[Sun Jul 22 10:58:30 2012] Detection parameters:
  Position = (281.5, 398.0) = 23 23 44.70 58 53 39.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 89.8 +/- 14.9
  Background counts = 90.9
  Rate = 0.004 +/- 0.0007

[Sun Jul 22 10:58:33 2012] Off-axis axis estimate = 7.32'
[Tue Jul 24 13:31:24 2012] Using EEF radius (= 10.09 ")to estimate initial spatial extent for simple fitting
[Tue Jul 24 13:31:24 2012] Initial guess for spatial extent in simple fitting = 10.09"
[Tue Jul 24 13:31:24 2012] source mask rpix=2.3, npix_max = 31, mask sum = 23, frac = 0.724
[Tue Jul 24 13:31:24 2012] Giving source the simple spatial ID 58 for pass 0, mean size = 10.09"
[Tue Jul 24 19:15:57 2012] fullrun_mos1_xmm0110010201_pi300-10000_cl_pass0_src58.ximg exists
[Tue Jul 24 19:15:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010201_pi300-10000_cl_pass0_src58.csv
[Tue Jul 24 19:15:57 2012] fullrun_mos1_xmm0110010201_pi300-10000_cl_pass0_src58_1.ximg exists
[Tue Jul 24 19:15:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010201_pi300-10000_cl_pass0_src58.csv
[Tue Jul 24 19:15:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110010201_pi300-10000_cl_pass0_src58_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110010201_pi300-10000_cl_pass0_src58.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 24 19:15:59 2012] fullrun_mos1_xmm0110010201_pi300-10000_cl_pass0_tfrozen_src58.ximg exists
[Tue Jul 24 19:15:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010201_pi300-10000_cl_pass0_tfrozen_src58.csv
[Tue Jul 24 19:15:59 2012] fullrun_mos1_xmm0110010201_pi300-10000_cl_pass0_tfrozen_src58_1.ximg exists
[Tue Jul 24 19:15:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110010201_pi300-10000_cl_pass0_tfrozen_src58.csv
[Tue Jul 24 19:15:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110010201_pi300-10000_cl_pass0_tfrozen_src58_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110010201_pi300-10000_cl_pass0_tfrozen_src58.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 25 18:22:37 2012] Warning, spatial fit 58 centroid is now closest to src. 37
[Wed Jul 25 18:22:37 2012] Source 30 is offset by 3.129698 and 7.368165 pixels which is larger than
2 X fitted extent = 1.176832 x 1.176832, not incorporating fit results
[Wed Jul 25 18:22:37 2012] Source 30 is offset by -1.870302 and 8.368165 pixels which is larger than
2 X fitted extent = 1.176832 x 1.176832, not incorporating fit results
[Wed Jul 25 18:22:37 2012] Vigneting correction estimate = 1.000000
[Wed Jul 25 18:22:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 25 18:22:37 2012] Assessing source extent using major
[Wed Jul 25 18:22:37 2012] Source does appear to be extended
[Wed Jul 25 18:22:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 25 18:22:37 2012] Deleting source due to low Poisson probability 0.8