[Sat Jun 22 00:45:42 2013] Detection parameters:
  Position = (342.9, 230.9) = 14 42 31.51 -62 44 8.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 393.3 +/- 31.7
  Background counts = 151.3
  Rate = 0.03 +/- 0.003

[Sat Jun 22 00:45:52 2013] Off-axis axis estimate = 5.86'
[Sat Jun 22 00:47:53 2013] Using EEF radius (= 9.36 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 00:47:53 2013] Initial guess for spatial extent in simple fitting = 9.36"
[Sat Jun 22 00:47:53 2013] source mask rpix=2.2, npix_max = 28, mask sum = 36, frac = 1.280
[Sat Jun 22 00:47:53 2013] Giving source the simple spatial ID 19 for pass 0, mean size = 9.36"
[Sat Jun 22 00:47:54 2013] fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_src19.ximg exists
[Sat Jun 22 00:47:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_src19.csv
[Sat Jun 22 00:47:54 2013] fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_src19_1.ximg exists
[Sat Jun 22 00:47:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_src19.csv
[Sat Jun 22 00:47:54 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:47:58 2013] fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Sat Jun 22 00:47:58 2013] fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Sat Jun 22 00:47:58 2013] Fit fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Sat Jun 22 00:49:20 2013] Warning, spatial fit 19 centroid is now closest to src. 19
[Sat Jun 22 00:49:20 2013] Spatial fit model total counts = 3319.560000, observed total counts = 3308.000000
[Sat Jun 22 00:49:20 2013] Offset between fit and detection position for source 22 = 2.696414 pixels
[Sat Jun 22 00:49:20 2013] Warning, changing simple spatial fit ID from 19 to 21
[Sat Jun 22 00:49:20 2013] 3287.020000 total counts/ 1992.020000 bgd. counts: snr = 29.015023
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 2.696414 pixels
  Position = (340.5, 232.0) = 14 42 33.07 -62 44 2.6
  Extent = 18.3 (18.1-36.6)", rotation angle = 0
  Source counts = 1295.0 +/- 57.3
  Background counts = 1992.0
  Rate = 0.07 +/- 0.003
[Sat Jun 22 00:49:20 2013] Spatial fit model total counts = 2806.820000, observed total counts = 2765.000000
[Sat Jun 22 00:49:20 2013] Offset between fit and detection position for source 22 = 2.687316 pixels
[Sat Jun 22 00:49:20 2013] Warning, changing simple spatial fit ID from 21 to 36
[Sat Jun 22 00:49:20 2013] 2768.202000 total counts/ 2636.380000 bgd. counts: snr = 2.567343
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 2.687316 pixels
  Position = (339.6, 234.6) = 14 42 33.64 -62 43 51.6
  Extent = 12.6 (6.8-18.3)", rotation angle = 0
  Source counts = 131.8 +/- 52.6
  Background counts = 2636.4
  Rate = 0.008 +/- 0.003
[Sat Jun 22 00:49:21 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 00:49:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 00:49:21 2013] Assessing source extent using major axis lower bound
[Sat Jun 22 00:49:21 2013] Source does appear to be extended
[Sat Jun 22 00:49:21 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 00:49:21 2013] Source is confused with source 19
[Sat Jun 22 00:49:21 2013] Source is confused with source 54
[Sat Jun 22 00:50:44 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 22 00:50:44 2013] Initial guess for spatial extent in simple fitting = 12.62"
[Sat Jun 22 00:50:44 2013] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.059
[Sat Jun 22 00:50:44 2013] Giving source the simple spatial ID 19 for pass 1, mean size = 12.62"
[Sat Jun 22 00:50:46 2013] fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_src19.ximg exists
[Sat Jun 22 00:50:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_src19.csv
[Sat Jun 22 00:50:46 2013] fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_src19_1.ximg exists
[Sat Jun 22 00:50:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_src19.csv
[Sat Jun 22 00:50:46 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:50:49 2013] fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Sat Jun 22 00:50:49 2013] fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Sat Jun 22 00:50:49 2013] Fit fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Sat Jun 22 00:52:03 2013] Warning, spatial fit 19 centroid is now closest to src. 54
[Sat Jun 22 00:52:03 2013] Spatial fit model total counts = 2856.770000, observed total counts = 2584.000000
[Sat Jun 22 00:52:03 2013] Poor agreement between spatial fit and data for source 22
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 22 00:52:03 2013] Spatial fit model total counts = 2805.370000, observed total counts = 2765.000000
[Sat Jun 22 00:52:03 2013] Offset between fit and detection position for source 22 = 0.008598 pixels
[Sat Jun 22 00:52:03 2013] Warning, changing simple spatial fit ID from 19 to 36
[Sat Jun 22 00:52:03 2013] 2748.788000 total counts/ 2593.440000 bgd. counts: snr = 3.050476
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 0.008598 pixels
  Position = (339.6, 234.6) = 14 42 33.64 -62 43 51.6
  Extent = 13.1 (8.8-18.3)", rotation angle = 0
  Source counts = 155.3 +/- 52.4
  Background counts = 2593.4
  Rate = 0.009 +/- 0.003
[Sat Jun 22 00:52:03 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 00:52:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 00:52:03 2013] Assessing source extent using major axis lower bound
[Sat Jun 22 00:52:03 2013] Source does appear to be extended
[Sat Jun 22 00:52:03 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 04:08:16 2013] XMMSAS src. selection expression = ellipse(29494.038000, 20359.038000, 785.094023, 785.094023, 0.000000, X, Y)
