[Sun Jul 22 10:58:32 2012] Detection parameters:
  Position = (231.1, 301.1) = 23 24 12.90 58 46 44.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 87.0 +/- 16.3
  Background counts = 90.8
  Rate = 0.007 +/- 0.001

[Sun Jul 22 10:58:33 2012] Off-axis axis estimate = 4.89'
[Tue Jul 24 13:31:24 2012] Using EEF radius (= 8.87 ")to estimate initial spatial extent for simple fitting
[Tue Jul 24 13:31:24 2012] Initial guess for spatial extent in simple fitting = 8.87"
[Tue Jul 24 13:31:24 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.969
[Tue Jul 24 13:31:24 2012] Giving source the simple spatial ID 36 for pass 0, mean size = 8.87"
[Tue Jul 24 19:15:57 2012] fullrun_mos1_xmm0110010201_pi300-10000_cl_pass0_src36.ximg exists
[Tue Jul 24 19:15:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010201_pi300-10000_cl_pass0_src36.csv
[Tue Jul 24 19:15:57 2012] fullrun_mos1_xmm0110010201_pi300-10000_cl_pass0_src36_1.ximg exists
[Tue Jul 24 19:15:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010201_pi300-10000_cl_pass0_src36.csv
[Tue Jul 24 19:15:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110010201_pi300-10000_cl_pass0_src36_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110010201_pi300-10000_cl_pass0_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 24 19:15:59 2012] fullrun_mos1_xmm0110010201_pi300-10000_cl_pass0_tfrozen_src36.ximg exists
[Tue Jul 24 19:15:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010201_pi300-10000_cl_pass0_tfrozen_src36.csv
[Tue Jul 24 19:15:59 2012] fullrun_mos1_xmm0110010201_pi300-10000_cl_pass0_tfrozen_src36_1.ximg exists
[Tue Jul 24 19:15:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010201_pi300-10000_cl_pass0_tfrozen_src36.csv
[Tue Jul 24 19:15:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110010201_pi300-10000_cl_pass0_tfrozen_src36_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110010201_pi300-10000_cl_pass0_tfrozen_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 25 18:22:37 2012] Warning, spatial fit 36 centroid is now closest to src. 69
[Wed Jul 25 18:22:37 2012] Warning: source 53 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 59 at 10.695736 pixels away
[Wed Jul 25 18:22:37 2012] Vigneting correction estimate = 1.000000
[Wed Jul 25 18:22:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 25 18:22:37 2012] Assessing source extent using major
[Wed Jul 25 18:22:37 2012] Source does appear to be extended
[Wed Jul 25 18:22:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 25 18:22:37 2012] Deleting source due to low Poisson probability 0.8