun 22 00:47:59 2013] fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Sat Jun 22 00:47:59 2013] Fit fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src31 appears to have run properly
[Sat Jun 22 00:49:20 2013] Warning: source 23 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 24 at 11.322579 pixels away
[Sat Jun 22 00:49:20 2013] Warning, spatial fit 31 centroid is now closest to src. 8
[Sat Jun 22 00:49:21 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 00:49:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 00:49:21 2013] Assessing source extent using major
[Sat Jun 22 00:49:21 2013] Source does appear to be extended
[Sat Jun 22 00:49:21 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 00:49:21 2013] Source is confused with source 8
[Sat Jun 22 00:50:44 2013] Using EEF radius (= 11.21 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 00:50:44 2013] Initial guess for spatial extent in simple fitting = 11.21"
[Sat Jun 22 00:50:44 2013] source mask rpix=2.6, npix_max = 37, mask sum = 42, frac = 1.109
[Sat Jun 22 00:50:44 2013] Giving source the simple spatial ID 31 for pass 1, mean size = 11.21"
[Sat Jun 22 00:50:46 2013] fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_src31.ximg exists
[Sat Jun 22 00:50:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_src31.csv
[Sat Jun 22 00:50:46 2013] fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_src31_1.ximg exists
[Sat Jun 22 00:50:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_src31.csv
[Sat Jun 22 00:50:46 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:50:49 2013] fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src31.ximg exists
[Sat Jun 22 00:50:49 2013] fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src31_1.ximg exists
[Sat Jun 22 00:50:49 2013] Fit fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src31 appears to have run properly
[Sat Jun 22 00:52:03 2013] Warning, spatial fit 31 centroid is now closest to src. 8
[Sat Jun 22 00:52:03 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 00:52:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 00:52:03 2013] Assessing source extent using major
[Sat Jun 22 00:52:03 2013] Source does appear to be extended
[Sat Jun 22 00:52:03 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 04:08:18 2013] XMMSAS src. selection expression = ellipse(34101.296600, 17872.038406, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 22 04:08:18 2013] Not overwriting source region fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src24_src.reg
[Sat Jun 22 04:08:18 2013] Extracting stamp from image fullrun_mos1_xmm0110010701_pi300-10000_cl_sm2.00.img.gz, (355, 168) - (430, 243)
[Sat Jun 22 04:08:18 2013] XMMSAS bgd. selection expression = annulus(34101.296600, 17872.038406, 1087.500000, 2175.000000, X, Y) && !ellipse(30847.222000, 19222.016000, 1538.960044, 1538.960044, 0.000000, X, Y) && !ellipse(32354.626000, 17823.294000, 1717.472049, 1717.472049, 0.000000, X, Y) && !ellipse(37971.872000, 19898.323800, 1750.176050, 995.160029, 334.893000, X, Y) && !ellipse(31580.627716, 19867.420364, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36305.310000, 21342.568000, 1806.560052, 1806.560052, 0.000000, X, Y) && !ellipse(33556.422000, 17785.638000, 1793.656052, 1793.656052, 0.000000, X, Y) && !ellipse(32599.328000, 17817.013000, 1494.416043, 1494.416043, 0.000000, X, Y) && !ellipse(35020.878000, 20884.520000, 1717.832049, 1717.832049, 0.000000, X, Y) && !ellipse(32038.966000, 20414.350000, 1581.032045, 1581.032045, 0.000000, X, Y) && !ellipse(33169.106000, 21569.826000, 3162.064091, 3162.064091, 0.000000, X, Y) && !ellipse(35147.502960, 19404.384600, 1072.800031, 1072.800031, 0.000000, X, Y) && !ellipse(30521.146000, 21363.608000, 1460.144042, 1460.144042, 0.000000, X, Y) && !ellipse(37049.586000, 21470.872000, 1853.256053, 1853.256053, 0.000000, X, Y) && !ellipse(33714.670000, 20559.536000, 1620.656047, 1620.656047, 0.000000, X, Y) && !ellipse(31689.906000, 18188.618000, 1590.488046, 1409.672041, 249.181000, X, Y) && !ellipse(31211.240000, 21323.550000, 1517.072044, 1517.072044, 0.000000, X, Y) && !ellipse(38746.446000, 23068.156000, 3716.816107, 3716.816107, 0.000000, X, Y) && !ellipse(36135.043732, 19608.426239, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35267.158000, 19460.618000, 1645.024047, 1645.024047, 0.000000, X, Y)
[Sat Jun 22 04:08:18 2013] Writing fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src24.gif
[Sat Jun 22 04:08:25 2013] ../../xmm0110010701/products/events/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src24_src.evt and ../../xmm0110010701/products/events/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src24_bgd.evt exist, delete to re-create
[Sat Jun 22 04:08:25 2013] Mean detx,y = (-11756.29, 3501.07) 
[Sat Jun 22 04:08:25 2013] ../../xmm0110010701/products/images/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src24_src.img and ../../xmm0110010701/products/images/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src24_bgd.img exist, delete to re-create
[Sat Jun 22 04:08:25 2013] ../../xmm0110010701/products/spectra/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src24_src_b10.pi.gz and ../../xmm0110010701/products/spectra/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src24_bgd.pi exist, delete to re-create
[Sat Jun 22 04:08:25 2013] Setting source spectrum file to fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Sat Jun 22 04:08:25 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src24_bgd.pi.gz
[Sat Jun 22 04:08:25 2013] ../../xmm0110010701/products/lightcurves/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src24_src.lc and ../../xmm0110010701/products/lightcurves/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src24_bgd.lc exist, delete to re-create
[Sat Jun 22 04:08:49 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 22 04:08:49 2013] rmf not generated due to insufficient counts
[Sat Jun 22 04:08:49 2013] fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src24.arf exists, delete to re-create
[Sat Jun 22 04:10:56 2013] Updating aperture counts using extracted products
[Sat Jun 22 04:10:56 2013] Total counts from fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src24_src_b10.pi.gz = 1692.00
[Sat Jun 22 04:10:56 2013] Total counts from fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src24_bgd.pi.gz = 349.00
[Sat Jun 22 04:10:56 2013] Got source and background scale factors 1331200.000000, 2285464.000000
[Sat Jun 22 04:10:56 2013] User source parameters:
  Position = (392.5, 206.0) = 14 42 0.05 -62 45 56.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1488.7 +/- 42.1
  Background aperture counts = 203.3
  Rate = 0.09 +/- 0.002

[Sat Jun 22 04:10:56 2013] Updating counts from extracted products
[Sat Jun 22 04:10:56 2013] Set source signif. to 1488.72/14.26 = 104.42
[Sat Jun 22 04:11:11 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 22 04:11:11 2013] Using photon index=1.80, rate=0.0858, arf fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src24.arf
[Sat Jun 22 04:11:11 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 22 04:11:11 2013] Updating source flux to 2.5e-12
[Sat Jun 22 04:11:51 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 22 04:13:00 2013] xmm0110010701/analysis//spectral/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src24_pl.csv not found, spectral fit skipped or did not complete