[Sun Jul 22 10:59:30 2012] Detection parameters:
  Position = (329.4, 337.1) = 23 23 17.89 58 49 21.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 33206.6 +/- 223.1
  Background counts = 21.1
  Rate = 2 +/- 0.02

[Sun Jul 22 10:59:33 2012] Off-axis axis estimate = 3.59'
[Tue Jul 24 19:16:00 2012] Using EEF radius (= 8.22 ")to estimate initial spatial extent for simple fitting
[Tue Jul 24 19:16:00 2012] Initial guess for spatial extent in simple fitting = 8.22"
[Tue Jul 24 19:16:00 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.875
[Tue Jul 24 19:16:00 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 8.22"
[Wed Jul 25 18:22:11 2012] fullrun_mos2_xmm0110010201_pi300-10000_cl_pass0_src13.ximg exists
[Wed Jul 25 18:22:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110010201_pi300-10000_cl_pass0_src13.csv
[Wed Jul 25 18:22:11 2012] fullrun_mos2_xmm0110010201_pi300-10000_cl_pass0_src13_1.ximg exists
[Wed Jul 25 18:22:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110010201_pi300-10000_cl_pass0_src13.csv
[Wed Jul 25 18:22:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110010201_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110010201_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 25 18:22:11 2012] fullrun_mos2_xmm0110010201_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Wed Jul 25 18:22:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110010201_pi300-10000_cl_pass0_tfrozen_src13.csv
[Wed Jul 25 18:22:11 2012] fullrun_mos2_xmm0110010201_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Wed Jul 25 18:22:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110010201_pi300-10000_cl_pass0_tfrozen_src13.csv
[Wed Jul 25 18:22:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110010201_pi300-10000_cl_pass0_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110010201_pi300-10000_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 25 18:22:45 2012] Spatial fit model total counts = 162814.000000, observed total counts = 191073.000000
[Wed Jul 25 18:22:45 2012] Poor agreement between spatial fit and data for source 7
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jul 25 18:22:45 2012] Vigneting correction estimate = 1.000000
[Wed Jul 25 18:22:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 25 18:22:45 2012] Assessing source extent using major
[Wed Jul 25 18:22:45 2012] Source does appear to be extended
[Wed Jul 25 18:22:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 26 19:29:50 2012] Using EEF radius (= 8.22 ")to estimate initial spatial extent for simple fitting
[Thu Jul 26 19:29:50 2012] Initial guess for spatial extent in simple fitting = 8.22"
[Thu Jul 26 19:29:50 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.875
[Thu Jul 26 19:29:50 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 8.22"
[Fri Jul 27 04:14:11 2012] fullrun_mos2_xmm0110010201_pi300-10000_cl_pass1_src13.ximg exists
[Fri Jul 27 04:14:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110010201_pi300-10000_cl_pass1_src13.csv
[Fri Jul 27 04:14:11 2012] fullrun_mos2_xmm0110010201_pi300-10000_cl_pass1_src13_1.ximg exists
[Fri Jul 27 04:14:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110010201_pi300-10000_cl_pass1_src13.csv
[Fri Jul 27 04:14:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110010201_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110010201_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 04:14:11 2012] fullrun_mos2_xmm0110010201_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Fri Jul 27 04:14:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110010201_pi300-10000_cl_pass1_tfrozen_src13.csv
[Fri Jul 27 04:14:11 2012] fullrun_mos2_xmm0110010201_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Fri Jul 27 04:14:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110010201_pi300-10000_cl_pass1_tfrozen_src13.csv
[Fri Jul 27 04:14:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110010201_pi300-10000_cl_pass1_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110010201_pi300-10000_cl_pass1_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 04:14:27 2012] Spatial fit model total counts = 221959.000000, observed total counts = 191073.000000