[Sat Jun 22 04:08:16 2013] Not overwriting source region fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src22_src.reg
[Sat Jun 22 04:08:16 2013] Extracting stamp from image fullrun_mos1_xmm0110010701_pi300-10000_cl_sm2.00.img.gz, (294, 189) - (385, 280)
[Sat Jun 22 04:08:16 2013] XMMSAS bgd. selection expression = annulus(29494.038000, 20359.038000, 1308.490038, 2616.980075, X, Y) && !ellipse(30847.222000, 19222.016000, 1538.960044, 1538.960044, 0.000000, X, Y) && !ellipse(32690.250000, 21958.320000, 1508.552043, 1508.552043, 0.000000, X, Y) && !ellipse(30571.036000, 19328.262000, 776.967222, 776.967222, 0.000000, X, Y) && !ellipse(32354.626000, 17823.294000, 1717.472049, 1717.472049, 0.000000, X, Y) && !ellipse(30484.135132, 19772.220306, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31580.627716, 19867.420364, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33556.422000, 17785.638000, 1793.656052, 1793.656052, 0.000000, X, Y) && !ellipse(29318.686000, 20474.428000, 1497.520043, 1497.520043, 0.000000, X, Y) && !ellipse(32599.328000, 17817.013000, 1494.416043, 1494.416043, 0.000000, X, Y) && !ellipse(32038.966000, 20414.350000, 1581.032045, 1581.032045, 0.000000, X, Y) && !ellipse(28958.726000, 21190.770000, 1605.632046, 1605.632046, 0.000000, X, Y) && !ellipse(30263.887177, 20983.339798, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33169.106000, 21569.826000, 3162.064091, 3162.064091, 0.000000, X, Y) && !ellipse(31834.084778, 21595.467422, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30521.146000, 21363.608000, 1460.144042, 1460.144042, 0.000000, X, Y) && !ellipse(33714.670000, 20559.536000, 1620.656047, 1620.656047, 0.000000, X, Y) && !ellipse(28477.060000, 21361.838000, 2930.984084, 2930.984084, 0.000000, X, Y) && !ellipse(26087.573883, 19604.557861, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32926.560303, 23359.220642, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31689.906000, 18188.618000, 1590.488046, 1409.672041, 249.181000, X, Y) && !ellipse(29804.421082, 19007.432480, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29425.046000, 21070.656000, 1438.648041, 1438.648041, 0.000000, X, Y) && !ellipse(32459.147705, 23339.127380, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30096.997345, 21404.236282, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29885.147000, 23232.180200, 1201.584035, 552.624816, 354.275000, X, Y) && !ellipse(31171.830080, 22915.906200, 1433.112041, 602.178417, 342.720600, X, Y) && !ellipse(31211.240000, 21323.550000, 1517.072044, 1517.072044, 0.000000, X, Y) && !ellipse(29311.598000, 18486.156000, 1557.072045, 1557.072045, 0.000000, X, Y) && !ellipse(27057.098000, 19320.660000, 1470.320042, 1470.320042, 0.000000, X, Y)
[Sat Jun 22 04:08:16 2013] Writing fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src22.gif
[Sat Jun 22 04:08:25 2013] ../../xmm0110010701/products/events/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src22_src.evt and ../../xmm0110010701/products/events/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src22_bgd.evt exist, delete to re-create
[Sat Jun 22 04:08:25 2013] Mean detx,y = (-7880.21, 115.16) 
[Sat Jun 22 04:08:25 2013] ../../xmm0110010701/products/images/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src22_src.img and ../../xmm0110010701/products/images/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src22_bgd.img exist, delete to re-create
[Sat Jun 22 04:08:25 2013] ../../xmm0110010701/products/spectra/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src22_src_b10.pi.gz and ../../xmm0110010701/products/spectra/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src22_bgd.pi exist, delete to re-create
[Sat Jun 22 04:08:25 2013] Setting source spectrum file to fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Sat Jun 22 04:08:25 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Sat Jun 22 04:08:25 2013] ../../xmm0110010701/products/lightcurves/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src22_src.lc and ../../xmm0110010701/products/lightcurves/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src22_bgd.lc exist, delete to re-create
[Sat Jun 22 04:08:49 2013] fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src22.rmf exists, delete to re-create
[Sat Jun 22 04:08:49 2013] fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src22.arf exists, delete to re-create
[Sat Jun 22 04:10:53 2013] Updating aperture counts using extracted products
[Sat Jun 22 04:10:53 2013] Total counts from fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src22_src_b10.pi.gz = 3394.00
[Sat Jun 22 04:10:53 2013] Total counts from fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src22_bgd.pi.gz = 0.00
[Sat Jun 22 04:10:53 2013] Got source and background scale factors 1920176.000000, 0.000000
[Sat Jun 22 04:10:53 2013] Background scale factor is not positive, halting re-assessment of this source
[Sat Jun 22 04:11:11 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 22 04:11:11 2013] Using photon index=1.80, rate=0.00896, arf fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src22.arf
[Sat Jun 22 04:11:11 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 22 04:11:11 2013] Updating source flux to 1.9e-13
[Sat Jun 22 04:11:51 2013] Flag p found in src. 22 procflags, skipping spectral fitting
[Sat Jun 22 04:11:51 2013] Flag c found in src. 22 procflags, skipping spectral fitting
[Sat Jun 22 04:13:00 2013] xmm0110010701/analysis//spectral/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src22_pl.csv not found, spectral fit skipped or did not complete