[Mon Jul 23 06:14:12 2012] Detection parameters:
  Position = (422.0, 309.3) = 0 47 23.48 -73 12 26.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 5991.1 +/- 92.8
  Background counts = 36.1
  Rate = 0.5 +/- 0.007

[Mon Jul 23 06:14:13 2012] Off-axis axis estimate = 8.99'
[Mon Jul 23 06:17:55 2012] Using EEF radius (= 10.92 ")to estimate initial spatial extent for simple fitting
[Mon Jul 23 06:17:55 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jul 23 06:17:55 2012] Initial guess for spatial extent in simple fitting = 10.92"
[Mon Jul 23 06:17:55 2012] source mask rpix=2.5, npix_max = 36, mask sum = 33, frac = 0.910
[Mon Jul 23 06:17:55 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.92"
[Mon Jul 23 07:51:27 2012] fullrun_pn_xmm0110000101_pi300-10000_cl_pass0_src1.ximg exists
[Mon Jul 23 07:51:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110000101_pi300-10000_cl_pass0_src1.csv
[Mon Jul 23 07:51:27 2012] fullrun_pn_xmm0110000101_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Jul 23 07:51:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110000101_pi300-10000_cl_pass0_src1.csv
[Mon Jul 23 07:51:27 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110000101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110000101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 07:51:27 2012] fullrun_pn_xmm0110000101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Jul 23 07:51:27 2012] fullrun_pn_xmm0110000101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Jul 23 07:51:27 2012] Fit fullrun_pn_xmm0110000101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Jul 23 11:57:09 2012] Spatial fit model total counts = 5749.540000, observed total counts = 5600.000000
[Mon Jul 23 11:57:09 2012] Offset between fit and detection position for source 1 = 0.372013 pixels
[Mon Jul 23 11:57:09 2012] 5729.360000 total counts/ 1421.840000 bgd. counts: snr = 114.235724
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.372013 pixels
  Position = (421.7, 309.6) = 0 47 23.73 -73 12 26.6
  Extent = 6.1 (6.0-6.3)", rotation angle = 0
  Source counts = 4307.5 +/- 75.7
  Background counts = 1421.8
  Rate = 0.2 +/- 0.004
[Mon Jul 23 11:57:10 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 11:57:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 11:57:10 2012] Assessing source extent using major axis lower bound
[Mon Jul 23 11:57:10 2012] Source does appear to be extended
[Mon Jul 23 11:57:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 23 11:57:36 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jul 23 11:57:36 2012] Initial guess for spatial extent in simple fitting = 6.09"
[Mon Jul 23 11:57:36 2012] source mask rpix=1.4, npix_max = 14, mask sum = 12, frac = 0.832
[Mon Jul 23 11:57:36 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.09"
[Mon Jul 23 13:36:26 2012] fullrun_pn_xmm0110000101_pi300-10000_cl_pass1_src1.ximg exists
[Mon Jul 23 13:36:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110000101_pi300-10000_cl_pass1_src1.csv
[Mon Jul 23 13:36:26 2012] fullrun_pn_xmm0110000101_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Jul 23 13:36:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0110000101_pi300-10000_cl_pass1_src1.csv
[Mon Jul 23 13:36:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0110000101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0110000101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 13:36:27 2012] fullrun_pn_xmm0110000101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Jul 23 13:36:27 2012] fullrun_pn_xmm0110000101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Jul 23 13:36:27 2012] Fit fullrun_pn_xmm0110000101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Jul 23 18:52:27 2012] Spatial fit model total counts = 5446.110000, observed total counts = 5257.000000
[Mon Jul 23 18:52:27 2012] Offset between fit and detection position for source 1 = 0.022208 pixels
