[Sat Jun 22 00:45:51 2013] Detection parameters:
  Position = (276.3, 313.2) = 14 43 13.67 -62 38 9.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 85.9 +/- 15.9
  Background counts = 50.1
  Rate = 0.006 +/- 0.001

[Sat Jun 22 00:45:52 2013] Off-axis axis estimate = 1.93'
[Sat Jun 22 00:47:53 2013] Using EEF radius (= 7.39 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 00:47:53 2013] Initial guess for spatial extent in simple fitting = 7.39"
[Sat Jun 22 00:47:53 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.827
[Sat Jun 22 00:47:53 2013] Giving source the simple spatial ID 85 for pass 0, mean size = 7.39"
[Sat Jun 22 00:47:57 2013] fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_src85.ximg exists
[Sat Jun 22 00:47:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_src85.csv
[Sat Jun 22 00:47:57 2013] fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_src85_1.ximg exists
[Sat Jun 22 00:47:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_src85.csv
[Sat Jun 22 00:47:57 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_src85_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_src85.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:48:02 2013] fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src85.ximg exists
[Sat Jun 22 00:48:02 2013] fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src85_1.ximg exists
[Sat Jun 22 00:48:02 2013] Fit fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src85 appears to have run properly
[Sat Jun 22 00:49:21 2013] Warning, spatial fit 85 centroid is now closest to src. 109
[Sat Jun 22 00:49:21 2013] Source 113 is offset by -1.808893 and -8.039599 pixels which is larger than
2 X fitted extent = 1.325499 x 1.325499, not incorporating fit results
[Sat Jun 22 00:49:21 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 00:49:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 00:49:21 2013] Assessing source extent using major
[Sat Jun 22 00:49:21 2013] Source does appear to be extended
[Sat Jun 22 00:49:21 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 00:50:44 2013] Using EEF radius (= 7.39 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 00:50:44 2013] Initial guess for spatial extent in simple fitting = 7.39"
[Sat Jun 22 00:50:44 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.827
[Sat Jun 22 00:50:44 2013] Giving source the simple spatial ID 82 for pass 1, mean size = 7.39"
[Sat Jun 22 00:50:47 2013] fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_src82.ximg exists
[Sat Jun 22 00:50:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_src82.csv
[Sat Jun 22 00:50:47 2013] fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_src82_1.ximg exists
[Sat Jun 22 00:50:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_src82.csv
[Sat Jun 22 00:50:47 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_src82_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_src82.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:50:55 2013] fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src82.ximg exists
[Sat Jun 22 00:50:55 2013] fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src82_1.ximg exists
[Sat Jun 22 00:50:55 2013] Fit fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src82 appears to have run properly
[Sat Jun 22 00:52:03 2013] Warning: source 66 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 113 at 14.649004 pixels away
[Sat Jun 22 00:52:03 2013] Warning, spatial fit 82 centroid is now closest to src. 104
[Sat Jun 22 00:52:03 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 00:52:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 00:52:03 2013] Assessing source extent using major
[Sat Jun 22 00:52:03 2013] Source does appear to be extended
[Sat Jun 22 00:52:03 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 00:52:03 2013] Source is confused with source 103
[Sat Jun 22 04:08:23 2013] XMMSAS src. selection expression = ellipse(23985.632324, 27199.932922, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 22 04:08:23 2013] Not overwriting source region fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src113_src.reg
[Sat Jun 22 04:08:23 2013] Extracting stamp from image fullrun_mos1_xmm0110010701_pi300-10000_cl_sm2.00.img.gz, (239, 276) - (314, 351)
[Sat Jun 22 04:08:23 2013] XMMSAS bgd. selection expression = annulus(23985.632324, 27199.932922, 1087.500000, 2175.000000, X, Y) && !ellipse(22002.786000, 27410.083000, 1276.232037, 1276.232037, 0.000000, X, Y) && !ellipse(25203.194244, 25957.142914, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22421.105865, 27176.531494, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24705.315400, 25989.039400, 858.184025, 858.184025, 0.000000, X, Y) && !ellipse(23696.500600, 28077.375000, 2142.224062, 2142.224062, 0.000000, X, Y) && !ellipse(22733.936000, 28829.546400, 1289.384037, 1289.384037, 0.000000, X, Y) && !ellipse(24712.536865, 26213.491302, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22572.134552, 27694.041840, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25912.628693, 26212.782410, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24746.720367, 28323.034210, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26980.462891, 27269.813293, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 22 04:08:23 2013] Writing fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src113.gif
[Sat Jun 22 04:08:27 2013] ../../xmm0110010701/products/events/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src113_src.evt and ../../xmm0110010701/products/events/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src113_bgd.evt exist, delete to re-create
[Sat Jun 22 04:08:27 2013] Mean detx,y = (461.98, -2764.75) 
[Sat Jun 22 04:08:27 2013] ../../xmm0110010701/products/images/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src113_src.img and ../../xmm0110010701/products/images/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src113_bgd.img exist, delete to re-create
[Sat Jun 22 04:08:27 2013] ../../xmm0110010701/products/spectra/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src113_src_b10.pi.gz and ../../xmm0110010701/products/spectra/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src113_bgd.pi exist, delete to re-create
[Sat Jun 22 04:08:27 2013] Setting source spectrum file to fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src113_src_b10.pi.gz
[Sat Jun 22 04:08:27 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src113_bgd.pi.gz
[Sat Jun 22 04:08:27 2013] ../../xmm0110010701/products/lightcurves/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src113_src.lc and ../../xmm0110010701/products/lightcurves/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src113_bgd.lc exist, delete to re-create
[Sat Jun 22 04:08:49 2013] Not generating rmf since there are only 85 counts
[Sat Jun 22 04:08:49 2013] rmf not generated due to insufficient counts
[Sat Jun 22 04:08:49 2013] fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src113.arf exists, delete to re-create
[Sat Jun 22 04:11:07 2013] Updating aperture counts using extracted products
[Sat Jun 22 04:11:07 2013] Total counts from fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src113_src_b10.pi.gz = 645.00
[Sat Jun 22 04:11:07 2013] Total counts from fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src113_bgd.pi.gz = 516.00
[Sat Jun 22 04:11:08 2013] Got source and background scale factors 1329600.000000, 1819980.000000
[Sat Jun 22 04:11:08 2013] User source parameters:
  Position = (276.3, 313.2) = 14 43 13.67 -62 38 9.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 268.0 +/- 26.4
  Background aperture counts = 377.0
  Rate = 0.02 +/- 0.002

[Sat Jun 22 04:11:08 2013] Updating counts from extracted products
[Sat Jun 22 04:11:08 2013] Set source signif. to 268.03/19.42 = 13.80
[Sat Jun 22 04:11:14 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 22 04:11:14 2013] Using photon index=1.80, rate=0.0155, arf fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src113.arf
[Sat Jun 22 04:11:14 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 22 04:11:14 2013] Updating source flux to 2.4e-13
[Sat Jun 22 04:11:51 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 22 04:13:00 2013] xmm0110010701/analysis//spectral/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src113_pl.csv not found, spectral fit skipped or did not complete