[Sun Jul 22 10:59:32 2012] Detection parameters:
  Position = (235.2, 343.5) = 23 24 10.67 58 49 46.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 121.3 +/- 17.0
  Background counts = 81.2
  Rate = 0.01 +/- 0.001

[Sun Jul 22 10:59:33 2012] Off-axis axis estimate = 5.63'
[Tue Jul 24 19:16:00 2012] Using EEF radius (= 9.24 ")to estimate initial spatial extent for simple fitting
[Tue Jul 24 19:16:00 2012] Initial guess for spatial extent in simple fitting = 9.24"
[Tue Jul 24 19:16:00 2012] source mask rpix=2.1, npix_max = 27, mask sum = 22, frac = 0.798
[Tue Jul 24 19:16:00 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 9.24"
[Wed Jul 25 18:22:11 2012] fullrun_mos2_xmm0110010201_pi300-10000_cl_pass0_src27.ximg exists
[Wed Jul 25 18:22:11 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0110010201_pi300-10000_cl_pass0_src27.csv
[Wed Jul 25 18:22:11 2012] fullrun_mos2_xmm0110010201_pi300-10000_cl_pass0_src27_1.ximg exists
[Wed Jul 25 18:22:11 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0110010201_pi300-10000_cl_pass0_src27.csv
[Wed Jul 25 18:22:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110010201_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110010201_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 25 18:22:12 2012] fullrun_mos2_xmm0110010201_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Wed Jul 25 18:22:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110010201_pi300-10000_cl_pass0_tfrozen_src27.csv
[Wed Jul 25 18:22:12 2012] fullrun_mos2_xmm0110010201_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Wed Jul 25 18:22:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110010201_pi300-10000_cl_pass0_tfrozen_src27.csv
[Wed Jul 25 18:22:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110010201_pi300-10000_cl_pass0_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110010201_pi300-10000_cl_pass0_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 25 18:22:45 2012] Spatial fit model total counts = -656.727000, observed total counts = 1091.000000
[Wed Jul 25 18:22:45 2012] Poor agreement between spatial fit and data for source 33
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jul 25 18:22:45 2012] Vigneting correction estimate = 1.000000
[Wed Jul 25 18:22:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 25 18:22:45 2012] Assessing source extent using major
[Wed Jul 25 18:22:45 2012] Source does appear to be extended
[Wed Jul 25 18:22:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 25 18:22:45 2012] Deleting source due to low Poisson probability 0.8