[Mon Jul 23 18:52:27 2012] 5417.890000 total counts/ 1284.890000 bgd. counts: snr = 115.300829
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.022208 pixels
  Position = (421.7, 309.6) = 0 47 23.71 -73 12 26.6
  Extent = 5.8 (5.6-6.0)", rotation angle = 0
  Source counts = 4133.0 +/- 73.6
  Background counts = 1284.9
  Rate = 0.2 +/- 0.003
[Mon Jul 23 18:52:27 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 18:52:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 18:52:27 2012] Assessing source extent using major axis lower bound
[Mon Jul 23 18:52:27 2012] Source does appear to be extended
[Mon Jul 23 18:52:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 23 18:52:54 2012] Counts = 4133.000000, rescaling region sizes by 2.000000
[Mon Jul 23 18:52:54 2012] XMMSAS src. selection expression = ellipse(36642.649200, 26882.782400, 693.274820, 693.274820, 0.000000, X, Y)
[Mon Jul 23 18:52:54 2012] Writing source region out to fullrun_pn_xmm0110000101_pi300-10000_pass1_cl_src1_src.reg
[Mon Jul 23 18:52:54 2012] Extracting stamp from image fullrun_pn_xmm0110000101_pi300-10000_cl_sm2.00.img.gz, (382, 270) - (462, 349)
[Mon Jul 23 18:52:54 2012] XMMSAS bgd. selection expression = annulus(36642.649200, 26882.782400, 2310.916066, 4621.832133, X, Y) && !ellipse(40962.842600, 31185.292000, 1931.424056, 1931.424056, 0.000000, X, Y) && !ellipse(35921.364000, 30610.670000, 1836.464053, 1836.464053, 0.000000, X, Y) && !ellipse(34858.844000, 30305.057600, 1711.128049, 1711.128049, 0.000000, X, Y) && !ellipse(41667.994690, 31888.884583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41157.912000, 31433.484000, 1692.800049, 1692.800049, 0.000000, X, Y) && !ellipse(36597.321503, 31699.416382, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37317.386000, 31725.604000, 1829.800053, 1829.800053, 0.000000, X, Y) && !ellipse(36861.308411, 31115.822357, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31623.575470, 25727.297028, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul 23 18:52:54 2012] Writing fullrun_pn_xmm0110000101_pi300-10000_pass1_cl_src1.gif
[Mon Jul 23 18:53:12 2012] Mean detx,y = (120.78, -9223.32) 
[Mon Jul 23 18:53:14 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 23 18:54:26 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 23 18:54:27 2012] Setting source spectrum file to fullrun_pn_xmm0110000101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Jul 23 18:54:27 2012] Setting bgd. spectrum file to fullrun_pn_xmm0110000101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Jul 23 23:07:48 2012] Updating aperture counts using extracted products
[Mon Jul 23 23:07:48 2012] Error reading totcts from fullrun_pn_xmm0110000101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Jul 23 23:07:48 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 23 23:07:48 2012] Using photon index=1.80, rate=0.193, arf fullrun_pn_xmm0110000101_pi300-10000_pass1_cl_src1.arf
[Mon Jul 23 23:07:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 23 23:07:48 2012] Updating source flux to 8.8e-13
[Mon Jul 23 23:20:27 2012] Reading fit data from xmm0110000101/analysis//spectral/fullrun_pn_xmm0110000101_pi300-10000_pass1_cl_src1_pl.csv
[Mon Jul 23 23:20:27 2012] Spectral fit parameter nH value = 2.55105e+21
[Mon Jul 23 23:20:27 2012] Spectral fit parameter PhoIndex value = 0.814377
[Mon Jul 23 23:20:27 2012] Failed to get F(0.3-8.0) from xmm0110000101/analysis//spectral/fullrun_pn_xmm0110000101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Jul 23 23:20:27 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 23 23:20:27 2012] Using Nh = 2.6e+21, photon index=0.81, rate=0.193, arf fullrun_pn_xmm0110000101_pi300-10000_pass1_cl_src1.arf
[Mon Jul 23 23:20:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 23 23:20:27 2012] Updating source flux to 2.3e-12