[Sat Jun 22 00:45:41 2013] Detection parameters:
  Position = (495.8, 279.0) = 14 40 55.00 -62 40 34.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 167.8 +/- 21.8
  Background counts = 94.8
  Rate = 0.01 +/- 0.001

[Sat Jun 22 00:45:52 2013] Off-axis axis estimate = 14.38'
[Sat Jun 22 00:47:53 2013] Using EEF radius (= 13.62 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 00:47:53 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun 22 00:47:53 2013] Initial guess for spatial extent in simple fitting = 13.62"
[Sat Jun 22 00:47:53 2013] source mask rpix=3.1, npix_max = 52, mask sum = 52, frac = 0.986
[Sat Jun 22 00:47:53 2013] Giving source the simple spatial ID 57 for pass 0, mean size = 13.62"
[Sat Jun 22 00:47:55 2013] fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_src57.ximg exists
[Sat Jun 22 00:47:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_src57.csv
[Sat Jun 22 00:47:55 2013] fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_src57_1.ximg exists
[Sat Jun 22 00:47:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_src57.csv
[Sat Jun 22 00:47:55 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_src57_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:48:00 2013] fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src57.ximg exists
[Sat Jun 22 00:48:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src57.csv
[Sat Jun 22 00:48:00 2013] fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src57_1.ximg exists
[Sat Jun 22 00:48:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src57.csv
[Sat Jun 22 00:48:00 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src57_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:49:20 2013] Warning, spatial fit 57 centroid is now closest to src. 9
[Sat Jun 22 00:49:21 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 00:49:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 00:49:21 2013] Assessing source extent using major
[Sat Jun 22 00:49:21 2013] Source does appear to be extended
[Sat Jun 22 00:49:21 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 00:50:44 2013] Using EEF radius (= 13.62 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 00:50:44 2013] Initial guess for spatial extent in simple fitting = 13.62"
[Sat Jun 22 00:50:44 2013] source mask rpix=3.1, npix_max = 52, mask sum = 52, frac = 0.986
[Sat Jun 22 00:50:44 2013] Giving source the simple spatial ID 57 for pass 1, mean size = 13.62"
[Sat Jun 22 00:50:47 2013] fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_src57.ximg exists
[Sat Jun 22 00:50:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_src57.csv
[Sat Jun 22 00:50:47 2013] fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_src57_1.ximg exists
[Sat Jun 22 00:50:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_src57.csv
[Sat Jun 22 00:50:47 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_src57_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:50:54 2013] fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src57.ximg exists
[Sat Jun 22 00:50:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src57.csv
[Sat Jun 22 00:50:54 2013] fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src57_1.ximg exists
[Sat Jun 22 00:50:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src57.csv
[Sat Jun 22 00:50:54 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src57_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:52:03 2013] Warning: source 57 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 10.925055 pixels away
[Sat Jun 22 00:52:03 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 00:52:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 00:52:03 2013] Assessing source extent using major
[Sat Jun 22 00:52:03 2013] Source does appear to be extended
[Sat Jun 22 00:52:03 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 04:08:21 2013] XMMSAS src. selection expression = ellipse(43083.361603, 24220.862610, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 22 04:08:21 2013] Not overwriting source region fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src13_src.reg
[Sat Jun 22 04:08:21 2013] Extracting stamp from image fullrun_mos1_xmm0110010701_pi300-10000_cl_sm2.00.img.gz, (458, 241) - (533, 316)
[Sat Jun 22 04:08:21 2013] XMMSAS bgd. selection expression = annulus(43083.361603, 24220.862610, 1087.500000, 2175.000000, X, Y) && !ellipse(41746.289015, 21705.269038, 2169.288062, 2067.218353, 11.607784, X, Y) && !ellipse(40885.606000, 21367.210000, 1544.768044, 1544.768044, 0.000000, X, Y) && !ellipse(39639.382000, 24169.682000, 1969.624057, 1072.016031, 309.447000, X, Y) && !ellipse(38746.446000, 23068.156000, 3716.816107, 3716.816107, 0.000000, X, Y) && !ellipse(40361.964000, 24874.364000, 3295.024095, 3295.024095, 0.000000, X, Y) && !ellipse(43318.695435, 25712.391693, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39645.742600, 24214.998000, 1952.280056, 1952.280056, 0.000000, X, Y)
[Sat Jun 22 04:08:21 2013] Writing fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src13.gif
[Sat Jun 22 04:08:26 2013] ../../xmm0110010701/products/events/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src13_src.evt and ../../xmm0110010701/products/events/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src13_bgd.evt exist, delete to re-create
[Sat Jun 22 04:08:26 2013] Mean detx,y = (-8842.07, 14007.33) 
[Sat Jun 22 04:08:26 2013] ../../xmm0110010701/products/images/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src13_src.img and ../../xmm0110010701/products/images/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src13_bgd.img exist, delete to re-create
[Sat Jun 22 04:08:26 2013] ../../xmm0110010701/products/spectra/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src13_src_b10.pi.gz and ../../xmm0110010701/products/spectra/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src13_bgd.pi exist, delete to re-create
[Sat Jun 22 04:08:26 2013] Setting source spectrum file to fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Sat Jun 22 04:08:26 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Sat Jun 22 04:08:26 2013] ../../xmm0110010701/products/lightcurves/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src13_src.lc and ../../xmm0110010701/products/lightcurves/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src13_bgd.lc exist, delete to re-create
[Sat Jun 22 04:08:49 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 22 04:08:49 2013] rmf not generated due to insufficient counts
[Sat Jun 22 04:08:49 2013] fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src13.arf exists, delete to re-create
[Sat Jun 22 04:11:02 2013] Updating aperture counts using extracted products
[Sat Jun 22 04:11:02 2013] Total counts from fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src13_src_b10.pi.gz = 748.00
[Sat Jun 22 04:11:02 2013] Total counts from fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src13_bgd.pi.gz = 0.00
[Sat Jun 22 04:11:02 2013] Got source and background scale factors 891304.000000, 0.000000
[Sat Jun 22 04:11:02 2013] Background scale factor is not positive, halting re-assessment of this source
[Sat Jun 22 04:11:13 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 22 04:11:13 2013] Using photon index=1.80, rate=0.00967, arf fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src13.arf
[Sat Jun 22 04:11:13 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 22 04:11:13 2013] Updating source flux to 4.7e-13
[Sat Jun 22 04:11:51 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 22 04:13:00 2013] xmm0110010701/analysis//spectral/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src13_pl.csv not found, spectral fit skipped or did not complete