[Sun Jul 22 10:58:30 2012] Detection parameters:
  Position = (497.7, 259.2) = 23 21 43.87 58 43 41.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 71.7 +/- 12.0
  Background counts = 14.7
  Rate = 0.003 +/- 0.0006

[Sun Jul 22 10:58:33 2012] Off-axis axis estimate = 14.73'
[Tue Jul 24 13:31:24 2012] Using EEF radius (= 13.79 ")to estimate initial spatial extent for simple fitting
[Tue Jul 24 13:31:24 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jul 24 13:31:24 2012] Initial guess for spatial extent in simple fitting = 13.79"
[Tue Jul 24 13:31:24 2012] source mask rpix=3.2, npix_max = 53, mask sum = 47, frac = 0.872
[Tue Jul 24 13:31:24 2012] Giving source the simple spatial ID 63 for pass 0, mean size = 13.79"
[Tue Jul 24 19:15:58 2012] fullrun_mos1_xmm0110010201_pi300-10000_cl_pass0_src63.ximg exists
[Tue Jul 24 19:15:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010201_pi300-10000_cl_pass0_src63.csv
[Tue Jul 24 19:15:58 2012] fullrun_mos1_xmm0110010201_pi300-10000_cl_pass0_src63_1.ximg exists
[Tue Jul 24 19:15:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010201_pi300-10000_cl_pass0_src63.csv
[Tue Jul 24 19:15:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110010201_pi300-10000_cl_pass0_src63_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110010201_pi300-10000_cl_pass0_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 24 19:16:00 2012] fullrun_mos1_xmm0110010201_pi300-10000_cl_pass0_tfrozen_src63.ximg exists
[Tue Jul 24 19:16:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010201_pi300-10000_cl_pass0_tfrozen_src63.csv
[Tue Jul 24 19:16:00 2012] fullrun_mos1_xmm0110010201_pi300-10000_cl_pass0_tfrozen_src63_1.ximg exists
[Tue Jul 24 19:16:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010201_pi300-10000_cl_pass0_tfrozen_src63.csv
[Tue Jul 24 19:16:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110010201_pi300-10000_cl_pass0_tfrozen_src63_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110010201_pi300-10000_cl_pass0_tfrozen_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 25 18:22:37 2012] Warning: source 63 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 34 at 17.951508 pixels away
[Wed Jul 25 18:22:37 2012] Vigneting correction estimate = 1.000000
[Wed Jul 25 18:22:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 25 18:22:37 2012] Assessing source extent using major
[Wed Jul 25 18:22:37 2012] Source does appear to be extended
[Wed Jul 25 18:22:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 25 18:22:37 2012] Deleting source due to low Poisson probability 0.8