[Sun Jul 22 10:58:32 2012] Detection parameters:
  Position = (393.7, 283.5) = 23 22 41.98 58 45 28.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 69.3 +/- 15.6
  Background counts = 77.2
  Rate = 0.004 +/- 0.001

[Sun Jul 22 10:58:33 2012] Off-axis axis estimate = 6.99'
[Tue Jul 24 13:31:24 2012] Using EEF radius (= 9.92 ")to estimate initial spatial extent for simple fitting
[Tue Jul 24 13:31:24 2012] Initial guess for spatial extent in simple fitting = 9.92"
[Tue Jul 24 13:31:24 2012] source mask rpix=2.3, npix_max = 30, mask sum = 25, frac = 0.808
[Tue Jul 24 13:31:24 2012] Giving source the simple spatial ID 56 for pass 0, mean size = 9.92"
[Tue Jul 24 19:15:57 2012] fullrun_mos1_xmm0110010201_pi300-10000_cl_pass0_src56.ximg exists
[Tue Jul 24 19:15:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010201_pi300-10000_cl_pass0_src56.csv
[Tue Jul 24 19:15:57 2012] fullrun_mos1_xmm0110010201_pi300-10000_cl_pass0_src56_1.ximg exists
[Tue Jul 24 19:15:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010201_pi300-10000_cl_pass0_src56.csv
[Tue Jul 24 19:15:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110010201_pi300-10000_cl_pass0_src56_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110010201_pi300-10000_cl_pass0_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 24 19:15:59 2012] fullrun_mos1_xmm0110010201_pi300-10000_cl_pass0_tfrozen_src56.ximg exists
[Tue Jul 24 19:15:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010201_pi300-10000_cl_pass0_tfrozen_src56.csv
[Tue Jul 24 19:15:59 2012] fullrun_mos1_xmm0110010201_pi300-10000_cl_pass0_tfrozen_src56_1.ximg exists
[Tue Jul 24 19:15:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010201_pi300-10000_cl_pass0_tfrozen_src56.csv
[Tue Jul 24 19:15:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110010201_pi300-10000_cl_pass0_tfrozen_src56_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110010201_pi300-10000_cl_pass0_tfrozen_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 25 18:22:37 2012] Source 65 is offset by 0.102169 and 4.269025 pixels which is larger than
2 X fitted extent = 1.269214 x 1.269214, not incorporating fit results
[Wed Jul 25 18:22:37 2012] Spatial fit model total counts = 1251.350000, observed total counts = 884.000000
[Wed Jul 25 18:22:37 2012] Poor agreement between spatial fit and data for source 65
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jul 25 18:22:37 2012] Vigneting correction estimate = 1.000000
[Wed Jul 25 18:22:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 25 18:22:37 2012] Assessing source extent using major
[Wed Jul 25 18:22:37 2012] Source does appear to be extended
[Wed Jul 25 18:22:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 25 18:22:37 2012] Deleting source due to low Poisson probability 0.8