[Mon Jul 23 06:14:40 2012] Detection parameters:
  Position = (474.7, 358.5) = 0 46 31.13 -73 8 55.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 41.9 +/- 9.6
  Background counts = 8.0
  Rate = 0.002 +/- 0.0004

[Mon Jul 23 06:14:41 2012] Off-axis axis estimate = 13.50'
[Mon Jul 23 07:51:28 2012] Using EEF radius (= 13.18 ")to estimate initial spatial extent for simple fitting
[Mon Jul 23 07:51:28 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jul 23 07:51:28 2012] Initial guess for spatial extent in simple fitting = 13.18"
[Mon Jul 23 07:51:28 2012] source mask rpix=3.0, npix_max = 49, mask sum = 46, frac = 0.923
[Mon Jul 23 07:51:28 2012] Giving source the simple spatial ID 35 for pass 0, mean size = 13.18"
[Mon Jul 23 09:46:17 2012] fullrun_mos1_xmm0110000101_pi300-10000_cl_pass0_src35.ximg exists
[Mon Jul 23 09:46:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110000101_pi300-10000_cl_pass0_src35.csv
[Mon Jul 23 09:46:17 2012] fullrun_mos1_xmm0110000101_pi300-10000_cl_pass0_src35_1.ximg exists
[Mon Jul 23 09:46:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110000101_pi300-10000_cl_pass0_src35.csv
[Mon Jul 23 09:46:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110000101_pi300-10000_cl_pass0_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110000101_pi300-10000_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 09:46:18 2012] fullrun_mos1_xmm0110000101_pi300-10000_cl_pass0_tfrozen_src35.ximg exists
[Mon Jul 23 09:46:18 2012] fullrun_mos1_xmm0110000101_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists
[Mon Jul 23 09:46:18 2012] Fit fullrun_mos1_xmm0110000101_pi300-10000_cl_pass0_tfrozen_src35 appears to have run properly
[Mon Jul 23 11:57:18 2012] Spatial fit model total counts = 266.985000, observed total counts = 260.000000
[Mon Jul 23 11:57:18 2012] Offset between fit and detection position for source 26 = 3.899364 pixels
[Mon Jul 23 11:57:18 2012] Warning, changing simple spatial fit ID from 35 to 34
[Mon Jul 23 11:57:18 2012] 224.660800 total counts/ 84.075800 bgd. counts: snr = 15.332165
Spatial fit parameters:
  Offset between fit and detection position for source 26 = 3.899364 pixels
  Position = (474.9, 362.4) = 0 46 30.97 -73 8 34.2
  Extent = 26.0 (25.9-51.9)", rotation angle = 0
  Source counts = 140.6 +/- 15.0
  Background counts = 84.1
  Rate = 0.005 +/- 0.0006
[Mon Jul 23 11:57:18 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 11:57:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 11:57:18 2012] Assessing source extent using major axis lower bound
[Mon Jul 23 11:57:18 2012] Source does appear to be extended
[Mon Jul 23 11:57:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 23 11:57:18 2012] Source is confused with source 28
[Mon Jul 23 13:36:28 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jul 23 13:36:28 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jul 23 13:36:28 2012] Initial guess for spatial extent in simple fitting = 25.97"
[Mon Jul 23 13:36:28 2012] source mask rpix=6.0, npix_max = 167, mask sum = 165, frac = 0.985
[Mon Jul 23 13:36:28 2012] Giving source the simple spatial ID 35 for pass 1, mean size = 25.97"
[Mon Jul 23 16:30:10 2012] fullrun_mos1_xmm0110000101_pi300-10000_cl_pass1_src35.ximg exists
[Mon Jul 23 16:30:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110000101_pi300-10000_cl_pass1_src35.csv
[Mon Jul 23 16:30:10 2012] fullrun_mos1_xmm0110000101_pi300-10000_cl_pass1_src35_1.ximg exists
[Mon Jul 23 16:30:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0110000101_pi300-10000_cl_pass1_src35.csv
[Mon Jul 23 16:30:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0110000101_pi300-10000_cl_pass1_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0110000101_pi300-10000_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 16:30:10 2012] fullrun_mos1_xmm0110000101_pi300-10000_cl_pass1_tfrozen_src35.ximg exists
[Mon Jul 23 16:30:10 2012] fullrun_mos1_xmm0110000101_pi300-10000_cl_pass1_tfrozen_src35_1.ximg exists
[Mon Jul 23 16:30:10 2012] Fit fullrun_mos1_xmm0110000101_pi300-10000_cl_pass1_tfrozen_src35 appears to have run properly
[Mon Jul 23 18:52:36 2012] Warning, spatial fit 35 centroid is now closest to src. 28
[Mon Jul 23 18:52:36 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 18:52:36 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 18:52:36 2012] Assessing source extent using major axis lower bound
[Mon Jul 23 18:52:36 2012] Source does appear to be extended
[Mon Jul 23 18:52:36 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul 23 20:20:02 2012] XMMSAS src. selection expression = ellipse(41270.874000, 31482.930000, 1558.338045, 1558.338045, 0.000000, X, Y)
[Mon Jul 23 20:20:02 2012] Writing source region out to fullrun_mos1_xmm0110000101_pi300-10000_pass1_cl_src26_src.reg
[Mon Jul 23 20:20:02 2012] Extracting stamp from image fullrun_mos1_xmm0110000101_pi300-10000_cl_sm2.00.img.gz, (385, 273) - (564, 452)
[Mon Jul 23 20:20:02 2012] XMMSAS bgd. selection expression = annulus(41270.874000, 31482.930000, 2597.230075, 5194.460149, X, Y) && !ellipse(36643.663200, 26867.280200, 536.912015, 536.912015, 0.000000, X, Y) && !ellipse(35630.816000, 30638.814000, 1950.256056, 1950.256056, 0.000000, X, Y) && !ellipse(35003.280400, 30351.948000, 1702.000049, 1702.000049, 0.000000, X, Y) && !ellipse(36103.972000, 30949.302000, 1604.784046, 1604.784046, 0.000000, X, Y) && !ellipse(34821.782000, 30370.291200, 1665.576048, 1665.576048, 0.000000, X, Y) && !ellipse(37077.930000, 31741.420800, 724.500021, 724.500021, 0.000000, X, Y) && !ellipse(35456.088000, 32111.278000, 1781.608051, 1781.608051, 0.000000, X, Y) && !ellipse(40908.354000, 31128.266000, 1532.240044, 1532.240044, 0.000000, X, Y) && !ellipse(36511.967621, 31864.126434, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37520.395400, 31646.930000, 1891.824054, 1891.824054, 0.000000, X, Y) && !ellipse(40047.697000, 31049.748200, 963.648028, 963.648028, 0.000000, X, Y) && !ellipse(37046.366800, 30308.054000, 1293.848037, 1293.848037, 0.000000, X, Y)
[Mon Jul 23 20:20:02 2012] Writing fullrun_mos1_xmm0110000101_pi300-10000_pass1_cl_src26.gif
[Mon Jul 23 20:38:06 2012] Mean detx,y = (14581.75, -3901.72) 
[Mon Jul 23 20:38:07 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 23 20:38:46 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 23 20:38:46 2012] Setting source spectrum file to fullrun_mos1_xmm0110000101_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Mon Jul 23 20:38:46 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0110000101_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Mon Jul 23 23:07:50 2012] Updating aperture counts using extracted products
[Mon Jul 23 23:07:50 2012] Error reading totcts from fullrun_mos1_xmm0110000101_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Mon Jul 23 23:07:50 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 23 23:07:50 2012] Using photon index=1.80, rate=0.00523, arf fullrun_mos1_xmm0110000101_pi300-10000_pass1_cl_src26.arf
[Mon Jul 23 23:07:50 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 23 23:07:50 2012] Updating source flux to 1.1e-13
[Mon Jul 23 23:07:53 2012] Flag c found in src. 26 procflags, skipping spectral fitting