[Mon May  6 05:58:47 2013] Detection parameters:
  Position = (291.4, 282.1) = 1 5 19.24 -72 23 41.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 416.3 +/- 29.2
  Background counts = 71.1
  Rate = 0.01 +/- 0.0009

[Mon May  6 05:58:47 2013] Off-axis axis estimate = 1.29'
[Mon May  6 07:11:25 2013] Using EEF radius (= 7.07 ")to estimate initial spatial extent for simple fitting
[Mon May  6 07:11:25 2013] Initial guess for spatial extent in simple fitting = 7.07"
[Mon May  6 07:11:25 2013] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.107
[Mon May  6 07:11:25 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 7.07"
[Mon May  6 07:41:01 2013] fullrun_mos2_xmm0110000301_pi300-10000_cl_pass0_src5.ximg exists
[Mon May  6 07:41:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110000301_pi300-10000_cl_pass0_src5.csv
[Mon May  6 07:41:01 2013] fullrun_mos2_xmm0110000301_pi300-10000_cl_pass0_src5_1.ximg exists
[Mon May  6 07:41:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110000301_pi300-10000_cl_pass0_src5.csv
[Mon May  6 07:41:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110000301_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110000301_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  6 07:41:01 2013] fullrun_mos2_xmm0110000301_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Mon May  6 07:41:01 2013] fullrun_mos2_xmm0110000301_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Mon May  6 07:41:01 2013] Fit fullrun_mos2_xmm0110000301_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Mon May  6 07:41:13 2013] Spatial fit model total counts = 1489.280000, observed total counts = 1370.000000
[Mon May  6 07:41:13 2013] Offset between fit and detection position for source 11 = 1.180092 pixels
[Mon May  6 07:41:13 2013] 1570.022800 total counts/ 1487.320000 bgd. counts: snr = 2.144460
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 1.180092 pixels
  Position = (291.2, 281.0) = 1 5 19.50 -72 23 43.8
  Extent = 6.4 (3.8-9.9)", rotation angle = 0
  Source counts = 82.7 +/- 39.6
  Background counts = 1487.3
  Rate = 0.003 +/- 0.002
[Mon May  6 07:41:13 2013] Vigneting correction estimate = 1.000000
[Mon May  6 07:41:13 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May  6 07:41:13 2013] Assessing source extent using major axis lower bound
[Mon May  6 07:41:13 2013] Source does appear to be extended
[Mon May  6 07:41:13 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May  6 08:54:40 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May  6 08:54:40 2013] Initial guess for spatial extent in simple fitting = 6.42"
[Mon May  6 08:54:40 2013] source mask rpix=1.5, npix_max = 15, mask sum = 14, frac = 0.897
[Mon May  6 08:54:40 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 6.42"
[Mon May  6 09:27:13 2013] fullrun_mos2_xmm0110000301_pi300-10000_cl_pass1_src5.ximg exists
[Mon May  6 09:27:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110000301_pi300-10000_cl_pass1_src5.csv
[Mon May  6 09:27:13 2013] fullrun_mos2_xmm0110000301_pi300-10000_cl_pass1_src5_1.ximg exists
[Mon May  6 09:27:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110000301_pi300-10000_cl_pass1_src5.csv
[Mon May  6 09:27:13 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110000301_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110000301_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  6 09:27:13 2013] fullrun_mos2_xmm0110000301_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Mon May  6 09:27:13 2013] fullrun_mos2_xmm0110000301_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Mon May  6 09:27:13 2013] Fit fullrun_mos2_xmm0110000301_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Mon May  6 09:27:25 2013] Spatial fit model total counts = 1455.330000, observed total counts = 1338.000000
[Mon May  6 09:27:25 2013] Offset between fit and detection position for source 11 = 0.234172 pixels
[Mon May  6 09:27:25 2013] 1518.492200 total counts/ 1424.380000 bgd. counts: snr = 2.493636
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.234172 pixels
  Position = (291.2, 281.2) = 1 5 19.43 -72 23 42.8
  Extent = 7.0 (4.3-11.0)", rotation angle = 0
  Source counts = 94.1 +/- 39.0
  Background counts = 1424.4
  Rate = 0.004 +/- 0.002
[Mon May  6 09:27:26 2013] Vigneting correction estimate = 1.000000
[Mon May  6 09:27:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May  6 09:27:26 2013] Assessing source extent using major axis lower bound
[Mon May  6 09:27:26 2013] Source does appear to be extended
[Mon May  6 09:27:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May  6 11:51:08 2013] XMMSAS src. selection expression = ellipse(25287.201140, 24417.751400, 420.693612, 420.693612, 0.000000, X, Y)
[Mon May  6 11:51:08 2013] Writing source region out to fullrun_mos2_xmm0110000301_pi300-10000_pass1_cl_src11_src.reg
[Mon May  6 11:51:08 2013] Extracting stamp from image fullrun_mos2_xmm0110000301_pi300-10000_cl_sm2.00.img.gz, (267, 257) - (315, 305)
[Mon May  6 11:51:08 2013] XMMSAS bgd. selection expression = annulus(25287.201140, 24417.751400, 701.156020, 1402.312040, X, Y) && !ellipse(26704.138400, 25384.015200, 2205.008063, 1567.872045, 97.064410, X, Y) && !ellipse(26650.508400, 25708.812600, 1075.848031, 931.032027, 88.241070, X, Y) && !ellipse(27459.082367, 23620.929535, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27004.796234, 23839.058777, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25942.556183, 23747.420441, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26345.963989, 23551.144745, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May  6 11:51:08 2013] Writing fullrun_mos2_xmm0110000301_pi300-10000_pass1_cl_src11.gif
[Mon May  6 11:58:32 2013] Mean detx,y = (-198.80, -2356.18) 
[Mon May  6 11:58:33 2013] Setting backscal keywords in source and bgd. spectrum
[Mon May  6 11:58:37 2013] Binned source spectrum to 10 counts/bin
[Mon May  6 11:58:37 2013] Setting source spectrum file to fullrun_mos2_xmm0110000301_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Mon May  6 11:58:37 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0110000301_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Mon May  6 12:10:48 2013] Not generating rmf since there are only 94 counts
[Mon May  6 12:10:48 2013] rmf not generated due to insufficient counts
[Mon May  6 12:12:46 2013] Updating aperture counts using extracted products
[Mon May  6 12:12:46 2013] Total counts from fullrun_mos2_xmm0110000301_pi300-10000_pass1_cl_src11_src_b10.pi.gz = 473.00
[Mon May  6 12:12:46 2013] Total counts from fullrun_mos2_xmm0110000301_pi300-10000_pass1_cl_src11_bgd.pi.gz = 468.00
[Mon May  6 12:12:46 2013] Got source and background scale factors 492724.000000, 2056948.000000
[Mon May  6 12:12:46 2013] User source parameters:
  Position = (291.2, 281.2) = 1 5 19.43 -72 23 42.8
  Extent = 7.0 (4.3-11.0)", rotation angle = 0
  Source aperture counts = 360.9 +/- 22.8
  Background aperture counts = 112.1
  Rate = 0.01 +/- 0.0009

[Mon May  6 12:12:48 2013] Calculating source flux in energy range 0.30-8.00
[Mon May  6 12:12:48 2013] Using photon index=1.80, rate=0.00379, arf fullrun_mos2_xmm0110000301_pi300-10000_pass1_cl_src11.arf
[Mon May  6 12:12:48 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May  6 12:12:48 2013] Updating source flux to 6e-14
[Mon May  6 12:12:53 2013] Source 11 has fewer than 100.000000 counts, skipping spectral fitting
[Mon May  6 12:12:55 2013] xmm0110000301/analysis//spectral/fullrun_mos2_xmm0110000301_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete