[Sun Jul 22 10:57:33 2012] Detection parameters: Position = (382.6, 302.0) = 23 22 48.16 58 46 48.9 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 101.0 +/- 22.1 Background counts = 197.4 Rate = 0.005 +/- 0.001 [Sun Jul 22 10:57:33 2012] Off-axis axis estimate = 6.10' [Sun Jul 22 11:14:30 2012] Using EEF radius (= 9.48 ")to estimate initial spatial extent for simple fitting [Sun Jul 22 11:14:30 2012] Initial guess for spatial extent in simple fitting = 9.48" [Sun Jul 22 11:14:30 2012] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.045 [Sun Jul 22 11:14:30 2012] Giving source the simple spatial ID 48 for pass 0, mean size = 9.48" [Tue Jul 24 13:31:22 2012] fullrun_pn_xmm0110010201_pi300-10000_cl_pass0_src48.ximg exists [Tue Jul 24 13:31:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110010201_pi300-10000_cl_pass0_src48.csv [Tue Jul 24 13:31:22 2012] fullrun_pn_xmm0110010201_pi300-10000_cl_pass0_src48_1.ximg exists [Tue Jul 24 13:31:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110010201_pi300-10000_cl_pass0_src48.csv [Tue Jul 24 13:31:22 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0110010201_pi300-10000_cl_pass0_src48_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0110010201_pi300-10000_cl_pass0_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue Jul 24 13:31:24 2012] fullrun_pn_xmm0110010201_pi300-10000_cl_pass0_tfrozen_src48.ximg exists [Tue Jul 24 13:31:24 2012] fullrun_pn_xmm0110010201_pi300-10000_cl_pass0_tfrozen_src48_1.ximg exists [Tue Jul 24 13:31:24 2012] Fit fullrun_pn_xmm0110010201_pi300-10000_cl_pass0_tfrozen_src48 appears to have run properly [Wed Jul 25 18:22:24 2012] Spatial fit model total counts = 2423.560000, observed total counts = 2424.000000 [Wed Jul 25 18:22:24 2012] Offset between fit and detection position for source 51 = 0.134229 pixels [Wed Jul 25 18:22:24 2012] 2341.531200 total counts/ 2307.180000 bgd. counts: snr = 0.715157 Spatial fit parameters: Offset between fit and detection position for source 51 = 0.134229 pixels Position = (382.7, 302.0) = 23 22 48.08 58 46 49.0 Extent = 3.5 (2.4-7.4)", rotation angle = 0 Source counts = 34.4 +/- 48.4 Background counts = 2307.2 Rate = 0.002 +/- 0.003 Deleting source due to low Poisson probability