[Fri Jul 27 04:14:27 2012] Poor agreement between spatial fit and data for source 7
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jul 27 04:14:27 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 04:14:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 04:14:27 2012] Assessing source extent using major
[Fri Jul 27 04:14:27 2012] Source does appear to be extended
[Fri Jul 27 04:14:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 27 04:14:27 2012] Source is confused with source 3
[Fri Jul 27 04:14:27 2012] Source is confused with source 10
[Fri Jul 27 04:14:27 2012] Source is confused with source 13
[Wed Aug  1 05:33:29 2012] Counts = 33206.601562, rescaling region sizes by 3.000000
[Wed Aug  1 05:33:29 2012] XMMSAS src. selection expression = ellipse(28607.225891, 29275.661377, 1957.500000, 1957.500000, 0.000000, X, Y)
[Wed Aug  1 05:33:29 2012] Writing source region out to fullrun_mos2_xmm0110010201_pi300-10000_pass1_cl_src7_src.reg
[Wed Aug  1 05:33:29 2012] Extracting stamp from image fullrun_mos2_xmm0110010201_pi300-10000_cl_sm2.00.img.gz, (217, 225) - (442, 450)
[Wed Aug  1 05:33:29 2012] XMMSAS bgd. selection expression = annulus(28607.225891, 29275.661377, 9787.500000, 19575.000000, X, Y) && !ellipse(25603.530000, 27999.514000, 3530.280102, 3530.280102, 0.000000, X, Y) && !ellipse(27946.428000, 29800.836000, 7526.592217, 7526.592217, 0.000000, X, Y) && !ellipse(25872.566100, 27483.112200, 6399.216184, 6399.216184, 0.000000, X, Y) && !ellipse(27000.848206, 30385.925598, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(24987.208000, 28724.410000, 3717.216107, 3717.216107, 0.000000, X, Y) && !ellipse(25695.444800, 29983.401200, 3913.560113, 3913.560113, 0.000000, X, Y) && !ellipse(28794.240845, 30089.911072, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(29468.148346, 27971.848175, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(26013.187400, 27712.200000, 3530.280102, 3530.280102, 0.000000, X, Y) && !ellipse(29518.690000, 28262.546000, 7259.232209, 7259.232209, 0.000000, X, Y) && !ellipse(24971.790000, 28418.526000, 7398.888213, 6468.024186, 82.086000, X, Y) && !ellipse(27352.835400, 27849.088200, 3512.256101, 3512.256101, 0.000000, X, Y) && !ellipse(27490.074000, 29403.378000, 3763.296108, 3763.296108, 0.000000, X, Y) && !ellipse(29203.172000, 27738.496000, 7827.120225, 5022.432145, 296.377000, X, Y) && !ellipse(27424.752838, 26675.864655, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(28800.250000, 26173.754000, 3581.472103, 3581.472103, 0.000000, X, Y) && !ellipse(30034.216000, 34143.444000, 1669.840048, 1669.840048, 0.000000, X, Y)
[Wed Aug  1 05:33:29 2012] Writing fullrun_mos2_xmm0110010201_pi300-10000_pass1_cl_src7.gif
[Wed Aug  1 07:20:03 2012] Mean detx,y = (-782.07, 1994.48) 
[Wed Aug  1 07:20:10 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug  1 07:30:43 2012] Binned source spectrum to 10 counts/bin
[Wed Aug  1 07:30:43 2012] Setting source spectrum file to fullrun_mos2_xmm0110010201_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Wed Aug  1 07:30:43 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0110010201_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Fri Aug  3 11:00:15 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Aug  3 11:00:15 2012] rmf not generated due to insufficient counts
[Fri Aug  3 22:38:54 2012] Updating aperture counts using extracted products
[Fri Aug  3 22:38:54 2012] Error reading totcts from fullrun_mos2_xmm0110010201_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Fri Aug  3 22:38:55 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug  3 22:38:55 2012] Using photon index=1.80, rate=2.48, arf fullrun_mos2_xmm0110010201_pi300-10000_pass1_cl_src7.arf
[Fri Aug  3 22:38:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug  3 22:38:55 2012] Updating source flux to 2.4e-11
[Fri Aug  3 22:40:01 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting