[Sat Jun 22 00:45:40 2013] Detection parameters:
  Position = (483.0, 242.2) = 14 41 2.90 -62 43 16.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2732.6 +/- 64.9
  Background counts = 95.1
  Rate = 0.2 +/- 0.004

[Sat Jun 22 00:45:52 2013] Off-axis axis estimate = 13.99'
[Sat Jun 22 00:47:53 2013] Using EEF radius (= 13.42 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 00:47:53 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun 22 00:47:53 2013] Initial guess for spatial extent in simple fitting = 13.42"
[Sat Jun 22 00:47:53 2013] source mask rpix=3.1, npix_max = 51, mask sum = 52, frac = 1.011
[Sat Jun 22 00:47:53 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 13.42"
[Sat Jun 22 00:47:54 2013] fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_src1.ximg exists
[Sat Jun 22 00:47:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_src1.csv
[Sat Jun 22 00:47:54 2013] fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Jun 22 00:47:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_src1.csv
[Sat Jun 22 00:47:54 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:47:57 2013] fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Jun 22 00:47:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sat Jun 22 00:47:57 2013] fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Jun 22 00:47:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sat Jun 22 00:47:57 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110010701_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:49:20 2013] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 12.286574 pixels away
[Sat Jun 22 00:49:20 2013] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 10.108799 pixels away
[Sat Jun 22 00:49:21 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 00:49:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 00:49:21 2013] Assessing source extent using major
[Sat Jun 22 00:49:21 2013] Source does appear to be extended
[Sat Jun 22 00:49:21 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 00:49:21 2013] Source is confused with source 3
[Sat Jun 22 00:50:44 2013] Using EEF radius (= 13.42 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 00:50:44 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun 22 00:50:44 2013] Initial guess for spatial extent in simple fitting = 13.42"
[Sat Jun 22 00:50:44 2013] source mask rpix=3.1, npix_max = 51, mask sum = 52, frac = 1.011
[Sat Jun 22 00:50:44 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 13.42"
[Sat Jun 22 00:50:45 2013] fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_src1.ximg exists
[Sat Jun 22 00:50:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_src1.csv
[Sat Jun 22 00:50:45 2013] fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Jun 22 00:50:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_src1.csv
[Sat Jun 22 00:50:45 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:50:48 2013] fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Jun 22 00:50:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sat Jun 22 00:50:48 2013] fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Jun 22 00:50:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sat Jun 22 00:50:48 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110010701_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 00:52:03 2013] Warning, spatial fit 1 centroid is now closest to src. 59
[Sat Jun 22 00:52:03 2013] Spatial fit model total counts = 3981.500000, observed total counts = 4196.000000
[Sat Jun 22 00:52:03 2013] Offset between fit and detection position for source 1 = 8.292156 pixels
[Sat Jun 22 00:52:03 2013] Warning, changing simple spatial fit ID from 1 to 10
[Sat Jun 22 00:52:03 2013] 4255.208550 total counts/ 7.268550 bgd. counts: snr = 1575.630877
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 8.292156 pixels
  Position = (480.4, 250.0) = 14 41 4.58 -62 42 41.5
  Extent = 27.1" x 25.8", rotation angle = 12
  Source counts = 4247.9 +/- 65.2
  Background counts = 7.3
  Rate = 0.2 +/- 0.004
[Sat Jun 22 00:52:03 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 00:52:03 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 00:52:03 2013] Assessing source extent using major
[Sat Jun 22 00:52:03 2013] Source does appear to be extended
[Sat Jun 22 00:52:03 2013] Computing asymmetry using major and minor axis, asym = 1.05
[Sat Jun 22 04:08:15 2013] Counts = 4247.940000, rescaling region sizes by 2.000000
[Sat Jun 22 04:08:15 2013] XMMSAS src. selection expression = ellipse(41746.289015, 21705.269038, 3253.932094, 3100.827530, 11.607784, X, Y)
[Sat Jun 22 04:08:15 2013] Not overwriting source region fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src1_src.reg
[Sat Jun 22 04:08:15 2013] Extracting stamp from image fullrun_mos1_xmm0110010701_pi300-10000_cl_sm2.00.img.gz, (293, 63) - (595, 437)
[Sat Jun 22 04:08:15 2013] XMMSAS bgd. selection expression = annulus(41746.289015, 21705.269038, 10846.440312, 21692.880624, X, Y) && !ellipse(30847.222000, 19222.016000, 1538.960044, 1538.960044, 0.000000, X, Y) && !ellipse(40306.918000, 20649.130000, 772.384822, 772.384822, 0.000000, X, Y) && !ellipse(32690.250000, 21958.320000, 1508.552043, 1508.552043, 0.000000, X, Y) && !ellipse(30571.036000, 19328.262000, 776.967222, 776.967222, 0.000000, X, Y) && !ellipse(32354.626000, 17823.294000, 1717.472049, 1717.472049, 0.000000, X, Y) && !ellipse(38406.146000, 20073.986000, 806.104023, 806.104023, 0.000000, X, Y) && !ellipse(33936.439400, 22829.421800, 972.696028, 972.696028, 0.000000, X, Y) && !ellipse(35202.188568, 21869.227493, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40885.606000, 21367.210000, 1544.768044, 1544.768044, 0.000000, X, Y) && !ellipse(35639.872803, 21161.780334, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30484.135132, 19772.220306, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37971.872000, 19898.323800, 1750.176050, 995.160029, 334.893000, X, Y) && !ellipse(31580.627716, 19867.420364, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36305.310000, 21342.568000, 1806.560052, 1806.560052, 0.000000, X, Y) && !ellipse(29494.038000, 20359.038000, 1046.792030, 1046.792030, 0.000000, X, Y) && !ellipse(33556.422000, 17785.638000, 1793.656052, 1793.656052, 0.000000, X, Y) && !ellipse(29318.686000, 20474.428000, 1497.520043, 1497.520043, 0.000000, X, Y) && !ellipse(34555.087000, 23592.116000, 1626.840047, 1626.840047, 0.000000, X, Y) && !ellipse(32599.328000, 17817.013000, 1494.416043, 1494.416043, 0.000000, X, Y) && !ellipse(38086.800000, 22725.680000, 1853.256053, 1853.256053, 0.000000, X, Y) && !ellipse(37751.032623, 22317.788055, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37388.612000, 22329.896000, 1858.408053, 1858.408053, 0.000000, X, Y) && !ellipse(35020.878000, 20884.520000, 1717.832049, 1717.832049, 0.000000, X, Y) && !ellipse(33297.691600, 23608.977200, 781.187222, 781.187222, 0.000000, X, Y) && !ellipse(35322.676453, 29433.882538, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34101.296600, 17872.038406, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35796.248718, 23434.246460, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32038.966000, 20414.350000, 1581.032045, 1581.032045, 0.000000, X, Y) && !ellipse(36426.073600, 21994.006000, 1524.464044, 1524.464044, 0.000000, X, Y) && !ellipse(28958.726000, 21190.770000, 1605.632046, 1605.632046, 0.000000, X, Y) && !ellipse(30263.887177, 20983.339798, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33169.106000, 21569.826000, 3162.064091, 3162.064091, 0.000000, X, Y) && !ellipse(31834.084778, 21595.467422, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35147.502960, 19404.384600, 1072.800031, 1072.800031, 0.000000, X, Y) && !ellipse(30521.146000, 21363.608000, 1460.144042, 1460.144042, 0.000000, X, Y) && !ellipse(37049.586000, 21470.872000, 1853.256053, 1853.256053, 0.000000, X, Y) && !ellipse(33714.670000, 20559.536000, 1620.656047, 1620.656047, 0.000000, X, Y) && !ellipse(28477.060000, 21361.838000, 2930.984084, 2930.984084, 0.000000, X, Y) && !ellipse(26087.573883, 19604.557861, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36002.109070, 22563.888031, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32926.560303, 23359.220642, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31689.906000, 18188.618000, 1590.488046, 1409.672041, 249.181000, X, Y) && !ellipse(29804.421082, 19007.432480, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39639.382000, 24169.682000, 1969.624057, 1072.016031, 309.447000, X, Y) && !ellipse(29425.046000, 21070.656000, 1438.648041, 1438.648041, 0.000000, X, Y) && !ellipse(32459.147705, 23339.127380, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38288.880000, 23223.196000, 1922.448055, 1922.448055, 0.000000, X, Y) && !ellipse(30096.997345, 21404.236282, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33051.646698, 21012.742920, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24557.528000, 20849.516000, 1764.296051, 1764.296051, 0.000000, X, Y) && !ellipse(29885.147000, 23232.180200, 1201.584035, 552.624816, 354.275000, X, Y) && !ellipse(43083.361603, 24220.862610, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31171.830080, 22915.906200, 1433.112041, 602.178417, 342.720600, X, Y) && !ellipse(31211.240000, 21323.550000, 1517.072044, 1517.072044, 0.000000, X, Y) && !ellipse(39308.860000, 37696.705200, 2214.160064, 2214.160064, 0.000000, X, Y) && !ellipse(23608.448000, 21154.230800, 1385.280040, 1385.280040, 0.000000, X, Y) && !ellipse(38746.446000, 23068.156000, 3716.816107, 3716.816107, 0.000000, X, Y) && !ellipse(23950.868600, 21044.874000, 1361.752039, 1361.752039, 0.000000, X, Y) && !ellipse(22002.786000, 27410.083000, 1276.232037, 1276.232037, 0.000000, X, Y) && !ellipse(25203.194244, 25957.142914, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29311.598000, 18486.156000, 1557.072045, 1557.072045, 0.000000, X, Y) && !ellipse(39230.967194, 19472.180756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40425.940125, 36230.919495, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36135.043732, 19608.426239, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22421.105865, 27176.531494, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35267.158000, 19460.618000, 1645.024047, 1645.024047, 0.000000, X, Y) && !ellipse(24705.315400, 25989.039400, 858.184025, 858.184025, 0.000000, X, Y) && !ellipse(39963.877411, 37532.741425, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40361.964000, 24874.364000, 3295.024095, 3295.024095, 0.000000, X, Y) && !ellipse(43318.695435, 25712.391693, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23696.500600, 28077.375000, 2142.224062, 2142.224062, 0.000000, X, Y) && !ellipse(27057.098000, 19320.660000, 1470.320042, 1470.320042, 0.000000, X, Y) && !ellipse(37718.734192, 38153.901459, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39645.742600, 24214.998000, 1952.280056, 1952.280056, 0.000000, X, Y) && !ellipse(23985.632324, 27199.932922, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22733.936000, 28829.546400, 1289.384037, 1289.384037, 0.000000, X, Y) && !ellipse(24712.536865, 26213.491302, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22572.134552, 27694.041840, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28241.088400, 27790.698450, 1230.376035, 1230.376035, 0.000000, X, Y) && !ellipse(25912.628693, 26212.782410, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24746.720367, 28323.034210, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26980.462891, 27269.813293, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23343.206000, 21477.058000, 2723.504078, 2723.504078, 0.000000, X, Y) && !ellipse(27748.005310, 27787.467010, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 22 04:08:15 2013] Writing fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src1.gif
[Sat Jun 22 04:08:24 2013] ../../xmm0110010701/products/events/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src1_src.evt and ../../xmm0110010701/products/events/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src1_bgd.evt exist, delete to re-create
[Sat Jun 22 04:08:24 2013] Mean detx,y = (-10502.39, 11265.67) 
[Sat Jun 22 04:08:24 2013] ../../xmm0110010701/products/images/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src1_src.img and ../../xmm0110010701/products/images/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src1_bgd.img exist, delete to re-create
[Sat Jun 22 04:08:24 2013] ../../xmm0110010701/products/spectra/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src1_src_b10.pi.gz and ../../xmm0110010701/products/spectra/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src1_bgd.pi exist, delete to re-create
[Sat Jun 22 04:08:24 2013] Setting source spectrum file to fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jun 22 04:08:24 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Jun 22 04:08:24 2013] ../../xmm0110010701/products/lightcurves/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src1_src.lc and ../../xmm0110010701/products/lightcurves/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src1_bgd.lc exist, delete to re-create
[Sat Jun 22 04:08:49 2013] fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src1.rmf exists, delete to re-create
[Sat Jun 22 04:08:49 2013] fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src1.arf exists, delete to re-create
[Sat Jun 22 04:10:49 2013] Updating aperture counts using extracted products
[Sat Jun 22 04:10:49 2013] Total counts from fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 27866.00
[Sat Jun 22 04:10:49 2013] Total counts from fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src1_bgd.pi.gz = 31990.00
[Sat Jun 22 04:10:49 2013] Got source and background scale factors 18606950.000000, 257205346.000000
[Sat Jun 22 04:10:49 2013] User source parameters:
  Position = (480.4, 250.0) = 14 41 4.58 -62 42 41.5
  Extent = 27.1" x 25.8", rotation angle = 12
  Source aperture counts = 25551.8 +/- 167.9
  Background aperture counts = 2314.2
  Rate = 1 +/- 0.01

[Sat Jun 22 04:11:10 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 22 04:11:10 2013] Using photon index=1.80, rate=0.245, arf fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src1.arf
[Sat Jun 22 04:11:10 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 22 04:11:10 2013] Updating source flux to 7.9e-12
[Sat Jun 22 04:11:51 2013] Flag c found in src. 1 procflags, skipping spectral fitting
[Sat Jun 22 04:13:00 2013] xmm0110010701/analysis//spectral/fullrun_mos1_xmm0110010701_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete