[Sat Jun 22 00:45:50 2013] Detection parameters:
  Position = (326.4, 319.1) = 14 42 42.02 -62 37 43.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 90.1 +/- 15.6
  Background counts = 41.5
  Rate = 0.005 +/- 0.0009

[Sat Jun 22 00:45:52 2013] Off-axis axis estimate = 2.52'
[Sat Jun 22 00:47:53 2013] Using EEF radius (= 7.69 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 00:47:53 2013] Initial guess for spatial extent in simple fitting = 7.69"
[Sat Jun 22 00:47:53 2013] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.972
[Sat Jun 22 00:47:53 2013] Giving source the simple spatial ID 89 for pass 0, mean size = 7.69"
[Sat Jun 22 00:47:57 2013] fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_src89.ximg exists
[Sat Jun 22 00:47:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_src89.csv
[Sat Jun 22 00:47:57 2013] fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_src89_1.ximg exists
[Sat Jun 22 00:47:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_src89.csv
[Sat Jun 22 00:47:57 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_src89_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_src89.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:48:02 2013] fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src89.ximg exists
[Sat Jun 22 00:48:02 2013] fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src89_1.ximg exists
[Sat Jun 22 00:48:02 2013] Fit fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src89 appears to have run properly
[Sat Jun 22 00:49:21 2013] Spatial fit model total counts = 809.147000, observed total counts = 810.000000
[Sat Jun 22 00:49:21 2013] Offset between fit and detection position for source 110 = 1.543773 pixels
[Sat Jun 22 00:49:21 2013] 793.607000 total counts/ 677.876000 bgd. counts: snr = 4.445029
Spatial fit parameters:
  Offset between fit and detection position for source 110 = 1.543773 pixels
  Position = (325.2, 320.0) = 14 42 42.82 -62 37 40.1
  Extent = 15.4 (15.3-30.8)", rotation angle = 0
  Source counts = 115.7 +/- 28.2
  Background counts = 677.9
  Rate = 0.007 +/- 0.002
[Sat Jun 22 00:49:21 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 00:49:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 00:49:21 2013] Assessing source extent using major axis lower bound
[Sat Jun 22 00:49:21 2013] Source does appear to be extended
[Sat Jun 22 00:49:21 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 00:49:21 2013] Source is confused with source 102
[Sat Jun 22 00:49:21 2013] Source is confused with source 107
[Sat Jun 22 00:50:44 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 22 00:50:44 2013] Initial guess for spatial extent in simple fitting = 15.38"
[Sat Jun 22 00:50:44 2013] source mask rpix=3.5, npix_max = 65, mask sum = 64, frac = 0.982
[Sat Jun 22 00:50:44 2013] Giving source the simple spatial ID 86 for pass 1, mean size = 15.38"
[Sat Jun 22 00:50:48 2013] fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_src86.ximg exists
[Sat Jun 22 00:50:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_src86.csv
[Sat Jun 22 00:50:48 2013] fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_src86_1.ximg exists
[Sat Jun 22 00:50:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_src86.csv
[Sat Jun 22 00:50:48 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_src86_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_src86.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:50:55 2013] fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src86.ximg exists
[Sat Jun 22 00:50:55 2013] fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src86_1.ximg exists
[Sat Jun 22 00:50:55 2013] Fit fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src86 appears to have run properly
[Sat Jun 22 00:52:03 2013] Warning, spatial fit 86 centroid is now closest to src. 107
[Sat Jun 22 00:52:03 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 00:52:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 00:52:03 2013] Assessing source extent using major axis lower bound
[Sat Jun 22 00:52:03 2013] Source does appear to be extended
[Sat Jun 22 00:52:03 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 04:08:23 2013] XMMSAS src. selection expression = ellipse(28241.088400, 27790.698450, 922.782027, 922.782027, 0.000000, X, Y)
[Sat Jun 22 04:08:23 2013] Not overwriting source region fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src110_src.reg
[Sat Jun 22 04:08:23 2013] Extracting stamp from image fullrun_mos1_xmm0110010701_pi300-10000_cl_sm2.00.img.gz, (272, 267) - (378, 373)
[Sat Jun 22 04:08:23 2013] XMMSAS bgd. selection expression = annulus(28241.088400, 27790.698450, 1537.970044, 3075.940089, X, Y) && !ellipse(33169.106000, 21569.826000, 3162.064091, 3162.064091, 0.000000, X, Y) && !ellipse(25203.194244, 25957.142914, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24705.315400, 25989.039400, 858.184025, 858.184025, 0.000000, X, Y) && !ellipse(23696.500600, 28077.375000, 2142.224062, 2142.224062, 0.000000, X, Y) && !ellipse(24712.536865, 26213.491302, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25912.628693, 26212.782410, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24746.720367, 28323.034210, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26980.462891, 27269.813293, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27748.005310, 27787.467010, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 22 04:08:23 2013] Writing fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src110.gif
[Sat Jun 22 04:08:27 2013] ../../xmm0110010701/products/events/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src110_src.evt and ../../xmm0110010701/products/events/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src110_bgd.evt exist, delete to re-create
[Sat Jun 22 04:08:27 2013] Mean detx,y = (-497.28, 1375.87) 
[Sat Jun 22 04:08:27 2013] ../../xmm0110010701/products/images/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src110_src.img and ../../xmm0110010701/products/images/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src110_bgd.img exist, delete to re-create
[Sat Jun 22 04:08:27 2013] ../../xmm0110010701/products/spectra/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src110_src_b10.pi.gz and ../../xmm0110010701/products/spectra/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src110_bgd.pi exist, delete to re-create
[Sat Jun 22 04:08:27 2013] Setting source spectrum file to fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src110_src_b10.pi.gz
[Sat Jun 22 04:08:27 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src110_bgd.pi.gz
[Sat Jun 22 04:08:27 2013] ../../xmm0110010701/products/lightcurves/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src110_src.lc and ../../xmm0110010701/products/lightcurves/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src110_bgd.lc exist, delete to re-create
[Sat Jun 22 04:08:49 2013] fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src110.rmf exists, delete to re-create
[Sat Jun 22 04:08:49 2013] fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src110.arf exists, delete to re-create
[Sat Jun 22 04:11:08 2013] Updating aperture counts using extracted products
[Sat Jun 22 04:11:08 2013] Total counts from fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src110_src_b10.pi.gz = 1108.00
[Sat Jun 22 04:11:09 2013] Total counts from fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src110_bgd.pi.gz = 5242.00
[Sat Jun 22 04:11:09 2013] Got source and background scale factors 2680000.000000, 18350064.000000
[Sat Jun 22 04:11:09 2013] User source parameters:
  Position = (325.2, 320.0) = 14 42 42.82 -62 37 40.1
  Extent = 15.4 (15.3-30.8)", rotation angle = 0
  Source aperture counts = 342.4 +/- 34.3
  Background aperture counts = 765.6
  Rate = 0.02 +/- 0.002

[Sat Jun 22 04:11:15 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 22 04:11:15 2013] Using photon index=1.80, rate=0.00667, arf fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src110.arf
[Sat Jun 22 04:11:15 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 22 04:11:15 2013] Updating source flux to 9.3e-14
[Sat Jun 22 04:11:51 2013] Flag c found in src. 110 procflags, skipping spectral fitting
[Sat Jun 22 04:13:00 2013] xmm0110010701/analysis//spectral/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src110_pl.csv not found, spectral fit skipped or did not complete