[Mon Jul 23 06:14:12 2012] Detection parameters:
  Position = (203.9, 184.0) = 0 51 3.19 -73 21 32.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1424.8 +/- 47.6
  Background counts = 42.6
  Rate = 0.06 +/- 0.002

[Mon Jul 23 06:14:13 2012] Off-axis axis estimate = 10.76'
[Mon Jul 23 06:17:55 2012] Using EEF radius (= 11.81 ")to estimate initial spatial extent for simple fitting
[Mon Jul 23 06:17:55 2012] Initial guess for spatial extent in simple fitting = 11.81"
[Mon Jul 23 06:17:55 2012] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.871
[Mon Jul 23 06:17:55 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 11.81"
[Mon Jul 23 07:51:27 2012] fullrun_pn_xmm0110000101_pi300-10000_cl_pass0_src3.ximg exists
[Mon Jul 23 07:51:27 2012] fullrun_pn_xmm0110000101_pi300-10000_cl_pass0_src3_1.ximg exists
[Mon Jul 23 07:51:27 2012] Fit fullrun_pn_xmm0110000101_pi300-10000_cl_pass0_src3 appears to have run properly
[Mon Jul 23 07:51:27 2012] fullrun_pn_xmm0110000101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Mon Jul 23 07:51:27 2012] fullrun_pn_xmm0110000101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Mon Jul 23 07:51:27 2012] Fit fullrun_pn_xmm0110000101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Mon Jul 23 11:57:09 2012] Spatial fit model total counts = 5226.720000, observed total counts = 4827.000000
[Mon Jul 23 11:57:09 2012] Offset between fit and detection position for source 3 = 2.387304 pixels
[Mon Jul 23 11:57:09 2012] 5187.650000 total counts/ 1786.120000 bgd. counts: snr = 80.485749
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 2.387304 pixels
  Position = (201.7, 184.8) = 0 51 5.48 -73 21 30.2
  Extent = 23.6 (23.6-47.2)", rotation angle = 0
  Source counts = 3401.5 +/- 72.0
  Background counts = 1786.1
  Rate = 0.2 +/- 0.003
[Mon Jul 23 11:57:10 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 11:57:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 11:57:10 2012] Assessing source extent using major axis lower bound
[Mon Jul 23 11:57:10 2012] Source does appear to be extended
[Mon Jul 23 11:57:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 23 11:57:10 2012] Source is confused with source 2
[Mon Jul 23 11:57:36 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jul 23 11:57:36 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jul 23 11:57:36 2012] Initial guess for spatial extent in simple fitting = 23.61"
[Mon Jul 23 11:57:36 2012] source mask rpix=5.4, npix_max = 140, mask sum = 143, frac = 1.017
[Mon Jul 23 11:57:36 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 23.61"
[Mon Jul 23 13:36:26 2012] fullrun_pn_xmm0110000101_pi300-10000_cl_pass1_src3.ximg exists
[Mon Jul 23 13:36:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110000101_pi300-10000_cl_pass1_src3.csv
[Mon Jul 23 13:36:26 2012] fullrun_pn_xmm0110000101_pi300-10000_cl_pass1_src3_1.ximg exists
[Mon Jul 23 13:36:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110000101_pi300-10000_cl_pass1_src3.csv
[Mon Jul 23 13:36:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110000101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110000101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 13:36:27 2012] fullrun_pn_xmm0110000101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Mon Jul 23 13:36:27 2012] fullrun_pn_xmm0110000101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Mon Jul 23 13:36:27 2012] Fit fullrun_pn_xmm0110000101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Mon Jul 23 18:52:27 2012] Spatial fit model total counts = 5006.030000, observed total counts = 5004.000000
[Mon Jul 23 18:52:27 2012] Offset between fit and detection position for source 3 = 0.978122 pixels
[Mon Jul 23 18:52:27 2012] Warning, changing simple spatial fit ID from 3 to 2
[Mon Jul 23 18:52:27 2012] 5028.540000 total counts/ 1825.570000 bgd. counts: snr = 74.964151
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.978122 pixels
  Position = (200.7, 184.7) = 0 51 6.46 -73 21 30.7
  Extent = 23.8 (23.7-47.5)", rotation angle = 0
  Source counts = 3203.0 +/- 70.9
  Background counts = 1825.6
  Rate = 0.1 +/- 0.003
[Mon Jul 23 18:52:27 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 18:52:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 18:52:27 2012] Assessing source extent using major axis lower bound
[Mon Jul 23 18:52:27 2012] Source does appear to be extended
[Mon Jul 23 18:52:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 23 18:52:54 2012] Counts = 3202.970000, rescaling region sizes by 2.000000
[Mon Jul 23 18:52:54 2012] XMMSAS src. selection expression = ellipse(17411.388000, 16017.518000, 2850.324082, 2850.324082, 0.000000, X, Y)
[Mon Jul 23 18:52:54 2012] Writing source region out to fullrun_pn_xmm0110000101_pi300-10000_pass1_cl_src3_src.reg
[Mon Jul 23 18:52:54 2012] Extracting stamp from image fullrun_pn_xmm0110000101_pi300-10000_cl_sm2.00.img.gz, (37, 21) - (365, 348)
[Mon Jul 23 18:52:54 2012] XMMSAS bgd. selection expression = annulus(17411.388000, 16017.518000, 9501.080273, 19002.160547, X, Y) && !ellipse(36642.649200, 26882.782400, 462.183213, 462.183213, 0.000000, X, Y) && !ellipse(17146.732193, 16217.232986, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24628.165344, 13975.993988, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13334.293380, 29141.203600, 513.692815, 513.692815, 0.000000, X, Y) && !ellipse(27107.067963, 27905.801666, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19226.050000, 22529.138400, 495.185614, 495.185614, 0.000000, X, Y) && !ellipse(18097.024261, 29697.449951, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28799.234380, 11919.508800, 470.492014, 470.492014, 0.000000, X, Y) && !ellipse(35921.364000, 30610.670000, 1836.464053, 1836.464053, 0.000000, X, Y) && !ellipse(34858.844000, 30305.057600, 1711.128049, 1711.128049, 0.000000, X, Y) && !ellipse(27489.965000, 24876.328000, 1154.504033, 1154.504033, 0.000000, X, Y) && !ellipse(31788.134186, 16656.086761, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16143.316971, 15707.841721, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17412.397079, 14966.943848, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23852.193207, 11852.334290, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36597.321503, 31699.416382, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37317.386000, 31725.604000, 1829.800053, 1829.800053, 0.000000, X, Y) && !ellipse(36861.308411, 31115.822357, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31623.575470, 25727.297028, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26463.326000, 23531.134000, 1836.464053, 1742.448050, 314.556000, X, Y) && !ellipse(27912.150600, 24213.672800, 1218.344035, 808.472023, 259.152000, X, Y) && !ellipse(31100.107239, 18401.408768, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24101.418152, 15246.977753, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30569.021729, 13197.175659, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27559.386719, 23380.811340, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27320.574799, 21118.030762, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul 23 18:52:54 2012] Writing fullrun_pn_xmm0110000101_pi300-10000_pass1_cl_src3.gif
[Mon Jul 23 18:57:24 2012] Mean detx,y = (6796.16, 11748.75) 
[Mon Jul 23 18:57:28 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 23 19:03:50 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 23 19:03:51 2012] Setting source spectrum file to fullrun_pn_xmm0110000101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon Jul 23 19:03:51 2012] Setting bgd. spectrum file to fullrun_pn_xmm0110000101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Mon Jul 23 23:07:48 2012] Updating aperture counts using extracted products
[Mon Jul 23 23:07:48 2012] Error reading totcts from fullrun_pn_xmm0110000101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon Jul 23 23:07:48 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 23 23:07:48 2012] Using photon index=1.80, rate=0.15, arf fullrun_pn_xmm0110000101_pi300-10000_pass1_cl_src3.arf
[Mon Jul 23 23:07:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 23 23:07:48 2012] Updating source flux to 6.9e-13
[Mon Jul 23 23:15:57 2012] Flag c found in src. 3 procflags, skipping spectral fitting