[Sun Aug 26 23:10:36 2012] Detection parameters: Position = (314.9, 284.1) = 0 59 30.99 -72 10 31.4 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 202.8 +/- 19.0 Background counts = 12.8 Rate = 0.01 +/- 0.001 [Sun Aug 26 23:10:36 2012] Off-axis axis estimate = 1.58' [Sun Aug 26 23:47:52 2012] Using EEF radius (= 7.22 ")to estimate initial spatial extent for simple fitting [Sun Aug 26 23:47:52 2012] Initial guess for spatial extent in simple fitting = 7.22" [Sun Aug 26 23:47:52 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.857 [Sun Aug 26 23:47:52 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 7.22" [Mon Aug 27 00:39:47 2012] fullrun_mos1_xmm0110000201_pi300-10000_cl_pass0_src9.ximg exists [Mon Aug 27 00:39:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110000201_pi300-10000_cl_pass0_src9.csv [Mon Aug 27 00:39:47 2012] fullrun_mos1_xmm0110000201_pi300-10000_cl_pass0_src9_1.ximg exists [Mon Aug 27 00:39:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110000201_pi300-10000_cl_pass0_src9.csv [Mon Aug 27 00:39:47 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0110000201_pi300-10000_cl_pass0_src9_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0110000201_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon Aug 27 00:39:47 2012] fullrun_mos1_xmm0110000201_pi300-10000_cl_pass0_tfrozen_src9.ximg exists [Mon Aug 27 00:39:47 2012] fullrun_mos1_xmm0110000201_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists [Mon Aug 27 00:39:47 2012] Fit fullrun_mos1_xmm0110000201_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly [Mon Aug 27 01:37:41 2012] Warning, spatial fit 9 centroid is now closest to src. 15 [Mon Aug 27 01:37:41 2012] Vigneting correction estimate = 1.000000 [Mon Aug 27 01:37:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon Aug 27 01:37:41 2012] Assessing source extent using major [Mon Aug 27 01:37:41 2012] Source does appear to be extended [Mon Aug 27 01:37:41 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Mon Aug 27 01:37:41 2012] Source is confused with source 14 [Mon Aug 27 02:20:41 2012] Using EEF radius (= 7.22 ")to estimate initial spatial extent for simple fitting [Mon Aug 27 02:20:41 2012] Initial guess for spatial extent in simple fitting = 7.22" [Mon Aug 27 02:20:41 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.857 [Mon Aug 27 02:20:41 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 7.22" [Mon Aug 27 03:21:02 2012] fullrun_mos1_xmm0110000201_pi300-10000_cl_pass1_src9.ximg exists [Mon Aug 27 03:21:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110000201_pi300-10000_cl_pass1_src9.csv [Mon Aug 27 03:21:02 2012] fullrun_mos1_xmm0110000201_pi300-10000_cl_pass1_src9_1.ximg exists [Mon Aug 27 03:21:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110000201_pi300-10000_cl_pass1_src9.csv [Mon Aug 27 03:21:02 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0110000201_pi300-10000_cl_pass1_src9_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0110000201_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon Aug 27 03:21:03 2012] fullrun_mos1_xmm0110000201_pi300-10000_cl_pass1_tfrozen_src9.ximg exists [Mon Aug 27 03:21:03 2012] fullrun_mos1_xmm0110000201_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists [Mon Aug 27 03:21:03 2012] Fit fullrun_mos1_xmm0110000201_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly [Mon Aug 27 04:22:06 2012] Warning, spatial fit 9 centroid is now closest to src. 15 [Mon Aug 27 04:22:06 2012] Source 17 is offset by -4.747071 and -7.892940 pixels which is larger than 2 X fitted extent = 5.495402 x 0.869200, not incorporating fit results [Mon Aug 27 04:22:06 2012] Spatial fit model total counts = 1766.480000, observed total counts = 1769.000000 [Mon Aug 27 04:22:06 2012] Offset between fit and detection position for source 17 = 4.868426 pixels [Mon Aug 27 04:22:06 2012] Warning, changing simple spatial fit ID from 9 to 13 [Mon Aug 27 04:22:06 2012] 1665.470900 total counts/ 20.540900 bgd. counts: snr = 362.942384 Spatial fit parameters: Offset between fit and detection position for source 17 = 4.868426 pixels Position = (317.8, 288.0) = 0 59 28.25 -72 10 15.3 Extent = 34.1 (31.1-37.2)", rotation angle = 0 Source counts = 1644.9 +/- 40.8 Background counts = 20.5 Rate = 0.08 +/- 0.002 [Mon Aug 27 04:22:06 2012] Vigneting correction estimate = 1.000000 [Mon Aug 27 04:22:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon Aug 27 04:22:06 2012] Assessing source extent using major axis lower bound [Mon Aug 27 04:22:06 2012] Source does appear to be extended [Mon Aug 27 04:22:06 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Mon Aug 27 04:46:32 2012] Counts = 1644.930000, rescaling region sizes by 2.000000 [Mon Aug 27 04:46:32 2012] XMMSAS src. selection expression = ellipse(27599.806000, 25004.980000, 4087.188118, 4087.188118, 0.000000, X, Y) [Mon Aug 27 04:46:32 2012] Writing source region out to fullrun_mos1_xmm0110000201_pi300-10000_pass1_cl_src17_src.reg [Mon Aug 27 04:46:32 2012] Extracting stamp from image fullrun_mos1_xmm0110000201_pi300-10000_cl_sm2.00.img.gz, (83, 53) - (553, 523) [Mon Aug 27 04:46:32 2012] XMMSAS bgd. selection expression = annulus(27599.806000, 25004.980000, 13623.960392, 27247.920784, X, Y) && !ellipse(36590.224697, 27704.986500, 664.943530, 485.609487, 73.992869, X, Y) && !ellipse(20716.557846, 23390.855264, 515.354032, 420.003631, 84.825147, X, Y) && !ellipse(17259.819500, 23664.207237, 538.111251, 359.225014, 83.572561, X, Y) && !ellipse(28242.465300, 9330.017000, 613.050418, 295.586409, 359.658040, X, Y) && !ellipse(36730.139343, 34073.907318, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27722.224000, 25324.162000, 382.384811, 382.384811, 0.000000, X, Y) && !ellipse(34082.514923, 15526.257629, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38189.593018, 21549.600464, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23228.532000, 31631.372200, 585.972817, 585.972817, 0.000000, X, Y) && !ellipse(28812.216000, 24977.179200, 1016.024029, 1016.024029, 0.000000, X, Y) && !ellipse(28333.216248, 24668.556305, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26914.498200, 25335.084000, 1088.008031, 1088.008031, 0.000000, X, Y) && !ellipse(26982.435400, 34649.633960, 450.581613, 450.581613, 0.000000, X, Y) && !ellipse(15623.192780, 32059.293000, 528.169615, 528.169615, 0.000000, X, Y) && !ellipse(23555.848640, 13000.958400, 507.769921, 507.769921, 0.000000, X, Y) && !ellipse(28804.919373, 10227.309669, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29865.036160, 22393.380200, 320.492621, 320.492621, 0.000000, X, Y) && !ellipse(30052.976316, 21051.842600, 484.208014, 484.208014, 0.000000, X, Y) && !ellipse(24122.838928, 40435.532745, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26804.195496, 25843.778473, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32901.691200, 26788.979200, 342.825610, 342.825610, 0.000000, X, Y) && !ellipse(37784.414307, 13725.320724, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28904.435620, 17655.991000, 628.665618, 628.665618, 0.000000, X, Y) && !ellipse(22541.242800, 23445.596800, 536.075215, 536.075215, 0.000000, X, Y) && !ellipse(27463.099426, 26130.173828, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33282.512115, 31223.489105, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18861.533200, 28849.113000, 404.720812, 404.720812, 0.000000, X, Y) && !ellipse(41616.988000, 22586.962000, 2115.672061, 2115.672061, 0.000000, X, Y) && !ellipse(19448.671799, 10269.385246, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20045.594070, 32661.147644, 870.000000, 870.000000, 0.000000, X, Y) [Mon Aug 27 04:46:32 2012] Writing fullrun_mos1_xmm0110000201_pi300-10000_pass1_cl_src17.gif [Mon Aug 27 04:48:18 2012] Mean detx,y = (122.96, -68.10) [Mon Aug 27 04:48:19 2012] Setting backscal keywords in source and bgd. spectrum [Mon Aug 27 04:55:39 2012] grppha failed [Mon Aug 27 04:55:39 2012] Setting source spectrum file to fullrun_mos1_xmm0110000201_pi300-10000_pass1_cl_src17_src.pi.gz [Mon Aug 27 04:55:39 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0110000201_pi300-10000_pass1_cl_src17_bgd.pi.gz [Mon Aug 27 05:08:27 2012] Updating aperture counts using extracted products [Mon Aug 27 05:08:27 2012] Error reading totcts from fullrun_mos1_xmm0110000201_pi300-10000_pass1_cl_src17_src.pi.gz [Mon Aug 27 05:08:27 2012] No arf file for this source, not re-computing flux [Mon Aug 27 05:08:29 2012] Flag b found in src. 17 procflags, skipping spectral fitting [Mon Aug 27 05:08:29 2012] Flag c found in src. 17 procflags, skipping spectral fitting [Mon Aug 27 05:08:29 2012] Source 17 has no response, skipping [Mon Aug 27 05:08:30 2012] xmm0110000201/analysis//spectral/fullrun_mos1_xmm0110000201_pi300-10000_pass1_cl_src17_pl.csv not found, spectral fit skipped or did not complete