[Mon May 6 05:58:47 2013] Detection parameters: Position = (323.9, 288.0) = 1 4 48.10 -72 23 13.3 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 542.4 +/- 32.8 Background counts = 71.7 Rate = 0.02 +/- 0.001 [Mon May 6 05:58:47 2013] Off-axis axis estimate = 2.00' [Mon May 6 07:11:25 2013] Using EEF radius (= 7.43 ")to estimate initial spatial extent for simple fitting [Mon May 6 07:11:25 2013] Initial guess for spatial extent in simple fitting = 7.43" [Mon May 6 07:11:25 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.821 [Mon May 6 07:11:25 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 7.43" [Mon May 6 07:41:01 2013] fullrun_mos2_xmm0110000301_pi300-10000_cl_pass0_src4.ximg exists [Mon May 6 07:41:01 2013] fullrun_mos2_xmm0110000301_pi300-10000_cl_pass0_src4_1.ximg exists [Mon May 6 07:41:01 2013] Fit fullrun_mos2_xmm0110000301_pi300-10000_cl_pass0_src4 appears to have run properly [Mon May 6 07:41:01 2013] fullrun_mos2_xmm0110000301_pi300-10000_cl_pass0_tfrozen_src4.ximg exists [Mon May 6 07:41:01 2013] fullrun_mos2_xmm0110000301_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists [Mon May 6 07:41:01 2013] Fit fullrun_mos2_xmm0110000301_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly [Mon May 6 07:41:13 2013] Source 10 is offset by 0.932088 and 8.000966 pixels which is larger than 2 X fitted extent = 0.871361 x 0.871361, not incorporating fit results [Mon May 6 07:41:13 2013] Spatial fit model total counts = 2073.440000, observed total counts = 1939.000000 [Mon May 6 07:41:13 2013] Offset between fit and detection position for source 10 = 0.759272 pixels [Mon May 6 07:41:13 2013] 1967.153000 total counts/ 1681.780000 bgd. counts: snr = 6.958703 Spatial fit parameters: Offset between fit and detection position for source 10 = 0.759272 pixels Position = (324.6, 288.3) = 1 4 47.46 -72 23 11.8 Extent = 14.9 (14.8-29.7)" x 7.4 (6.1-9.3)", rotation angle = 84 (71-96) degrees Source counts = 285.4 +/- 44.4 Background counts = 1681.8 Rate = 0.01 +/- 0.002 [Mon May 6 07:41:13 2013] Vigneting correction estimate = 1.000000 [Mon May 6 07:41:13 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon May 6 07:41:13 2013] Assessing source extent using major axis lower bound [Mon May 6 07:41:13 2013] Source does appear to be extended [Mon May 6 07:41:13 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.59 [Mon May 6 07:41:13 2013] Source is asymmetric [Mon May 6 08:54:40 2013] Using previous fit value to estimate initial spatial extent for simple fitting [Mon May 6 08:54:40 2013] Initial guess for spatial extent in simple fitting = 11.14" [Mon May 6 08:54:40 2013] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.960 [Mon May 6 08:54:40 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 11.14" [Mon May 6 09:27:13 2013] fullrun_mos2_xmm0110000301_pi300-10000_cl_pass1_src4.ximg exists [Mon May 6 09:27:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110000301_pi300-10000_cl_pass1_src4.csv [Mon May 6 09:27:13 2013] fullrun_mos2_xmm0110000301_pi300-10000_cl_pass1_src4_1.ximg exists [Mon May 6 09:27:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110000301_pi300-10000_cl_pass1_src4.csv [Mon May 6 09:27:13 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0110000301_pi300-10000_cl_pass1_src4_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0110000301_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon May 6 09:27:13 2013] fullrun_mos2_xmm0110000301_pi300-10000_cl_pass1_tfrozen_src4.ximg exists [Mon May 6 09:27:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110000301_pi300-10000_cl_pass1_tfrozen_src4.csv [Mon May 6 09:27:13 2013] fullrun_mos2_xmm0110000301_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists [Mon May 6 09:27:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110000301_pi300-10000_cl_pass1_tfrozen_src4.csv [Mon May 6 09:27:13 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0110000301_pi300-10000_cl_pass1_tfrozen_src4_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0110000301_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon May 6 09:27:25 2013] Warning, spatial fit 4 centroid is now closest to src. 15 [Mon May 6 09:27:26 2013] Vigneting correction estimate = 1.000000 [Mon May 6 09:27:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon May 6 09:27:26 2013] Assessing source extent using major axis lower bound [Mon May 6 09:27:26 2013] Source does appear to be extended [Mon May 6 09:27:26 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.59 [Mon May 6 09:27:26 2013] Source is asymmetric [Mon May 6 09:27:26 2013] Source is confused with source 2 [Mon May 6 11:51:08 2013] XMMSAS src. selection expression = ellipse(28189.298000, 25036.225400, 891.198026, 446.164213, 84.459058, X, Y) [Mon May 6 11:51:08 2013] Writing source region out to fullrun_mos2_xmm0110000301_pi300-10000_pass1_cl_src10_src.reg [Mon May 6 11:51:08 2013] Extracting stamp from image fullrun_mos2_xmm0110000301_pi300-10000_cl_sm2.00.img.gz, (273, 237) - (376, 340) [Mon May 6 11:51:08 2013] XMMSAS bgd. selection expression = annulus(28189.298000, 25036.225400, 1485.330043, 2970.660085, X, Y) && !ellipse(26704.138400, 25384.015200, 2205.008063, 1567.872045, 97.064410, X, Y) && !ellipse(26650.508400, 25708.812600, 1075.848031, 931.032027, 88.241070, X, Y) && !ellipse(27459.082367, 23620.929535, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25287.201140, 24417.751400, 560.924816, 560.924816, 0.000000, X, Y) && !ellipse(27004.796234, 23839.058777, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25942.556183, 23747.420441, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26345.963989, 23551.144745, 870.000000, 870.000000, 0.000000, X, Y) [Mon May 6 11:51:08 2013] Writing fullrun_mos2_xmm0110000301_pi300-10000_pass1_cl_src10.gif [Mon May 6 11:58:23 2013] Mean detx,y = (68.96, 483.23) [Mon May 6 11:58:24 2013] Setting backscal keywords in source and bgd. spectrum [Mon May 6 11:58:30 2013] Binned source spectrum to 10 counts/bin [Mon May 6 11:58:30 2013] Setting source spectrum file to fullrun_mos2_xmm0110000301_pi300-10000_pass1_cl_src10_src_b10.pi.gz [Mon May 6 11:58:30 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0110000301_pi300-10000_pass1_cl_src10_bgd.pi.gz [Mon May 6 12:12:46 2013] Updating aperture counts using extracted products [Mon May 6 12:12:46 2013] Total counts from fullrun_mos2_xmm0110000301_pi300-10000_pass1_cl_src10_src_b10.pi.gz = 1236.00 [Mon May 6 12:12:46 2013] Total counts from fullrun_mos2_xmm0110000301_pi300-10000_pass1_cl_src10_bgd.pi.gz = 2153.00 [Mon May 6 12:12:46 2013] Got source and background scale factors 1164968.000000, 12033780.000000 [Mon May 6 12:12:46 2013] User source parameters: Position = (324.6, 288.3) = 1 4 47.46 -72 23 11.8 Extent = 14.9 (14.8-29.7)" x 7.4 (6.1-9.3)", rotation angle = 84 (71-96) degrees Source aperture counts = 1027.6 +/- 36.2 Background aperture counts = 208.4 Rate = 0.04 +/- 0.001 [Mon May 6 12:12:48 2013] Calculating source flux in energy range 0.30-8.00 [Mon May 6 12:12:48 2013] Using photon index=1.80, rate=0.0115, arf fullrun_mos2_xmm0110000301_pi300-10000_pass1_cl_src10.arf [Mon May 6 12:12:48 2013] Assuming count rate is from the 0.30-10.00 bandpass [Mon May 6 12:12:48 2013] Updating source flux to 1.7e-13 [Mon May 6 12:12:53 2013] Flag b found in src. 10 procflags, skipping spectral fitting [Mon May 6 12:12:53 2013] Flag c found in src. 10 procflags, skipping spectral fitting [Mon May 6 12:12:55 2013] xmm0110000301/analysis//spectral/fullrun_mos2_xmm0110000301_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete