[Sun Jul 22 10:58:30 2012] Detection parameters:
  Position = (240.5, 350.8) = 23 24 7.69 58 50 23.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 76.7 +/- 13.9
  Background counts = 93.2
  Rate = 0.004 +/- 0.0007

[Sun Jul 22 10:58:33 2012] Off-axis axis estimate = 5.66'
[Tue Jul 24 13:31:24 2012] Using EEF radius (= 9.26 ")to estimate initial spatial extent for simple fitting
[Tue Jul 24 13:31:24 2012] Initial guess for spatial extent in simple fitting = 9.26"
[Tue Jul 24 13:31:24 2012] source mask rpix=2.1, npix_max = 27, mask sum = 14, frac = 0.506
[Tue Jul 24 13:31:24 2012] Giving source the simple spatial ID 61 for pass 0, mean size = 9.26"
[Tue Jul 24 19:15:58 2012] fullrun_mos1_xmm0110010201_pi300-10000_cl_pass0_src61.ximg exists
[Tue Jul 24 19:15:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010201_pi300-10000_cl_pass0_src61.csv
[Tue Jul 24 19:15:58 2012] fullrun_mos1_xmm0110010201_pi300-10000_cl_pass0_src61_1.ximg exists
[Tue Jul 24 19:15:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010201_pi300-10000_cl_pass0_src61.csv
[Tue Jul 24 19:15:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110010201_pi300-10000_cl_pass0_src61_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110010201_pi300-10000_cl_pass0_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 24 19:15:59 2012] fullrun_mos1_xmm0110010201_pi300-10000_cl_pass0_tfrozen_src61.ximg exists
[Tue Jul 24 19:15:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010201_pi300-10000_cl_pass0_tfrozen_src61.csv
[Tue Jul 24 19:15:59 2012] fullrun_mos1_xmm0110010201_pi300-10000_cl_pass0_tfrozen_src61_1.ximg exists
[Tue Jul 24 19:16:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010201_pi300-10000_cl_pass0_tfrozen_src61.csv
[Tue Jul 24 19:16:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110010201_pi300-10000_cl_pass0_tfrozen_src61_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110010201_pi300-10000_cl_pass0_tfrozen_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 25 18:22:37 2012] Spatial fit model total counts = 1364.780000, observed total counts = 1203.000000
[Wed Jul 25 18:22:37 2012] Poor agreement between spatial fit and data for source 32
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jul 25 18:22:37 2012] Warning, spatial fit 61 centroid is now closest to src. 23
[Wed Jul 25 18:22:37 2012] Vigneting correction estimate = 1.000000
[Wed Jul 25 18:22:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 25 18:22:37 2012] Assessing source extent using major
[Wed Jul 25 18:22:37 2012] Source does appear to be extended
[Wed Jul 25 18:22:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 25 18:22:37 2012] Deleting source due to low Poisson probability 0.8