[Sun Aug 26 23:10:36 2012] Detection parameters:
  Position = (331.2, 288.0) = 0 59 15.51 -72 10 15.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 161.5 +/- 17.6
  Background counts = 13.0
  Rate = 0.008 +/- 0.0009

[Sun Aug 26 23:10:36 2012] Off-axis axis estimate = 2.50'
[Sun Aug 26 23:47:52 2012] Using EEF radius (= 7.68 ")to estimate initial spatial extent for simple fitting
[Sun Aug 26 23:47:52 2012] Initial guess for spatial extent in simple fitting = 7.68"
[Sun Aug 26 23:47:52 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.975
[Sun Aug 26 23:47:52 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 7.68"
[Mon Aug 27 00:39:47 2012] fullrun_mos1_xmm0110000201_pi300-10000_cl_pass0_src11.ximg exists
[Mon Aug 27 00:39:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110000201_pi300-10000_cl_pass0_src11.csv
[Mon Aug 27 00:39:47 2012] fullrun_mos1_xmm0110000201_pi300-10000_cl_pass0_src11_1.ximg exists
[Mon Aug 27 00:39:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110000201_pi300-10000_cl_pass0_src11.csv
[Mon Aug 27 00:39:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110000201_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110000201_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 27 00:39:47 2012] fullrun_mos1_xmm0110000201_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Mon Aug 27 00:39:47 2012] fullrun_mos1_xmm0110000201_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Mon Aug 27 00:39:47 2012] Fit fullrun_mos1_xmm0110000201_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Mon Aug 27 01:37:41 2012] Spatial fit model total counts = 734.267000, observed total counts = 736.000000
[Mon Aug 27 01:37:41 2012] Offset between fit and detection position for source 16 = 0.602865 pixels
[Mon Aug 27 01:37:41 2012] 682.984000 total counts/ 537.938000 bgd. counts: snr = 6.253737
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.602865 pixels
  Position = (331.7, 287.7) = 0 59 15.05 -72 10 16.6
  Extent = 12.7 (9.1-15.4)", rotation angle = 0
  Source counts = 145.0 +/- 26.1
  Background counts = 537.9
  Rate = 0.007 +/- 0.001
[Mon Aug 27 01:37:41 2012] Vigneting correction estimate = 1.000000
[Mon Aug 27 01:37:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 27 01:37:41 2012] Assessing source extent using major axis lower bound
[Mon Aug 27 01:37:41 2012] Source does appear to be extended
[Mon Aug 27 01:37:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 27 01:37:41 2012] Source is confused with source 18
[Mon Aug 27 02:20:41 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Aug 27 02:20:41 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Aug 27 02:20:41 2012] Initial guess for spatial extent in simple fitting = 12.70"
[Mon Aug 27 02:20:41 2012] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.048
[Mon Aug 27 02:20:41 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 12.70"
[Mon Aug 27 03:21:02 2012] fullrun_mos1_xmm0110000201_pi300-10000_cl_pass1_src11.ximg exists
[Mon Aug 27 03:21:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110000201_pi300-10000_cl_pass1_src11.csv
[Mon Aug 27 03:21:02 2012] fullrun_mos1_xmm0110000201_pi300-10000_cl_pass1_src11_1.ximg exists
[Mon Aug 27 03:21:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110000201_pi300-10000_cl_pass1_src11.csv
[Mon Aug 27 03:21:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110000201_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110000201_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 27 03:21:03 2012] fullrun_mos1_xmm0110000201_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Mon Aug 27 03:21:03 2012] fullrun_mos1_xmm0110000201_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Mon Aug 27 03:21:03 2012] Fit fullrun_mos1_xmm0110000201_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Mon Aug 27 04:22:06 2012] Warning, spatial fit 11 centroid is now closest to src. 18
[Mon Aug 27 04:22:06 2012] Vigneting correction estimate = 1.000000
[Mon Aug 27 04:22:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 27 04:22:06 2012] Assessing source extent using major axis lower bound
[Mon Aug 27 04:22:06 2012] Source does appear to be extended
[Mon Aug 27 04:22:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 27 04:46:32 2012] XMMSAS src. selection expression = ellipse(28812.216000, 24977.179200, 762.018022, 762.018022, 0.000000, X, Y)
[Mon Aug 27 04:46:32 2012] Writing source region out to fullrun_mos1_xmm0110000201_pi300-10000_pass1_cl_src16_src.reg
[Mon Aug 27 04:46:32 2012] Extracting stamp from image fullrun_mos1_xmm0110000201_pi300-10000_cl_sm2.00.img.gz, (288, 244) - (376, 331)
[Mon Aug 27 04:46:32 2012] XMMSAS bgd. selection expression = annulus(28812.216000, 24977.179200, 1270.030037, 2540.060073, X, Y) && !ellipse(27722.224000, 25324.162000, 382.384811, 382.384811, 0.000000, X, Y) && !ellipse(27599.806000, 25004.980000, 2724.792078, 2724.792078, 0.000000, X, Y) && !ellipse(28333.216248, 24668.556305, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26914.498200, 25335.084000, 1088.008031, 1088.008031, 0.000000, X, Y) && !ellipse(29865.036160, 22393.380200, 320.492621, 320.492621, 0.000000, X, Y) && !ellipse(26804.195496, 25843.778473, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27463.099426, 26130.173828, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Aug 27 04:46:32 2012] Writing fullrun_mos1_xmm0110000201_pi300-10000_pass1_cl_src16.gif
[Mon Aug 27 04:55:56 2012] Mean detx,y = (1019.15, 196.51) 
[Mon Aug 27 04:55:57 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Aug 27 04:56:06 2012] grppha failed
[Mon Aug 27 04:56:06 2012] Setting source spectrum file to fullrun_mos1_xmm0110000201_pi300-10000_pass1_cl_src16_src.pi.gz
[Mon Aug 27 04:56:06 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0110000201_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Mon Aug 27 05:08:27 2012] Updating aperture counts using extracted products
[Mon Aug 27 05:08:27 2012] Error reading totcts from fullrun_mos1_xmm0110000201_pi300-10000_pass1_cl_src16_src.pi.gz
[Mon Aug 27 05:08:27 2012] No arf file for this source, not re-computing flux
[Mon Aug 27 05:08:29 2012] Flag c found in src. 16 procflags, skipping spectral fitting
[Mon Aug 27 05:08:29 2012] Source 16 has no response, skipping
[Mon Aug 27 05:08:30 2012] xmm0110000201/analysis//spectral/fullrun_mos1_xmm0110000201_pi300-10000_pass1_cl_src16_pl.csv not found, spectral fit skipped or did not complete