[Mon Jul 23 06:15:05 2012] Detection parameters:
  Position = (196.8, 187.9) = 0 51 10.38 -73 21 15.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 286.3 +/- 24.0
  Background counts = 14.2
  Rate = 0.01 +/- 0.0009

[Mon Jul 23 06:15:06 2012] Off-axis axis estimate = 10.89'
[Mon Jul 23 09:46:18 2012] Using EEF radius (= 11.87 ")to estimate initial spatial extent for simple fitting
[Mon Jul 23 09:46:18 2012] Initial guess for spatial extent in simple fitting = 11.87"
[Mon Jul 23 09:46:18 2012] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.863
[Mon Jul 23 09:46:18 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 11.87"
[Mon Jul 23 11:56:58 2012] fullrun_mos2_xmm0110000101_pi300-10000_cl_pass0_src9.ximg exists
[Mon Jul 23 11:56:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110000101_pi300-10000_cl_pass0_src9.csv
[Mon Jul 23 11:56:58 2012] fullrun_mos2_xmm0110000101_pi300-10000_cl_pass0_src9_1.ximg exists
[Mon Jul 23 11:56:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110000101_pi300-10000_cl_pass0_src9.csv
[Mon Jul 23 11:56:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110000101_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110000101_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 11:56:59 2012] fullrun_mos2_xmm0110000101_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Mon Jul 23 11:56:59 2012] fullrun_mos2_xmm0110000101_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Mon Jul 23 11:56:59 2012] Fit fullrun_mos2_xmm0110000101_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Mon Jul 23 11:57:25 2012] Warning, spatial fit 9 centroid is now closest to src. 8
[Mon Jul 23 11:57:25 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 11:57:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 11:57:25 2012] Assessing source extent using major
[Mon Jul 23 11:57:25 2012] Source does appear to be extended
[Mon Jul 23 11:57:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 23 11:57:25 2012] Source is confused with source 8
[Mon Jul 23 16:30:11 2012] Using EEF radius (= 11.87 ")to estimate initial spatial extent for simple fitting
[Mon Jul 23 16:30:11 2012] Initial guess for spatial extent in simple fitting = 11.87"
[Mon Jul 23 16:30:11 2012] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.863
[Mon Jul 23 16:30:11 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 11.87"
[Mon Jul 23 18:52:15 2012] fullrun_mos2_xmm0110000101_pi300-10000_cl_pass1_src9.ximg exists
[Mon Jul 23 18:52:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110000101_pi300-10000_cl_pass1_src9.csv
[Mon Jul 23 18:52:15 2012] fullrun_mos2_xmm0110000101_pi300-10000_cl_pass1_src9_1.ximg exists
[Mon Jul 23 18:52:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110000101_pi300-10000_cl_pass1_src9.csv
[Mon Jul 23 18:52:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110000101_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110000101_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 18:52:15 2012] fullrun_mos2_xmm0110000101_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Mon Jul 23 18:52:15 2012] fullrun_mos2_xmm0110000101_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Mon Jul 23 18:52:15 2012] Fit fullrun_mos2_xmm0110000101_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Mon Jul 23 18:52:43 2012] Spatial fit model total counts = 1701.420000, observed total counts = 1701.000000
[Mon Jul 23 18:52:43 2012] Offset between fit and detection position for source 6 = 3.332074 pixels
[Mon Jul 23 18:52:43 2012] 1499.235000 total counts/ 428.885000 bgd. counts: snr = 51.683913
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 3.332074 pixels
  Position = (199.4, 185.9) = 0 51 7.71 -73 21 25.3
  Extent = 23.7 (23.7-47.5)", rotation angle = 0
  Source counts = 1070.3 +/- 38.7
  Background counts = 428.9
  Rate = 0.04 +/- 0.001
[Mon Jul 23 18:52:43 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 18:52:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 18:52:43 2012] Assessing source extent using major axis lower bound
[Mon Jul 23 18:52:43 2012] Source does appear to be extended
[Mon Jul 23 18:52:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 23 21:51:45 2012] Counts = 1070.350000, rescaling region sizes by 2.000000
[Mon Jul 23 21:51:45 2012] XMMSAS src. selection expression = ellipse(17303.170000, 16126.082000, 2849.148082, 2849.148082, 0.000000, X, Y)
[Mon Jul 23 21:51:45 2012] Writing source region out to fullrun_mos2_xmm0110000101_pi300-10000_pass1_cl_src6_src.reg
[Mon Jul 23 21:51:45 2012] Extracting stamp from image fullrun_mos2_xmm0110000101_pi300-10000_cl_sm2.00.img.gz, (36, 22) - (363, 350)
[Mon Jul 23 21:51:45 2012] XMMSAS bgd. selection expression = annulus(17303.170000, 16126.082000, 9497.160273, 18994.320547, X, Y) && !ellipse(24651.919400, 13997.579620, 489.991214, 489.991214, 0.000000, X, Y) && !ellipse(36653.207214, 26943.287170, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13339.231674, 29162.958038, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18132.583069, 29639.041962, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17484.498000, 16097.626000, 1923.096055, 1923.096055, 0.000000, X, Y) && !ellipse(19223.308400, 22525.599400, 536.534415, 536.534415, 0.000000, X, Y) && !ellipse(27084.996340, 27909.883200, 370.447211, 370.447211, 0.000000, X, Y) && !ellipse(17120.800522, 15781.729858, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35488.982000, 30486.516000, 1750.856050, 1750.856050, 0.000000, X, Y) && !ellipse(18685.650000, 16998.750000, 1842.248053, 1842.248053, 0.000000, X, Y) && !ellipse(31818.008575, 16661.882690, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17270.979599, 17165.779373, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27607.878174, 24866.233856, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34832.084000, 30313.210000, 2447.416070, 1204.424035, 13.918000, X, Y) && !ellipse(28818.268600, 11933.854600, 378.089611, 378.089611, 0.000000, X, Y) && !ellipse(15831.596000, 16789.358000, 1922.688055, 1922.688055, 0.000000, X, Y) && !ellipse(35671.160000, 30465.920000, 1775.264051, 1775.264051, 0.000000, X, Y) && !ellipse(25654.960600, 28699.086600, 318.448009, 318.448009, 0.000000, X, Y) && !ellipse(34518.898000, 30416.340400, 1085.392031, 1085.392031, 0.000000, X, Y) && !ellipse(31536.143200, 25655.065000, 579.466417, 579.466417, 0.000000, X, Y) && !ellipse(27184.740845, 23966.407257, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27960.182820, 23800.659400, 679.066420, 679.066420, 0.000000, X, Y) && !ellipse(32043.218781, 11378.488556, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36518.332000, 31673.920000, 2756.656079, 2756.656079, 0.000000, X, Y) && !ellipse(16009.820770, 15705.887619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33084.412415, 21490.567215, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30876.642400, 18411.507600, 1091.096031, 1091.096031, 0.000000, X, Y) && !ellipse(37154.779419, 32101.743591, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36861.409302, 30990.868713, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23878.225769, 11886.244324, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul 23 21:51:45 2012] Writing fullrun_mos2_xmm0110000101_pi300-10000_pass1_cl_src6.gif
[Mon Jul 23 21:57:35 2012] Mean detx,y = (-6819.23, -11879.62) 
[Mon Jul 23 21:57:37 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 23 22:02:10 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 23 22:02:11 2012] Setting source spectrum file to fullrun_mos2_xmm0110000101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Mon Jul 23 22:02:11 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0110000101_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Mon Jul 23 23:07:51 2012] Updating aperture counts using extracted products
[Mon Jul 23 23:07:51 2012] Error reading totcts from fullrun_mos2_xmm0110000101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Mon Jul 23 23:07:51 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 23 23:07:51 2012] Using photon index=1.80, rate=0.0398, arf fullrun_mos2_xmm0110000101_pi300-10000_pass1_cl_src6.arf
[Mon Jul 23 23:07:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 23 23:07:51 2012] Updating source flux to 6.3e-13
[Mon Jul 23 23:12:19 2012] Flag c found in src. 6 procflags, skipping spectral fitting