[Sat Jun 22 00:45:41 2013] Detection parameters:
  Position = (405.2, 251.9) = 14 41 52.16 -62 42 34.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 408.5 +/- 32.0
  Background counts = 161.5
  Rate = 0.04 +/- 0.003

[Sat Jun 22 00:45:52 2013] Off-axis axis estimate = 8.44'
[Sat Jun 22 00:47:53 2013] Using EEF radius (= 10.65 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 00:47:53 2013] Initial guess for spatial extent in simple fitting = 10.65"
[Sat Jun 22 00:47:53 2013] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.035
[Sat Jun 22 00:47:53 2013] Giving source the simple spatial ID 11 for pass 0, mean size = 10.65"
[Sat Jun 22 00:47:54 2013] fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_src11.ximg exists
[Sat Jun 22 00:47:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_src11.csv
[Sat Jun 22 00:47:54 2013] fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_src11_1.ximg exists
[Sat Jun 22 00:47:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_src11.csv
[Sat Jun 22 00:47:54 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:47:58 2013] fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Sat Jun 22 00:47:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src11.csv
[Sat Jun 22 00:47:58 2013] fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Sat Jun 22 00:47:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src11.csv
[Sat Jun 22 00:47:58 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:49:20 2013] Warning, spatial fit 11 centroid is now closest to src. 47
[Sat Jun 22 00:49:20 2013] Source 15 is offset by 2.994926 and -9.257500 pixels which is larger than
2 X fitted extent = 1.226823 x 1.226823, not incorporating fit results
[Sat Jun 22 00:49:21 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 00:49:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 00:49:21 2013] Assessing source extent using major
[Sat Jun 22 00:49:21 2013] Source does appear to be extended
[Sat Jun 22 00:49:21 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 00:49:21 2013] Source is confused with source 17
[Sat Jun 22 00:50:44 2013] Using EEF radius (= 10.65 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 00:50:44 2013] Initial guess for spatial extent in simple fitting = 10.65"
[Sat Jun 22 00:50:44 2013] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.035
[Sat Jun 22 00:50:44 2013] Giving source the simple spatial ID 11 for pass 1, mean size = 10.65"
[Sat Jun 22 00:50:45 2013] fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_src11.ximg exists
[Sat Jun 22 00:50:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_src11.csv
[Sat Jun 22 00:50:45 2013] fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_src11_1.ximg exists
[Sat Jun 22 00:50:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_src11.csv
[Sat Jun 22 00:50:45 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:50:49 2013] fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Sat Jun 22 00:50:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src11.csv
[Sat Jun 22 00:50:49 2013] fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Sat Jun 22 00:50:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src11.csv
[Sat Jun 22 00:50:49 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:52:03 2013] Warning, spatial fit 11 centroid is now closest to src. 47
[Sat Jun 22 00:52:03 2013] Source 15 is offset by 4.854305 and 4.601879 pixels which is larger than
2 X fitted extent = 1.709246 x 1.709246, not incorporating fit results
[Sat Jun 22 00:52:03 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 00:52:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 00:52:03 2013] Assessing source extent using major
[Sat Jun 22 00:52:03 2013] Source does appear to be extended
[Sat Jun 22 00:52:03 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 04:08:15 2013] XMMSAS src. selection expression = ellipse(35202.188568, 21869.227493, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 22 04:08:15 2013] Not overwriting source region fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src15_src.reg
[Sat Jun 22 04:08:15 2013] Extracting stamp from image fullrun_mos1_xmm0110010701_pi300-10000_cl_sm2.00.img.gz, (368, 214) - (443, 289)
[Sat Jun 22 04:08:15 2013] XMMSAS bgd. selection expression = annulus(35202.188568, 21869.227493, 1087.500000, 2175.000000, X, Y) && !ellipse(32690.250000, 21958.320000, 1508.552043, 1508.552043, 0.000000, X, Y) && !ellipse(33936.439400, 22829.421800, 972.696028, 972.696028, 0.000000, X, Y) && !ellipse(35639.872803, 21161.780334, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37971.872000, 19898.323800, 1750.176050, 995.160029, 334.893000, X, Y) && !ellipse(36305.310000, 21342.568000, 1806.560052, 1806.560052, 0.000000, X, Y) && !ellipse(34555.087000, 23592.116000, 1626.840047, 1626.840047, 0.000000, X, Y) && !ellipse(38086.800000, 22725.680000, 1853.256053, 1853.256053, 0.000000, X, Y) && !ellipse(37751.032623, 22317.788055, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37388.612000, 22329.896000, 1858.408053, 1858.408053, 0.000000, X, Y) && !ellipse(35020.878000, 20884.520000, 1717.832049, 1717.832049, 0.000000, X, Y) && !ellipse(33297.691600, 23608.977200, 781.187222, 781.187222, 0.000000, X, Y) && !ellipse(35796.248718, 23434.246460, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32038.966000, 20414.350000, 1581.032045, 1581.032045, 0.000000, X, Y) && !ellipse(36426.073600, 21994.006000, 1524.464044, 1524.464044, 0.000000, X, Y) && !ellipse(33169.106000, 21569.826000, 3162.064091, 3162.064091, 0.000000, X, Y) && !ellipse(35147.502960, 19404.384600, 1072.800031, 1072.800031, 0.000000, X, Y) && !ellipse(37049.586000, 21470.872000, 1853.256053, 1853.256053, 0.000000, X, Y) && !ellipse(33714.670000, 20559.536000, 1620.656047, 1620.656047, 0.000000, X, Y) && !ellipse(36002.109070, 22563.888031, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32926.560303, 23359.220642, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31689.906000, 18188.618000, 1590.488046, 1409.672041, 249.181000, X, Y) && !ellipse(32459.147705, 23339.127380, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38288.880000, 23223.196000, 1922.448055, 1922.448055, 0.000000, X, Y) && !ellipse(33051.646698, 21012.742920, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38746.446000, 23068.156000, 3716.816107, 3716.816107, 0.000000, X, Y) && !ellipse(36135.043732, 19608.426239, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35267.158000, 19460.618000, 1645.024047, 1645.024047, 0.000000, X, Y) && !ellipse(40361.964000, 24874.364000, 3295.024095, 3295.024095, 0.000000, X, Y)
[Sat Jun 22 04:08:15 2013] Writing fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src15.gif
[Sat Jun 22 04:08:24 2013] ../../xmm0110010701/products/events/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src15_src.evt and ../../xmm0110010701/products/events/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src15_bgd.evt exist, delete to re-create
[Sat Jun 22 04:08:24 2013] Mean detx,y = (-8414.00, 5904.15) 
[Sat Jun 22 04:08:24 2013] ../../xmm0110010701/products/images/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src15_src.img and ../../xmm0110010701/products/images/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src15_bgd.img exist, delete to re-create
[Sat Jun 22 04:08:24 2013] ../../xmm0110010701/products/spectra/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src15_src_b10.pi.gz and ../../xmm0110010701/products/spectra/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src15_bgd.pi exist, delete to re-create
[Sat Jun 22 04:08:24 2013] Setting source spectrum file to fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Sat Jun 22 04:08:24 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Sat Jun 22 04:08:24 2013] ../../xmm0110010701/products/lightcurves/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src15_src.lc and ../../xmm0110010701/products/lightcurves/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src15_bgd.lc exist, delete to re-create
[Sat Jun 22 04:08:49 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 22 04:08:49 2013] rmf not generated due to insufficient counts
[Sat Jun 22 04:08:49 2013] fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src15.arf exists, delete to re-create
[Sat Jun 22 04:10:51 2013] Updating aperture counts using extracted products
[Sat Jun 22 04:10:51 2013] Total counts from fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src15_src_b10.pi.gz = 2172.00
[Sat Jun 22 04:10:51 2013] Total counts from fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src15_bgd.pi.gz = 0.00
[Sat Jun 22 04:10:51 2013] Got source and background scale factors 1171090.000000, 0.000000
[Sat Jun 22 04:10:51 2013] Background scale factor is not positive, halting re-assessment of this source
[Sat Jun 22 04:11:10 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 22 04:11:10 2013] Using photon index=1.80, rate=0.0413, arf fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src15.arf
[Sat Jun 22 04:11:10 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 22 04:11:10 2013] Updating source flux to 1e-12
[Sat Jun 22 04:11:51 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 22 04:13:00 2013] xmm0110010701/analysis//spectral/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src15_pl.csv not found, spectral fit skipped or did not complete