[Mon Jul 23 06:15:05 2012] Detection parameters:
  Position = (413.7, 364.7) = 0 47 32.26 -73 8 27.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 58.7 +/- 10.7
  Background counts = 10.4
  Rate = 0.002 +/- 0.0004

[Mon Jul 23 06:15:06 2012] Off-axis axis estimate = 9.64'
[Mon Jul 23 09:46:18 2012] Using EEF radius (= 11.25 ")to estimate initial spatial extent for simple fitting
[Mon Jul 23 09:46:18 2012] Initial guess for spatial extent in simple fitting = 11.25"
[Mon Jul 23 09:46:18 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.945
[Mon Jul 23 09:46:18 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 11.25"
[Mon Jul 23 11:56:59 2012] fullrun_mos2_xmm0110000101_pi300-10000_cl_pass0_src29.ximg exists
[Mon Jul 23 11:56:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110000101_pi300-10000_cl_pass0_src29.csv
[Mon Jul 23 11:56:59 2012] fullrun_mos2_xmm0110000101_pi300-10000_cl_pass0_src29_1.ximg exists
[Mon Jul 23 11:56:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110000101_pi300-10000_cl_pass0_src29.csv
[Mon Jul 23 11:56:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110000101_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110000101_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 11:57:00 2012] fullrun_mos2_xmm0110000101_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Mon Jul 23 11:57:00 2012] fullrun_mos2_xmm0110000101_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Mon Jul 23 11:57:00 2012] Fit fullrun_mos2_xmm0110000101_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly
[Mon Jul 23 11:57:25 2012] Source 12 is offset by 1.907573 and 4.965007 pixels which is larger than
2 X fitted extent = 1.219090 x 1.219090, not incorporating fit results
[Mon Jul 23 11:57:25 2012] Warning, spatial fit 29 centroid is now closest to src. 14
[Mon Jul 23 11:57:25 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 11:57:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 11:57:25 2012] Assessing source extent using major
[Mon Jul 23 11:57:25 2012] Source does appear to be extended
[Mon Jul 23 11:57:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 23 11:57:25 2012] Source is confused with source 21
[Mon Jul 23 16:30:11 2012] Using EEF radius (= 11.25 ")to estimate initial spatial extent for simple fitting
[Mon Jul 23 16:30:11 2012] Initial guess for spatial extent in simple fitting = 11.25"
[Mon Jul 23 16:30:11 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.945
[Mon Jul 23 16:30:11 2012] Giving source the simple spatial ID 28 for pass 1, mean size = 11.25"
[Mon Jul 23 18:52:15 2012] fullrun_mos2_xmm0110000101_pi300-10000_cl_pass1_src28.ximg exists
[Mon Jul 23 18:52:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110000101_pi300-10000_cl_pass1_src28.csv
[Mon Jul 23 18:52:15 2012] fullrun_mos2_xmm0110000101_pi300-10000_cl_pass1_src28_1.ximg exists
[Mon Jul 23 18:52:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0110000101_pi300-10000_cl_pass1_src28.csv
[Mon Jul 23 18:52:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0110000101_pi300-10000_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0110000101_pi300-10000_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 18:52:16 2012] fullrun_mos2_xmm0110000101_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Mon Jul 23 18:52:16 2012] fullrun_mos2_xmm0110000101_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Mon Jul 23 18:52:16 2012] Fit fullrun_mos2_xmm0110000101_pi300-10000_cl_pass1_tfrozen_src28 appears to have run properly
[Mon Jul 23 18:52:43 2012] Spatial fit model total counts = 1253.870000, observed total counts = 1252.000000
[Mon Jul 23 18:52:43 2012] Offset between fit and detection position for source 12 = 6.648745 pixels
[Mon Jul 23 18:52:43 2012] Warning, changing simple spatial fit ID from 28 to 19
[Mon Jul 23 18:52:43 2012] 631.262000 total counts/ 410.428000 bgd. counts: snr = 10.900526
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 6.648745 pixels
  Position = (420.3, 364.6) = 0 47 25.62 -73 8 27.1
  Extent = 34.5 (27.4-42.0)", rotation angle = 0
  Source counts = 220.8 +/- 25.1
  Background counts = 410.4
  Rate = 0.008 +/- 0.0009
[Mon Jul 23 18:52:43 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 18:52:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 18:52:43 2012] Assessing source extent using major axis lower bound
[Mon Jul 23 18:52:43 2012] Source does appear to be extended
[Mon Jul 23 18:52:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 23 21:51:46 2012] XMMSAS src. selection expression = ellipse(36518.332000, 31673.920000, 2067.492059, 2067.492059, 0.000000, X, Y)
[Mon Jul 23 21:51:46 2012] Writing source region out to fullrun_mos2_xmm0110000101_pi300-10000_pass1_cl_src12_src.reg
[Mon Jul 23 21:51:46 2012] Extracting stamp from image fullrun_mos2_xmm0110000101_pi300-10000_cl_sm2.00.img.gz, (301, 246) - (539, 483)
[Mon Jul 23 21:51:46 2012] XMMSAS bgd. selection expression = annulus(36518.332000, 31673.920000, 3445.820099, 6891.640198, X, Y) && !ellipse(36653.207214, 26943.287170, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35488.982000, 30486.516000, 1750.856050, 1750.856050, 0.000000, X, Y) && !ellipse(34832.084000, 30313.210000, 2447.416070, 1204.424035, 13.918000, X, Y) && !ellipse(35671.160000, 30465.920000, 1775.264051, 1775.264051, 0.000000, X, Y) && !ellipse(30498.889600, 38885.722800, 472.327214, 472.327214, 0.000000, X, Y) && !ellipse(34518.898000, 30416.340400, 1085.392031, 1085.392031, 0.000000, X, Y) && !ellipse(31536.143200, 25655.065000, 579.466417, 579.466417, 0.000000, X, Y) && !ellipse(40814.676800, 31426.782000, 3782.328109, 1118.128032, 145.067000, X, Y) && !ellipse(37154.779419, 32101.743591, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36861.409302, 30990.868713, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40736.262600, 30941.704000, 2094.440060, 2094.440060, 0.000000, X, Y)
[Mon Jul 23 21:51:46 2012] Writing fullrun_mos2_xmm0110000101_pi300-10000_pass1_cl_src12.gif
[Mon Jul 23 22:08:23 2012] Mean detx,y = (4511.61, 9657.67) 
[Mon Jul 23 22:08:24 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 23 22:10:16 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 23 22:10:16 2012] Setting source spectrum file to fullrun_mos2_xmm0110000101_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Mon Jul 23 22:10:16 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0110000101_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Mon Jul 23 23:07:51 2012] Updating aperture counts using extracted products
[Mon Jul 23 23:07:51 2012] Error reading totcts from fullrun_mos2_xmm0110000101_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Mon Jul 23 23:07:52 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 23 23:07:52 2012] Using photon index=1.80, rate=0.00821, arf fullrun_mos2_xmm0110000101_pi300-10000_pass1_cl_src12.arf
[Mon Jul 23 23:07:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 23 23:07:52 2012] Updating source flux to 1.4e-13
[Mon Jul 23 23:12:19 2012] Flag b found in src. 12 procflags, skipping spectral fitting
[Mon Jul 23 23:12:19 2012] Flag c found in src. 12 procflags, skipping spectral fitting