[Sun Jul 22 10:58:28 2012] Detection parameters:
  Position = (326.9, 318.9) = 23 23 19.26 58 48 3.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 26856.4 +/- 190.6
  Background counts = 22.0
  Rate = 2 +/- 0.01

[Sun Jul 22 10:58:33 2012] Off-axis axis estimate = 2.54'
[Tue Jul 24 13:31:24 2012] Using EEF radius (= 7.70 ")to estimate initial spatial extent for simple fitting
[Tue Jul 24 13:31:24 2012] Initial guess for spatial extent in simple fitting = 7.70"
[Tue Jul 24 13:31:24 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.776
[Tue Jul 24 13:31:24 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 7.70"
[Tue Jul 24 19:15:56 2012] fullrun_mos1_xmm0110010201_pi300-10000_cl_pass0_src4.ximg exists
[Tue Jul 24 19:15:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010201_pi300-10000_cl_pass0_src4.csv
[Tue Jul 24 19:15:56 2012] fullrun_mos1_xmm0110010201_pi300-10000_cl_pass0_src4_1.ximg exists
[Tue Jul 24 19:15:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010201_pi300-10000_cl_pass0_src4.csv
[Tue Jul 24 19:15:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110010201_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110010201_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 24 19:15:58 2012] fullrun_mos1_xmm0110010201_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Tue Jul 24 19:15:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010201_pi300-10000_cl_pass0_tfrozen_src4.csv
[Tue Jul 24 19:15:58 2012] fullrun_mos1_xmm0110010201_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Tue Jul 24 19:15:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010201_pi300-10000_cl_pass0_tfrozen_src4.csv
[Tue Jul 24 19:15:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110010201_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110010201_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 25 18:22:37 2012] Spatial fit model total counts = 119275.000000, observed total counts = 84826.000000
[Wed Jul 25 18:22:37 2012] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jul 25 18:22:37 2012] Vigneting correction estimate = 1.000000
[Wed Jul 25 18:22:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 25 18:22:37 2012] Assessing source extent using major
[Wed Jul 25 18:22:37 2012] Source does appear to be extended
[Wed Jul 25 18:22:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 25 18:22:37 2012] Source is confused with source 1
[Thu Jul 26 18:03:25 2012] Using EEF radius (= 7.70 ")to estimate initial spatial extent for simple fitting
[Thu Jul 26 18:03:25 2012] Initial guess for spatial extent in simple fitting = 7.70"
[Thu Jul 26 18:03:25 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.776
[Thu Jul 26 18:03:25 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 7.70"
[Thu Jul 26 19:29:49 2012] fullrun_mos1_xmm0110010201_pi300-10000_cl_pass1_src4.ximg exists
[Thu Jul 26 19:29:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010201_pi300-10000_cl_pass1_src4.csv
[Thu Jul 26 19:29:49 2012] fullrun_mos1_xmm0110010201_pi300-10000_cl_pass1_src4_1.ximg exists
[Thu Jul 26 19:29:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010201_pi300-10000_cl_pass1_src4.csv
[Thu Jul 26 19:29:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110010201_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110010201_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 26 19:29:50 2012] fullrun_mos1_xmm0110010201_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Thu Jul 26 19:29:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010201_pi300-10000_cl_pass1_tfrozen_src4.csv
[Thu Jul 26 19:29:50 2012] fullrun_mos1_xmm0110010201_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Thu Jul 26 19:29:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010201_pi300-10000_cl_pass1_tfrozen_src4.csv
[Thu Jul 26 19:29:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110010201_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110010201_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 27 04:14:23 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 10.370968 pixels away
[Fri Jul 27 04:14:23 2012] Spatial fit model total counts = 187805.000000, observed total counts = 84826.000000
[Fri Jul 27 04:14:23 2012] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jul 27 04:14:23 2012] Vigneting correction estimate = 1.000000
[Fri Jul 27 04:14:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 27 04:14:23 2012] Assessing source extent using major
[Fri Jul 27 04:14:23 2012] Source does appear to be extended
[Fri Jul 27 04:14:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 30 09:52:49 2012] Counts = 26856.441406, rescaling region sizes by 3.000000
[Mon Jul 30 09:52:49 2012] XMMSAS src. selection expression = ellipse(28395.397034, 27695.079956, 1957.500000, 1957.500000, 0.000000, X, Y)
[Mon Jul 30 09:52:49 2012] Writing source region out to fullrun_mos1_xmm0110010201_pi300-10000_pass1_cl_src4_src.reg
[Mon Jul 30 09:52:49 2012] Extracting stamp from image fullrun_mos1_xmm0110010201_pi300-10000_cl_sm2.00.img.gz, (214, 206) - (439, 431)
[Mon Jul 30 09:52:49 2012] XMMSAS bgd. selection expression = annulus(28395.397034, 27695.079956, 9787.500000, 19575.000000, X, Y) && !ellipse(27088.860000, 26944.134400, 6881.184198, 6881.184198, 0.000000, X, Y) && !ellipse(28272.024000, 26953.602000, 3594.720103, 3594.720103, 0.000000, X, Y) && !ellipse(27632.923600, 26726.230200, 3440.592099, 3440.592099, 0.000000, X, Y) && !ellipse(29302.070953, 33867.223907, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30719.992004, 33655.742859, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27200.278076, 34179.181885, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26411.954742, 34332.257599, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34440.306000, 25771.811400, 1629.224047, 1629.224047, 0.000000, X, Y) && !ellipse(28594.088806, 33995.849457, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29135.223602, 34216.808960, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul 30 09:52:49 2012] Writing fullrun_mos1_xmm0110010201_pi300-10000_pass1_cl_src4.gif
[Mon Jul 30 10:25:25 2012] Mean detx,y = (234.80, -34.66) 
[Mon Jul 30 10:25:35 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 30 10:39:21 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 30 10:39:21 2012] Setting source spectrum file to fullrun_mos1_xmm0110010201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Mon Jul 30 10:39:21 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0110010201_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Wed Aug  1 03:18:12 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Aug  1 03:18:12 2012] rmf not generated due to insufficient counts
[Fri Aug  3 22:38:52 2012] Updating aperture counts using extracted products
[Fri Aug  3 22:38:52 2012] Error reading totcts from fullrun_mos1_xmm0110010201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Aug  3 22:38:53 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug  3 22:38:53 2012] Using photon index=1.80, rate=1.53, arf fullrun_mos1_xmm0110010201_pi300-10000_pass1_cl_src4.arf
[Fri Aug  3 22:38:53 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug  3 22:38:53 2012] Updating source flux to 1.6e-11
[Fri Aug  3 22:38:57 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting