[Sun Jul 22 10:59:32 2012] Detection parameters:
  Position = (236.9, 330.1) = 23 24 9.69 58 48 53.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 93.1 +/- 14.1
  Background counts = 89.9
  Rate = 0.008 +/- 0.001

[Sun Jul 22 10:59:33 2012] Off-axis axis estimate = 5.02'
[Tue Jul 24 19:16:00 2012] Using EEF radius (= 8.94 ")to estimate initial spatial extent for simple fitting
[Tue Jul 24 19:16:00 2012] Initial guess for spatial extent in simple fitting = 8.94"
[Tue Jul 24 19:16:00 2012] source mask rpix=2.1, npix_max = 26, mask sum = 20, frac = 0.766
[Tue Jul 24 19:16:00 2012] Giving source the simple spatial ID 33 for pass 0, mean size = 8.94"
[Wed Jul 25 18:22:11 2012] fullrun_mos2_xmm0110010201_pi300-10000_cl_pass0_src33.ximg exists
[Wed Jul 25 18:22:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110010201_pi300-10000_cl_pass0_src33.csv
[Wed Jul 25 18:22:11 2012] fullrun_mos2_xmm0110010201_pi300-10000_cl_pass0_src33_1.ximg exists
[Wed Jul 25 18:22:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110010201_pi300-10000_cl_pass0_src33.csv
[Wed Jul 25 18:22:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110010201_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110010201_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 25 18:22:12 2012] fullrun_mos2_xmm0110010201_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Wed Jul 25 18:22:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110010201_pi300-10000_cl_pass0_tfrozen_src33.csv
[Wed Jul 25 18:22:12 2012] fullrun_mos2_xmm0110010201_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Wed Jul 25 18:22:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110010201_pi300-10000_cl_pass0_tfrozen_src33.csv
[Wed Jul 25 18:22:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110010201_pi300-10000_cl_pass0_tfrozen_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110010201_pi300-10000_cl_pass0_tfrozen_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 25 18:22:45 2012] Source 35 is offset by 1.685252 and 0.923475 pixels which is larger than
2 X fitted extent = 1.447195 x 1.447195, not incorporating fit results
[Wed Jul 25 18:22:45 2012] Vigneting correction estimate = 1.000000
[Wed Jul 25 18:22:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 25 18:22:45 2012] Assessing source extent using major
[Wed Jul 25 18:22:45 2012] Source does appear to be extended
[Wed Jul 25 18:22:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 25 18:22:45 2012] Deleting source due to low Poisson probability 0.7