[Sun Aug 26 23:10:15 2012] Detection parameters: Position = (308.3, 291.0) = 0 59 37.21 -72 10 1.0 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 326.4 +/- 25.3 Background counts = 40.9 Rate = 0.02 +/- 0.002 [Sun Aug 26 23:10:16 2012] Off-axis axis estimate = 0.90' [Sun Aug 26 23:13:12 2012] Using EEF radius (= 6.88 ")to estimate initial spatial extent for simple fitting [Sun Aug 26 23:13:12 2012] Initial guess for spatial extent in simple fitting = 6.88" [Sun Aug 26 23:13:12 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.924 [Sun Aug 26 23:13:12 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 6.88" [Sun Aug 26 23:47:52 2012] fullrun_pn_xmm0110000201_pi300-10000_cl_pass0_src11.ximg exists [Sun Aug 26 23:47:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110000201_pi300-10000_cl_pass0_src11.csv [Sun Aug 26 23:47:52 2012] fullrun_pn_xmm0110000201_pi300-10000_cl_pass0_src11_1.ximg exists [Sun Aug 26 23:47:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110000201_pi300-10000_cl_pass0_src11.csv [Sun Aug 26 23:47:52 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0110000201_pi300-10000_cl_pass0_src11_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0110000201_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Aug 26 23:47:52 2012] fullrun_pn_xmm0110000201_pi300-10000_cl_pass0_tfrozen_src11.ximg exists [Sun Aug 26 23:47:52 2012] fullrun_pn_xmm0110000201_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists [Sun Aug 26 23:47:52 2012] Fit fullrun_pn_xmm0110000201_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly [Mon Aug 27 01:37:36 2012] Spatial fit model total counts = 1306.040000, observed total counts = 1305.000000 [Mon Aug 27 01:37:36 2012] Offset between fit and detection position for source 11 = 4.866801 pixels [Mon Aug 27 01:37:36 2012] 1338.454000 total counts/ 1018.890000 bgd. counts: snr = 10.011386 Spatial fit parameters: Offset between fit and detection position for source 11 = 4.866801 pixels Position = (312.0, 287.8) = 0 59 33.75 -72 10 16.0 Extent = 13.8 (13.7-27.5)", rotation angle = 0 Source counts = 319.6 +/- 36.6 Background counts = 1018.9 Rate = 0.02 +/- 0.003 [Mon Aug 27 01:37:36 2012] Vigneting correction estimate = 1.000000 [Mon Aug 27 01:37:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon Aug 27 01:37:36 2012] Assessing source extent using major axis lower bound [Mon Aug 27 01:37:36 2012] Source does appear to be extended [Mon Aug 27 01:37:36 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Mon Aug 27 01:37:36 2012] Source is confused with source 6 [Mon Aug 27 01:37:56 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Mon Aug 27 01:37:56 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Mon Aug 27 01:37:56 2012] Initial guess for spatial extent in simple fitting = 13.75" [Mon Aug 27 01:37:56 2012] source mask rpix=3.2, npix_max = 53, mask sum = 56, frac = 1.044 [Mon Aug 27 01:37:56 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 13.75" [Mon Aug 27 02:20:40 2012] fullrun_pn_xmm0110000201_pi300-10000_cl_pass1_src11.ximg exists [Mon Aug 27 02:20:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110000201_pi300-10000_cl_pass1_src11.csv [Mon Aug 27 02:20:40 2012] fullrun_pn_xmm0110000201_pi300-10000_cl_pass1_src11_1.ximg exists [Mon Aug 27 02:20:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110000201_pi300-10000_cl_pass1_src11.csv [Mon Aug 27 02:20:40 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0110000201_pi300-10000_cl_pass1_src11_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0110000201_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon Aug 27 02:20:40 2012] fullrun_pn_xmm0110000201_pi300-10000_cl_pass1_tfrozen_src11.ximg exists [Mon Aug 27 02:20:40 2012] fullrun_pn_xmm0110000201_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists [Mon Aug 27 02:20:40 2012] Fit fullrun_pn_xmm0110000201_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly [Mon Aug 27 04:22:01 2012] Warning, spatial fit 11 centroid is now closest to src. 21 [Mon Aug 27 04:22:01 2012] Vigneting correction estimate = 1.000000 [Mon Aug 27 04:22:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon Aug 27 04:22:01 2012] Assessing source extent using major axis lower bound [Mon Aug 27 04:22:01 2012] Source does appear to be extended [Mon Aug 27 04:22:01 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Mon Aug 27 04:22:21 2012] XMMSAS src. selection expression = ellipse(27095.080000, 24990.370000, 825.258024, 825.258024, 0.000000, X, Y) [Mon Aug 27 04:22:21 2012] Writing source region out to fullrun_pn_xmm0110000201_pi300-10000_pass1_cl_src11_src.reg [Mon Aug 27 04:22:21 2012] Extracting stamp from image fullrun_pn_xmm0110000201_pi300-10000_cl_sm2.00.img.gz, (265, 240) - (359, 335) [Mon Aug 27 04:22:21 2012] XMMSAS bgd. selection expression = annulus(27095.080000, 24990.370000, 1375.430040, 2750.860079, X, Y) && !ellipse(28424.323578, 24826.788086, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27761.060800, 25401.319000, 492.303214, 393.339211, 343.571000, X, Y) && !ellipse(27790.966000, 25655.774000, 1139.448033, 1139.448033, 0.000000, X, Y) && !ellipse(28968.636444, 25414.377930, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29773.150146, 24545.471802, 870.000000, 870.000000, 0.000000, X, Y) [Mon Aug 27 04:22:21 2012] Writing fullrun_pn_xmm0110000201_pi300-10000_pass1_cl_src11.gif [Mon Aug 27 04:35:57 2012] Mean detx,y = (136.45, 394.82) [Mon Aug 27 04:35:59 2012] Setting backscal keywords in source and bgd. spectrum [Mon Aug 27 04:36:29 2012] grppha failed [Mon Aug 27 04:36:30 2012] Setting source spectrum file to fullrun_pn_xmm0110000201_pi300-10000_pass1_cl_src11_src.pi.gz [Mon Aug 27 04:36:30 2012] Setting bgd. spectrum file to fullrun_pn_xmm0110000201_pi300-10000_pass1_cl_src11_bgd.pi.gz [Mon Aug 27 05:08:27 2012] Updating aperture counts using extracted products [Mon Aug 27 05:08:27 2012] Error reading totcts from fullrun_pn_xmm0110000201_pi300-10000_pass1_cl_src11_src.pi.gz [Mon Aug 27 05:08:27 2012] No arf file for this source, not re-computing flux [Mon Aug 27 05:08:31 2012] Flag c found in src. 11 procflags, skipping spectral fitting [Mon Aug 27 05:08:31 2012] Source 11 has no response, skipping [Mon Aug 27 05:08:32 2012] xmm0110000201/analysis//spectral/fullrun_pn_xmm0110000201_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete