[Sun Jul 22 10:57:30 2012] Detection parameters:
  Position = (310.3, 352.0) = 23 23 28.56 58 50 27.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 66345.1 +/- 314.3
  Background counts = 122.0
  Rate = 4 +/- 0.02

[Sun Jul 22 10:57:33 2012] Off-axis axis estimate = 3.97'
[Sun Jul 22 11:14:30 2012] Using EEF radius (= 8.42 ")to estimate initial spatial extent for simple fitting
[Sun Jul 22 11:14:30 2012] Initial guess for spatial extent in simple fitting = 8.42"
[Sun Jul 22 11:14:30 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.844
[Sun Jul 22 11:14:30 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 8.42"
[Tue Jul 24 13:31:22 2012] fullrun_pn_xmm0110010201_pi300-10000_cl_pass0_src13.ximg exists
[Tue Jul 24 13:31:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110010201_pi300-10000_cl_pass0_src13.csv
[Tue Jul 24 13:31:22 2012] fullrun_pn_xmm0110010201_pi300-10000_cl_pass0_src13_1.ximg exists
[Tue Jul 24 13:31:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110010201_pi300-10000_cl_pass0_src13.csv
[Tue Jul 24 13:31:22 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110010201_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110010201_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 24 13:31:23 2012] fullrun_pn_xmm0110010201_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Tue Jul 24 13:31:23 2012] fullrun_pn_xmm0110010201_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Tue Jul 24 13:31:23 2012] Fit fullrun_pn_xmm0110010201_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Wed Jul 25 18:22:24 2012] Spatial fit model total counts = 211880.000000, observed total counts = 218979.000000
[Wed Jul 25 18:22:24 2012] Offset between fit and detection position for source 13 = 1.641403 pixels
[Wed Jul 25 18:22:24 2012] 198731.000000 total counts/ 25600.000000 bgd. counts: snr = 1082.068750
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 1.641403 pixels
  Position = (311.9, 351.8) = 23 23 27.65 58 50 26.0
  Extent = 16.8 (16.8-33.7)", rotation angle = 0
  Source counts = 173131.0 +/- 445.8
  Background counts = 25600.0
  Rate = 9 +/- 0.02
[Wed Jul 25 18:22:24 2012] Vigneting correction estimate = 1.000000
[Wed Jul 25 18:22:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 25 18:22:24 2012] Assessing source extent using major axis lower bound
[Wed Jul 25 18:22:24 2012] Source does appear to be extended
[Wed Jul 25 18:22:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 25 18:22:24 2012] Source is confused with source 2
[Wed Jul 25 18:22:54 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jul 25 18:22:54 2012] Initial guess for spatial extent in simple fitting = 16.83"
[Wed Jul 25 18:22:54 2012] source mask rpix=3.9, npix_max = 76, mask sum = 72, frac = 0.943
[Wed Jul 25 18:22:54 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 16.83"
[Thu Jul 26 18:03:24 2012] fullrun_pn_xmm0110010201_pi300-10000_cl_pass1_src13.ximg exists
[Thu Jul 26 18:03:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110010201_pi300-10000_cl_pass1_src13.csv
[Thu Jul 26 18:03:24 2012] fullrun_pn_xmm0110010201_pi300-10000_cl_pass1_src13_1.ximg exists
[Thu Jul 26 18:03:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110010201_pi300-10000_cl_pass1_src13.csv
[Thu Jul 26 18:03:24 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110010201_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110010201_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 26 18:03:25 2012] fullrun_pn_xmm0110010201_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Thu Jul 26 18:03:25 2012] fullrun_pn_xmm0110010201_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Thu Jul 26 18:03:25 2012] Fit fullrun_pn_xmm0110010201_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Fri Jul 27 04:14:19 2012] Warning, spatial fit 13 centroid is now closest to src. 2
[Fri Jul 27 04:14:19 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 04:14:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 04:14:19 2012] Assessing source extent using major axis lower bound
