[Sun Aug 26 23:10:36 2012] Detection parameters:
  Position = (482.3, 261.9) = 0 56 52.17 -72 12 3.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 35.0 +/- 8.3
  Background counts = 8.3
  Rate = 0.002 +/- 0.0004

[Sun Aug 26 23:10:36 2012] Off-axis axis estimate = 13.59'
[Sun Aug 26 23:47:52 2012] Using EEF radius (= 13.22 ")to estimate initial spatial extent for simple fitting
[Sun Aug 26 23:47:52 2012] Initial guess for spatial extent in simple fitting = 13.22"
[Sun Aug 26 23:47:52 2012] source mask rpix=3.0, npix_max = 50, mask sum = 49, frac = 0.978
[Sun Aug 26 23:47:52 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 13.22"
[Mon Aug 27 00:39:47 2012] fullrun_mos1_xmm0110000201_pi300-10000_cl_pass0_src29.ximg exists
[Mon Aug 27 00:39:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110000201_pi300-10000_cl_pass0_src29.csv
[Mon Aug 27 00:39:47 2012] fullrun_mos1_xmm0110000201_pi300-10000_cl_pass0_src29_1.ximg exists
[Mon Aug 27 00:39:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110000201_pi300-10000_cl_pass0_src29.csv
[Mon Aug 27 00:39:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110000201_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110000201_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 27 00:39:47 2012] fullrun_mos1_xmm0110000201_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Mon Aug 27 00:39:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110000201_pi300-10000_cl_pass0_tfrozen_src29.csv
[Mon Aug 27 00:39:47 2012] fullrun_mos1_xmm0110000201_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Mon Aug 27 00:39:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110000201_pi300-10000_cl_pass0_tfrozen_src29.csv
[Mon Aug 27 00:39:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110000201_pi300-10000_cl_pass0_tfrozen_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110000201_pi300-10000_cl_pass0_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 27 01:37:41 2012] Warning: source 29 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 21 at 17.782739 pixels away
[Mon Aug 27 01:37:41 2012] Vigneting correction estimate = 1.000000
[Mon Aug 27 01:37:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 27 01:37:41 2012] Assessing source extent using major
[Mon Aug 27 01:37:41 2012] Source does appear to be extended
[Mon Aug 27 01:37:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 27 02:20:41 2012] Using EEF radius (= 13.22 ")to estimate initial spatial extent for simple fitting
[Mon Aug 27 02:20:41 2012] Initial guess for spatial extent in simple fitting = 13.22"
[Mon Aug 27 02:20:41 2012] source mask rpix=3.0, npix_max = 50, mask sum = 49, frac = 0.978
[Mon Aug 27 02:20:41 2012] Giving source the simple spatial ID 29 for pass 1, mean size = 13.22"
[Mon Aug 27 03:21:03 2012] fullrun_mos1_xmm0110000201_pi300-10000_cl_pass1_src29.ximg exists
[Mon Aug 27 03:21:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110000201_pi300-10000_cl_pass1_src29.csv
[Mon Aug 27 03:21:03 2012] fullrun_mos1_xmm0110000201_pi300-10000_cl_pass1_src29_1.ximg exists
[Mon Aug 27 03:21:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110000201_pi300-10000_cl_pass1_src29.csv
[Mon Aug 27 03:21:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110000201_pi300-10000_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110000201_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 27 03:21:03 2012] fullrun_mos1_xmm0110000201_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Mon Aug 27 03:21:03 2012] fullrun_mos1_xmm0110000201_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Mon Aug 27 03:21:03 2012] Fit fullrun_mos1_xmm0110000201_pi300-10000_cl_pass1_tfrozen_src29 appears to have run properly
[Mon Aug 27 04:22:06 2012] Spatial fit model total counts = 144.803000, observed total counts = 142.000000
[Mon Aug 27 04:22:06 2012] Offset between fit and detection position for source 21 = 3.774540 pixels
[Mon Aug 27 04:22:06 2012] 151.623820 total counts/ 7.540820 bgd. counts: snr = 52.469081
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 3.774540 pixels
  Position = (478.9, 260.2) = 0 56 55.35 -72 12 11.6
  Extent = 26.4 (26.4-52.9)", rotation angle = 0
  Source counts = 144.1 +/- 12.3
  Background counts = 7.5
  Rate = 0.007 +/- 0.0006
[Mon Aug 27 04:22:06 2012] Vigneting correction estimate = 1.000000
[Mon Aug 27 04:22:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 27 04:22:06 2012] Assessing source extent using major axis lower bound
[Mon Aug 27 04:22:06 2012] Source does appear to be extended
[Mon Aug 27 04:22:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 27 04:46:32 2012] XMMSAS src. selection expression = ellipse(41616.988000, 22586.962000, 1586.754046, 1586.754046, 0.000000, X, Y)
[Mon Aug 27 04:46:32 2012] Writing source region out to fullrun_mos1_xmm0110000201_pi300-10000_pass1_cl_src21_src.reg
[Mon Aug 27 04:46:32 2012] Extracting stamp from image fullrun_mos1_xmm0110000201_pi300-10000_cl_sm2.00.img.gz, (388, 169) - (570, 351)
[Mon Aug 27 04:46:32 2012] XMMSAS bgd. selection expression = annulus(41616.988000, 22586.962000, 2644.590076, 5289.180152, X, Y) && !ellipse(36590.224697, 27704.986500, 664.943530, 485.609487, 73.992869, X, Y) && !ellipse(38189.593018, 21549.600464, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Aug 27 04:46:32 2012] Writing fullrun_mos1_xmm0110000201_pi300-10000_pass1_cl_src21.gif
[Mon Aug 27 05:00:03 2012] Mean detx,y = (13005.07, 5422.04) 
[Mon Aug 27 05:00:04 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Aug 27 05:00:52 2012] grppha failed
[Mon Aug 27 05:00:52 2012] Setting source spectrum file to fullrun_mos1_xmm0110000201_pi300-10000_pass1_cl_src21_src.pi.gz
[Mon Aug 27 05:00:52 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0110000201_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Mon Aug 27 05:08:27 2012] Updating aperture counts using extracted products
[Mon Aug 27 05:08:27 2012] Error reading totcts from fullrun_mos1_xmm0110000201_pi300-10000_pass1_cl_src21_src.pi.gz
[Mon Aug 27 05:08:27 2012] No arf file for this source, not re-computing flux
[Mon Aug 27 05:08:29 2012] Source 21 has no response, skipping
[Mon Aug 27 05:08:30 2012] xmm0110000201/analysis//spectral/fullrun_mos1_xmm0110000201_pi300-10000_pass1_cl_src21_pl.csv not found, spectral fit skipped or did not complete