[Wed Aug 22 21:20:54 2012] Detection parameters:
  Position = (337.9, 301.0) = 23 23 11.46 58 48 46.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 24184.9 +/- 198.6
  Background counts = 148.8
  Rate = 1 +/- 0.01

[Wed Aug 22 21:20:56 2012] Off-axis axis estimate = 2.87'
[Wed Aug 22 21:31:58 2012] Using EEF radius (= 7.86 ")to estimate initial spatial extent for simple fitting
[Wed Aug 22 21:31:58 2012] Initial guess for spatial extent in simple fitting = 7.86"
[Wed Aug 22 21:31:58 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.751
[Wed Aug 22 21:31:58 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 7.86"
[Sat Aug 25 05:48:22 2012] fullrun_pn_xmm0110010301_pi300-10000_cl_pass0_src10.ximg exists
[Sat Aug 25 05:48:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110010301_pi300-10000_cl_pass0_src10.csv
[Sat Aug 25 05:48:22 2012] fullrun_pn_xmm0110010301_pi300-10000_cl_pass0_src10_1.ximg exists
[Sat Aug 25 05:48:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110010301_pi300-10000_cl_pass0_src10.csv
[Sat Aug 25 05:48:22 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110010301_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110010301_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 25 05:48:25 2012] fullrun_pn_xmm0110010301_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Sat Aug 25 05:48:25 2012] fullrun_pn_xmm0110010301_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Sat Aug 25 05:48:25 2012] Fit fullrun_pn_xmm0110010301_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Sat Aug 25 15:42:00 2012] Spatial fit model total counts = 102477.000000, observed total counts = 103453.000000
[Sat Aug 25 15:42:00 2012] Offset between fit and detection position for source 10 = 3.319034 pixels
[Sat Aug 25 15:42:00 2012] Warning, changing simple spatial fit ID from 10 to 7
[Sat Aug 25 15:42:00 2012] 95743.800000 total counts/ 25600.000000 bgd. counts: snr = 438.398750
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 3.319034 pixels
  Position = (337.5, 297.7) = 23 23 11.70 58 48 32.0
  Extent = 15.6 (15.6-31.2)", rotation angle = 0
  Source counts = 70143.8 +/- 309.4
  Background counts = 25600.0
  Rate = 5 +/- 0.02
[Sat Aug 25 15:42:01 2012] Vigneting correction estimate = 1.000000
[Sat Aug 25 15:42:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 25 15:42:01 2012] Assessing source extent using major axis lower bound
[Sat Aug 25 15:42:01 2012] Source does appear to be extended
[Sat Aug 25 15:42:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 25 15:42:01 2012] Source is confused with source 7
[Sat Aug 25 15:42:24 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Aug 25 15:42:24 2012] Initial guess for spatial extent in simple fitting = 15.59"
[Sat Aug 25 15:42:24 2012] source mask rpix=3.6, npix_max = 66, mask sum = 72, frac = 1.079
[Sat Aug 25 15:42:24 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 15.59"
[Mon Aug 27 23:39:06 2012] fullrun_pn_xmm0110010301_pi300-10000_cl_pass1_src10.ximg exists
[Mon Aug 27 23:39:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110010301_pi300-10000_cl_pass1_src10.csv
[Mon Aug 27 23:39:06 2012] fullrun_pn_xmm0110010301_pi300-10000_cl_pass1_src10_1.ximg exists
[Mon Aug 27 23:39:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110010301_pi300-10000_cl_pass1_src10.csv
[Mon Aug 27 23:39:06 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110010301_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110010301_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 27 23:39:07 2012] fullrun_pn_xmm0110010301_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Mon Aug 27 23:39:07 2012] fullrun_pn_xmm0110010301_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Mon Aug 27 23:39:07 2012] Fit fullrun_pn_xmm0110010301_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Tue Aug 28 07:43:11 2012] Warning, spatial fit 10 centroid is now closest to src. 22
[Tue Aug 28 07:43:11 2012] Vigneting correction estimate = 1.000000
[Tue Aug 28 07:43:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 28 07:43:11 2012] Assessing source extent using major axis lower bound
[Tue Aug 28 07:43:11 2012] Source does appear to be extended
[Tue Aug 28 07:43:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 28 07:43:24 2012] Counts = 70143.800000, rescaling region sizes by 3.000000