[Fri Jul 27 04:14:19 2012] Source does appear to be extended
[Fri Jul 27 04:14:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 04:14:37 2012] Counts = 173131.000000, rescaling region sizes by 3.000000
[Fri Jul 27 04:14:37 2012] XMMSAS src. selection expression = ellipse(27090.503200, 30556.731800, 3029.670087, 3029.670087, 0.000000, X, Y)
[Fri Jul 27 04:14:37 2012] Writing source region out to fullrun_pn_xmm0110010201_pi300-10000_pass1_cl_src13_src.reg
[Fri Jul 27 04:14:37 2012] Extracting stamp from image fullrun_pn_xmm0110010201_pi300-10000_cl_sm2.00.img.gz, (138, 178) - (486, 526)
[Fri Jul 27 04:14:37 2012] XMMSAS bgd. selection expression = annulus(27090.503200, 30556.731800, 15148.350436, 30296.700872, X, Y) && !ellipse(25447.157040, 27791.013000, 4096.248118, 4096.248118, 180.487000, X, Y) && !ellipse(27390.328000, 30466.103200, 7884.912227, 7884.912227, 0.000000, X, Y) && !ellipse(25852.822034, 30056.640175, 3761.952108, 2637.428290, 157.395244, X, Y) && !ellipse(28779.497800, 30338.632600, 4096.248118, 4070.256117, 47.240000, X, Y) && !ellipse(25628.503387, 28938.244324, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(27513.262000, 29107.825780, 3761.952108, 3761.952108, 0.000000, X, Y) && !ellipse(29678.727200, 28478.847200, 4000.896115, 4000.896115, 0.000000, X, Y) && !ellipse(27295.884800, 27770.427000, 3510.552101, 3510.552101, 0.000000, X, Y) && !ellipse(28909.450283, 27429.604000, 3847.536111, 3847.536111, 188.423000, X, Y) && !ellipse(29592.954000, 27794.077400, 7936.488228, 7936.488228, 0.000000, X, Y) && !ellipse(25599.964000, 27752.334600, 6631.368191, 6631.368191, 0.000000, X, Y) && !ellipse(24654.266937, 28218.736694, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(23181.430000, 30885.828000, 1361.192039, 1361.192039, 0.000000, X, Y) && !ellipse(22199.830414, 29529.405182, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24101.658000, 29938.364000, 7133.088205, 5499.912158, 46.096500, X, Y) && !ellipse(23205.308594, 28468.070496, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30857.657928, 28306.381866, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31023.448578, 27175.270355, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31615.202000, 25195.460000, 1387.528040, 1387.528040, 0.000000, X, Y) && !ellipse(31292.110992, 25627.470581, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28448.415000, 25667.898000, 3581.472103, 3581.472103, 0.000000, X, Y) && !ellipse(27528.128160, 26882.400424, 4708.488135, 4708.488135, 0.000000, X, Y) && !ellipse(21083.455643, 28401.708038, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22724.618195, 25884.365906, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27622.470215, 24153.504517, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jul 27 04:14:37 2012] Writing fullrun_pn_xmm0110010201_pi300-10000_pass1_cl_src13.gif
[Fri Jul 27 05:56:15 2012] Mean detx,y = (-319.53, -2318.09) 
[Fri Jul 27 05:56:25 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 27 06:02:29 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 27 06:02:30 2012] Setting source spectrum file to fullrun_pn_xmm0110010201_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Fri Jul 27 06:02:30 2012] Setting bgd. spectrum file to fullrun_pn_xmm0110010201_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Fri Aug  3 22:38:49 2012] Updating aperture counts using extracted products
[Fri Aug  3 22:38:49 2012] Error reading totcts from fullrun_pn_xmm0110010201_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Fri Aug  3 22:38:51 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug  3 22:38:51 2012] Using photon index=1.80, rate=9.43, arf fullrun_pn_xmm0110010201_pi300-10000_pass1_cl_src13.arf
[Fri Aug  3 22:38:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug  3 22:38:51 2012] Updating source flux to 2.4e-11
[Fri Aug  3 22:44:29 2012] Flag c found in src. 13 procflags, skipping spectral fitting