[Mon Jul 23 06:14:41 2012] Detection parameters:
  Position = (463.2, 357.2) = 0 46 42.65 -73 8 55.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 32.1 +/- 8.6
  Background counts = 9.4
  Rate = 0.001 +/- 0.0003

[Mon Jul 23 06:14:41 2012] Off-axis axis estimate = 12.68'
[Mon Jul 23 07:51:28 2012] Using EEF radius (= 12.77 ")to estimate initial spatial extent for simple fitting
[Mon Jul 23 07:51:28 2012] Initial guess for spatial extent in simple fitting = 12.77"
[Mon Jul 23 07:51:28 2012] source mask rpix=2.9, npix_max = 47, mask sum = 48, frac = 1.017
[Mon Jul 23 07:51:28 2012] Giving source the simple spatial ID 39 for pass 0, mean size = 12.77"
[Mon Jul 23 09:46:17 2012] fullrun_mos1_xmm0110000101_pi300-10000_cl_pass0_src39.ximg exists
[Mon Jul 23 09:46:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110000101_pi300-10000_cl_pass0_src39.csv
[Mon Jul 23 09:46:17 2012] fullrun_mos1_xmm0110000101_pi300-10000_cl_pass0_src39_1.ximg exists
[Mon Jul 23 09:46:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110000101_pi300-10000_cl_pass0_src39.csv
[Mon Jul 23 09:46:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110000101_pi300-10000_cl_pass0_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110000101_pi300-10000_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 09:46:18 2012] fullrun_mos1_xmm0110000101_pi300-10000_cl_pass0_tfrozen_src39.ximg exists
[Mon Jul 23 09:46:18 2012] fullrun_mos1_xmm0110000101_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists
[Mon Jul 23 09:46:18 2012] Fit fullrun_mos1_xmm0110000101_pi300-10000_cl_pass0_tfrozen_src39 appears to have run properly
[Mon Jul 23 11:57:18 2012] Warning: source 39 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 29 at 12.695895 pixels away
[Mon Jul 23 11:57:18 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 11:57:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 11:57:18 2012] Assessing source extent using major
[Mon Jul 23 11:57:18 2012] Source does appear to be extended
[Mon Jul 23 11:57:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 23 11:57:18 2012] Source is confused with source 28
[Mon Jul 23 13:36:28 2012] Using EEF radius (= 12.77 ")to estimate initial spatial extent for simple fitting
[Mon Jul 23 13:36:28 2012] Initial guess for spatial extent in simple fitting = 12.77"
[Mon Jul 23 13:36:28 2012] source mask rpix=2.9, npix_max = 47, mask sum = 48, frac = 1.017
[Mon Jul 23 13:36:28 2012] Giving source the simple spatial ID 39 for pass 1, mean size = 12.77"
[Mon Jul 23 16:30:10 2012] fullrun_mos1_xmm0110000101_pi300-10000_cl_pass1_src39.ximg exists
[Mon Jul 23 16:30:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110000101_pi300-10000_cl_pass1_src39.csv
[Mon Jul 23 16:30:10 2012] fullrun_mos1_xmm0110000101_pi300-10000_cl_pass1_src39_1.ximg exists
[Mon Jul 23 16:30:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110000101_pi300-10000_cl_pass1_src39.csv
[Mon Jul 23 16:30:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110000101_pi300-10000_cl_pass1_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110000101_pi300-10000_cl_pass1_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 16:30:10 2012] fullrun_mos1_xmm0110000101_pi300-10000_cl_pass1_tfrozen_src39.ximg exists
[Mon Jul 23 16:30:10 2012] fullrun_mos1_xmm0110000101_pi300-10000_cl_pass1_tfrozen_src39_1.ximg exists
[Mon Jul 23 16:30:10 2012] Fit fullrun_mos1_xmm0110000101_pi300-10000_cl_pass1_tfrozen_src39 appears to have run properly
[Mon Jul 23 18:52:36 2012] Warning: source 34 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 29 at 18.496637 pixels away
[Mon Jul 23 18:52:36 2012] Spatial fit model total counts = 239.992000, observed total counts = 235.000000
[Mon Jul 23 18:52:36 2012] Offset between fit and detection position for source 29 = 2.339330 pixels
[Mon Jul 23 18:52:36 2012] 173.940900 total counts/ 140.396000 bgd. counts: snr = 2.831060
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 2.339330 pixels
  Position = (460.9, 357.5) = 0 46 44.97 -73 8 56.6
  Extent = 12.0 (3.2-25.5)", rotation angle = 0
  Source counts = 33.5 +/- 13.2
  Background counts = 140.4
  Rate = 0.001 +/- 0.0005
[Mon Jul 23 18:52:36 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 18:52:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 18:52:36 2012] Assessing source extent using major axis lower bound
[Mon Jul 23 18:52:36 2012] Source does appear to be extended
[Mon Jul 23 18:52:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 23 20:20:02 2012] XMMSAS src. selection expression = ellipse(40047.697000, 31049.748200, 722.736021, 722.736021, 0.000000, X, Y)
[Mon Jul 23 20:20:02 2012] Writing source region out to fullrun_mos1_xmm0110000101_pi300-10000_pass1_cl_src29_src.reg
[Mon Jul 23 20:20:02 2012] Extracting stamp from image fullrun_mos1_xmm0110000101_pi300-10000_cl_sm2.00.img.gz, (419, 316) - (502, 399)
[Mon Jul 23 20:20:02 2012] XMMSAS bgd. selection expression = annulus(40047.697000, 31049.748200, 1204.560035, 2409.120069, X, Y) && !ellipse(36103.972000, 30949.302000, 1604.784046, 1604.784046, 0.000000, X, Y) && !ellipse(37077.930000, 31741.420800, 724.500021, 724.500021, 0.000000, X, Y) && !ellipse(40908.354000, 31128.266000, 1532.240044, 1532.240044, 0.000000, X, Y) && !ellipse(41270.874000, 31482.930000, 2077.784060, 2077.784060, 0.000000, X, Y) && !ellipse(37520.395400, 31646.930000, 1891.824054, 1891.824054, 0.000000, X, Y) && !ellipse(37046.366800, 30308.054000, 1293.848037, 1293.848037, 0.000000, X, Y)
[Mon Jul 23 20:20:02 2012] Writing fullrun_mos1_xmm0110000101_pi300-10000_pass1_cl_src29.gif
[Mon Jul 23 20:40:37 2012] Mean detx,y = (13482.14, -3603.11) 
[Mon Jul 23 20:40:38 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 23 20:40:48 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 23 20:40:48 2012] Setting source spectrum file to fullrun_mos1_xmm0110000101_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Mon Jul 23 20:40:48 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0110000101_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Mon Jul 23 21:44:07 2012] Not generating rmf since there are only 33 counts
[Mon Jul 23 21:44:07 2012] rmf not generated due to insufficient counts
[Mon Jul 23 23:07:50 2012] Updating aperture counts using extracted products
[Mon Jul 23 23:07:50 2012] Error reading totcts from fullrun_mos1_xmm0110000101_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Mon Jul 23 23:07:50 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 23 23:07:50 2012] Using photon index=1.80, rate=0.00125, arf fullrun_mos1_xmm0110000101_pi300-10000_pass1_cl_src29.arf
[Mon Jul 23 23:07:50 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 23 23:07:50 2012] Updating source flux to 2.8e-14
[Mon Jul 23 23:07:53 2012] Flag c found in src. 29 procflags, skipping spectral fitting
[Mon Jul 23 23:07:53 2012] Source 29 has fewer than 100.000000 counts, skipping spectral fitting