[Mon Jul 23 06:14:40 2012] Detection parameters:
  Position = (154.5, 337.5) = 0 51 51.68 -73 10 27.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 482.0 +/- 25.5
  Background counts = 7.8
  Rate = 0.02 +/- 0.0009

[Mon Jul 23 06:14:41 2012] Off-axis axis estimate = 10.81'
[Mon Jul 23 07:51:28 2012] Using EEF radius (= 11.84 ")to estimate initial spatial extent for simple fitting
[Mon Jul 23 07:51:28 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jul 23 07:51:28 2012] Initial guess for spatial extent in simple fitting = 11.84"
[Mon Jul 23 07:51:28 2012] source mask rpix=2.7, npix_max = 41, mask sum = 25, frac = 0.603
[Mon Jul 23 07:51:28 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 11.84"
[Mon Jul 23 09:46:17 2012] fullrun_mos1_xmm0110000101_pi300-10000_cl_pass0_src4.ximg exists
[Mon Jul 23 09:46:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110000101_pi300-10000_cl_pass0_src4.csv
[Mon Jul 23 09:46:17 2012] fullrun_mos1_xmm0110000101_pi300-10000_cl_pass0_src4_1.ximg exists
[Mon Jul 23 09:46:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110000101_pi300-10000_cl_pass0_src4.csv
[Mon Jul 23 09:46:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110000101_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110000101_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 09:46:18 2012] fullrun_mos1_xmm0110000101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Mon Jul 23 09:46:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110000101_pi300-10000_cl_pass0_tfrozen_src4.csv
[Mon Jul 23 09:46:18 2012] fullrun_mos1_xmm0110000101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Mon Jul 23 09:46:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110000101_pi300-10000_cl_pass0_tfrozen_src4.csv
[Mon Jul 23 09:46:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110000101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110000101_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 11:57:18 2012] Spatial fit model total counts = 792.041000, observed total counts = 495.000000
[Mon Jul 23 11:57:18 2012] Poor agreement between spatial fit and data for source 9
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jul 23 11:57:18 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 11:57:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 11:57:18 2012] Assessing source extent using major
[Mon Jul 23 11:57:18 2012] Source does appear to be extended
[Mon Jul 23 11:57:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 23 13:36:28 2012] Using EEF radius (= 11.84 ")to estimate initial spatial extent for simple fitting
[Mon Jul 23 13:36:28 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jul 23 13:36:28 2012] Initial guess for spatial extent in simple fitting = 11.84"
[Mon Jul 23 13:36:28 2012] source mask rpix=2.7, npix_max = 41, mask sum = 25, frac = 0.603
[Mon Jul 23 13:36:28 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 11.84"
[Mon Jul 23 16:30:09 2012] fullrun_mos1_xmm0110000101_pi300-10000_cl_pass1_src4.ximg exists
[Mon Jul 23 16:30:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110000101_pi300-10000_cl_pass1_src4.csv
[Mon Jul 23 16:30:09 2012] fullrun_mos1_xmm0110000101_pi300-10000_cl_pass1_src4_1.ximg exists
[Mon Jul 23 16:30:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110000101_pi300-10000_cl_pass1_src4.csv
[Mon Jul 23 16:30:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110000101_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110000101_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 16:30:10 2012] fullrun_mos1_xmm0110000101_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Mon Jul 23 16:30:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110000101_pi300-10000_cl_pass1_tfrozen_src4.csv
[Mon Jul 23 16:30:10 2012] fullrun_mos1_xmm0110000101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Mon Jul 23 16:30:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110000101_pi300-10000_cl_pass1_tfrozen_src4.csv
[Mon Jul 23 16:30:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110000101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110000101_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 18:52:36 2012] Spatial fit model total counts = 813.719000, observed total counts = 495.000000
[Mon Jul 23 18:52:36 2012] Poor agreement between spatial fit and data for source 9
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jul 23 18:52:36 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 18:52:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 18:52:36 2012] Assessing source extent using major
[Mon Jul 23 18:52:36 2012] Source does appear to be extended
[Mon Jul 23 18:52:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 23 20:20:01 2012] XMMSAS src. selection expression = ellipse(13393.000000, 29315.733734, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jul 23 20:20:01 2012] Writing source region out to fullrun_mos1_xmm0110000101_pi300-10000_pass1_cl_src9_src.reg
[Mon Jul 23 20:20:01 2012] Extracting stamp from image fullrun_mos1_xmm0110000101_pi300-10000_cl_sm2.00.img.gz, (117, 300) - (192, 375)
[Mon Jul 23 20:20:01 2012] XMMSAS bgd. selection expression = annulus(13393.000000, 29315.733734, 1087.500000, 2175.000000, X, Y) && !ellipse(13143.875946, 28608.303833, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul 23 20:20:01 2012] Writing fullrun_mos1_xmm0110000101_pi300-10000_pass1_cl_src9.gif
[Mon Jul 23 20:24:29 2012] Mean detx,y = (-12944.09, -7127.92) 
[Mon Jul 23 20:24:31 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 23 20:24:57 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 23 20:24:58 2012] Setting source spectrum file to fullrun_mos1_xmm0110000101_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Mon Jul 23 20:24:58 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0110000101_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Mon Jul 23 20:49:28 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jul 23 20:49:28 2012] rmf not generated due to insufficient counts
[Mon Jul 23 23:07:49 2012] Updating aperture counts using extracted products
[Mon Jul 23 23:07:49 2012] Error reading totcts from fullrun_mos1_xmm0110000101_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Mon Jul 23 23:07:50 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 23 23:07:50 2012] Using photon index=1.80, rate=0.0179, arf fullrun_mos1_xmm0110000101_pi300-10000_pass1_cl_src9.arf
[Mon Jul 23 23:07:50 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 23 23:07:50 2012] Updating source flux to 1e-12
[Mon Jul 23 23:07:53 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting