[Sun Jul 22 10:57:32 2012] Detection parameters:
  Position = (243.2, 313.2) = 23 24 6.13 58 47 38.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 324.8 +/- 34.3
  Background counts = 321.4
  Rate = 0.03 +/- 0.003

[Sun Jul 22 10:57:33 2012] Off-axis axis estimate = 4.14'
[Sun Jul 22 11:14:30 2012] Using EEF radius (= 8.50 ")to estimate initial spatial extent for simple fitting
[Sun Jul 22 11:14:30 2012] Initial guess for spatial extent in simple fitting = 8.50"
[Sun Jul 22 11:14:30 2012] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.038
[Sun Jul 22 11:14:30 2012] Giving source the simple spatial ID 45 for pass 0, mean size = 8.50"
[Tue Jul 24 13:31:22 2012] fullrun_pn_xmm0110010201_pi300-10000_cl_pass0_src45.ximg exists
[Tue Jul 24 13:31:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110010201_pi300-10000_cl_pass0_src45.csv
[Tue Jul 24 13:31:22 2012] fullrun_pn_xmm0110010201_pi300-10000_cl_pass0_src45_1.ximg exists
[Tue Jul 24 13:31:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110010201_pi300-10000_cl_pass0_src45.csv
[Tue Jul 24 13:31:22 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110010201_pi300-10000_cl_pass0_src45_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110010201_pi300-10000_cl_pass0_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 24 13:31:24 2012] fullrun_pn_xmm0110010201_pi300-10000_cl_pass0_tfrozen_src45.ximg exists
[Tue Jul 24 13:31:24 2012] fullrun_pn_xmm0110010201_pi300-10000_cl_pass0_tfrozen_src45_1.ximg exists
[Tue Jul 24 13:31:24 2012] Fit fullrun_pn_xmm0110010201_pi300-10000_cl_pass0_tfrozen_src45 appears to have run properly
[Wed Jul 25 18:22:24 2012] Warning, spatial fit 45 centroid is now closest to src. 55
[Wed Jul 25 18:22:24 2012] Spatial fit model total counts = 4799.730000, observed total counts = 4804.000000
[Wed Jul 25 18:22:24 2012] Offset between fit and detection position for source 48 = 0.867959 pixels
[Wed Jul 25 18:22:24 2012] Warning, changing simple spatial fit ID from 45 to 49
[Wed Jul 25 18:22:24 2012] 4888.228100 total counts/ 4851.010000 bgd. counts: snr = 0.534365
Spatial fit parameters:
  Offset between fit and detection position for source 48 = 0.867959 pixels
  Position = (242.6, 312.5) = 23 24 6.47 58 47 35.2
  Extent = 2.2 (2.1-4.0)", rotation angle = 0
  Source counts = 37.2 +/- 69.9
  Background counts = 4851.0
  Rate = 0.002 +/- 0.004
  Deleting source due to low Poisson probability