[Sun Jul 22 10:58:31 2012] Detection parameters:
  Position = (234.9, 339.1) = 23 24 10.83 58 49 30.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 78.1 +/- 17.2
  Background counts = 97.9
  Rate = 0.006 +/- 0.001

[Sun Jul 22 10:58:33 2012] Off-axis axis estimate = 5.47'
[Tue Jul 24 13:31:24 2012] Using EEF radius (= 9.16 ")to estimate initial spatial extent for simple fitting
[Tue Jul 24 13:31:24 2012] Initial guess for spatial extent in simple fitting = 9.16"
[Tue Jul 24 13:31:24 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.104
[Tue Jul 24 13:31:24 2012] Giving source the simple spatial ID 42 for pass 0, mean size = 9.16"
[Tue Jul 24 19:15:57 2012] fullrun_mos1_xmm0110010201_pi300-10000_cl_pass0_src42.ximg exists
[Tue Jul 24 19:15:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010201_pi300-10000_cl_pass0_src42.csv
[Tue Jul 24 19:15:57 2012] fullrun_mos1_xmm0110010201_pi300-10000_cl_pass0_src42_1.ximg exists
[Tue Jul 24 19:15:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010201_pi300-10000_cl_pass0_src42.csv
[Tue Jul 24 19:15:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110010201_pi300-10000_cl_pass0_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110010201_pi300-10000_cl_pass0_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 24 19:15:59 2012] fullrun_mos1_xmm0110010201_pi300-10000_cl_pass0_tfrozen_src42.ximg exists
[Tue Jul 24 19:15:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010201_pi300-10000_cl_pass0_tfrozen_src42.csv
[Tue Jul 24 19:15:59 2012] fullrun_mos1_xmm0110010201_pi300-10000_cl_pass0_tfrozen_src42_1.ximg exists
[Tue Jul 24 19:15:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010201_pi300-10000_cl_pass0_tfrozen_src42.csv
[Tue Jul 24 19:15:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110010201_pi300-10000_cl_pass0_tfrozen_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110010201_pi300-10000_cl_pass0_tfrozen_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 25 18:22:37 2012] Source 52 is offset by 5.384060 and -2.951363 pixels which is larger than
2 X fitted extent = 1.059766 x 1.059766, not incorporating fit results
[Wed Jul 25 18:22:37 2012] Warning, spatial fit 42 centroid is now closest to src. 23
[Wed Jul 25 18:22:37 2012] Vigneting correction estimate = 1.000000
[Wed Jul 25 18:22:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 25 18:22:37 2012] Assessing source extent using major
[Wed Jul 25 18:22:37 2012] Source does appear to be extended
[Wed Jul 25 18:22:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 25 18:22:37 2012] Deleting source due to low Poisson probability 0.8