[Tue Aug 28 07:43:24 2012] XMMSAS src. selection expression = ellipse(29315.949400, 25850.432000, 2806.902081, 2806.902081, 0.000000, X, Y)
[Tue Aug 28 07:43:24 2012] Writing source region out to fullrun_pn_xmm0110010301_pi300-10000_pass1_cl_src10_src.reg
[Tue Aug 28 07:43:24 2012] Extracting stamp from image fullrun_pn_xmm0110010301_pi300-10000_cl_sm2.00.img.gz, (176, 136) - (499, 459)
[Tue Aug 28 07:43:24 2012] XMMSAS bgd. selection expression = annulus(29315.949400, 25850.432000, 14034.510404, 28069.020808, X, Y) && !ellipse(25280.078000, 25349.782000, 6566.736189, 6566.736189, 0.000000, X, Y) && !ellipse(26763.488800, 27985.231800, 3532.848102, 3532.848102, 0.000000, X, Y) && !ellipse(25636.261383, 27696.330475, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(24464.935000, 26424.453400, 3385.824097, 3385.824097, 18.467000, X, Y) && !ellipse(25586.906000, 25129.399000, 3283.368094, 3283.368094, 0.000000, X, Y) && !ellipse(27466.261566, 27924.617859, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(29527.198800, 26147.782200, 3773.016109, 3773.016109, 0.000000, X, Y) && !ellipse(28380.240000, 27407.154000, 3574.440103, 3574.440103, 0.000000, X, Y) && !ellipse(28823.348000, 26995.774000, 7148.880206, 7148.880206, 0.000000, X, Y) && !ellipse(27611.350952, 28655.911163, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(23287.587952, 29791.560120, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24200.012665, 29191.191620, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26914.870392, 28740.391541, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(28841.010000, 27996.154000, 3809.640110, 3809.640110, 0.000000, X, Y) && !ellipse(23180.489380, 28057.287018, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(31030.542816, 28148.184601, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24847.627200, 27607.166400, 3516.576101, 1650.818448, 21.446000, X, Y) && !ellipse(31115.665710, 27238.890167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32433.879791, 27101.341064, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30894.222992, 26295.223724, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23160.072205, 27544.149506, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26818.388000, 26833.250000, 7451.712214, 7451.712214, 0.000000, X, Y) && !ellipse(27221.562000, 25297.630200, 3333.528096, 3333.528096, 254.246000, X, Y) && !ellipse(22851.536560, 25978.255707, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28487.640000, 24601.257000, 7274.832209, 7274.832209, 0.000000, X, Y) && !ellipse(30649.025726, 24913.642059, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28125.224000, 23304.764200, 573.564817, 573.564817, 0.000000, X, Y) && !ellipse(22426.530090, 24589.380676, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27421.712000, 23902.878000, 2695.488078, 2695.488078, 0.000000, X, Y) && !ellipse(24312.657593, 25800.153687, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(31328.981384, 30557.504211, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31965.644135, 28054.116913, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21715.554398, 24062.471527, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27110.880585, 31349.873810, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28912.392303, 32037.547638, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31382.570496, 30137.563538, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20737.218582, 25883.030426, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23289.629669, 21706.099838, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28074.547363, 32043.925018, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32673.526000, 29506.658000, 1572.416045, 1572.416045, 0.000000, X, Y)
[Tue Aug 28 07:43:24 2012] Writing fullrun_pn_xmm0110010301_pi300-10000_pass1_cl_src10.gif
[Tue Aug 28 08:54:06 2012] Mean detx,y = (1256.10, 529.65) 
[Tue Aug 28 08:54:13 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 28 09:01:53 2012] grppha failed
[Tue Aug 28 09:01:53 2012] Setting source spectrum file to fullrun_pn_xmm0110010301_pi300-10000_pass1_cl_src10_src.pi.gz
[Tue Aug 28 09:01:53 2012] Setting bgd. spectrum file to fullrun_pn_xmm0110010301_pi300-10000_pass1_cl_src10_bgd.pi.gz