[Tue Jun  4 04:56:19 2013] Detection parameters:
  Position = (302.4, 158.9) = 5 5 45.89 -68 4 17.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 78.2 +/- 17.6
  Background counts = 84.6
  Rate = 0.002 +/- 0.0004

[Tue Jun  4 04:56:19 2013] Off-axis axis estimate = 10.12'
[Tue Jun  4 04:56:56 2013] Using EEF radius (= 11.49 ")to estimate initial spatial extent for simple fitting
[Tue Jun  4 04:56:56 2013] Initial guess for spatial extent in simple fitting = 11.49"
[Tue Jun  4 04:56:56 2013] source mask rpix=2.6, npix_max = 39, mask sum = 42, frac = 1.064
[Tue Jun  4 04:56:56 2013] Giving source the simple spatial ID 61 for pass 0, mean size = 11.49"
[Tue Jun  4 04:56:59 2013] fullrun_pn_xmm0109990201_pi300-10000_cl_pass0_src61.ximg exists
[Tue Jun  4 04:56:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109990201_pi300-10000_cl_pass0_src61.csv
[Tue Jun  4 04:56:59 2013] fullrun_pn_xmm0109990201_pi300-10000_cl_pass0_src61_1.ximg exists
[Tue Jun  4 04:56:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109990201_pi300-10000_cl_pass0_src61.csv
[Tue Jun  4 04:56:59 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109990201_pi300-10000_cl_pass0_src61_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109990201_pi300-10000_cl_pass0_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun  4 04:57:01 2013] fullrun_pn_xmm0109990201_pi300-10000_cl_pass0_tfrozen_src61.ximg exists
[Tue Jun  4 04:57:01 2013] fullrun_pn_xmm0109990201_pi300-10000_cl_pass0_tfrozen_src61_1.ximg exists
[Tue Jun  4 04:57:01 2013] Fit fullrun_pn_xmm0109990201_pi300-10000_cl_pass0_tfrozen_src61 appears to have run properly
[Tue Jun  4 04:57:25 2013] Warning, spatial fit 61 centroid is now closest to src. 66
[Tue Jun  4 04:57:25 2013] Spatial fit model total counts = 821.524000, observed total counts = 820.000000
[Tue Jun  4 04:57:25 2013] Offset between fit and detection position for source 63 = 3.176809 pixels
[Tue Jun  4 04:57:25 2013] Warning, changing simple spatial fit ID from 61 to 63
[Tue Jun  4 04:57:25 2013] 863.355000 total counts/ 550.158000 bgd. counts: snr = 13.352847
Spatial fit parameters:
  Offset between fit and detection position for source 63 = 3.176809 pixels
  Position = (299.3, 158.8) = 5 5 48.35 -68 4 18.1
  Extent = 22.5 (22.5-22.5)", rotation angle = 0
  Source counts = 313.2 +/- 29.4
  Background counts = 550.2
  Rate = 0.02 +/- 0.002
[Tue Jun  4 04:57:25 2013] Vigneting correction estimate = 1.000000
[Tue Jun  4 04:57:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun  4 04:57:25 2013] Assessing source extent using major axis lower bound
[Tue Jun  4 04:57:25 2013] Source does appear to be extended
[Tue Jun  4 04:57:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun  4 04:57:25 2013] Source is confused with source 65
[Tue Jun  4 04:57:25 2013] Source is confused with source 66
[Tue Jun  4 04:57:44 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jun  4 04:57:44 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jun  4 04:57:44 2013] Initial guess for spatial extent in simple fitting = 22.52"
[Tue Jun  4 04:57:44 2013] source mask rpix=5.2, npix_max = 128, mask sum = 121, frac = 0.939
[Tue Jun  4 04:57:44 2013] Giving source the simple spatial ID 54 for pass 1, mean size = 22.52"
[Tue Jun  4 04:57:46 2013] fullrun_pn_xmm0109990201_pi300-10000_cl_pass1_src54.ximg exists
[Tue Jun  4 04:57:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109990201_pi300-10000_cl_pass1_src54.csv
[Tue Jun  4 04:57:46 2013] fullrun_pn_xmm0109990201_pi300-10000_cl_pass1_src54_1.ximg exists
[Tue Jun  4 04:57:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109990201_pi300-10000_cl_pass1_src54.csv
[Tue Jun  4 04:57:46 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109990201_pi300-10000_cl_pass1_src54_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109990201_pi300-10000_cl_pass1_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun  4 04:57:48 2013] fullrun_pn_xmm0109990201_pi300-10000_cl_pass1_tfrozen_src54.ximg exists
[Tue Jun  4 04:57:48 2013] fullrun_pn_xmm0109990201_pi300-10000_cl_pass1_tfrozen_src54_1.ximg exists
[Tue Jun  4 04:57:48 2013] Fit fullrun_pn_xmm0109990201_pi300-10000_cl_pass1_tfrozen_src54 appears to have run properly
[Tue Jun  4 04:58:10 2013] Warning, spatial fit 54 centroid is now closest to src. 65
[Tue Jun  4 04:58:10 2013] Spatial fit model total counts = 1321.420000, observed total counts = 1297.000000
[Tue Jun  4 04:58:10 2013] Offset between fit and detection position for source 63 = 2.744930 pixels
[Tue Jun  4 04:58:10 2013] Warning, changing simple spatial fit ID from 54 to 56
[Tue Jun  4 04:58:10 2013] 1056.114000 total counts/ 844.068000 bgd. counts: snr = 7.298630
Spatial fit parameters:
  Offset between fit and detection position for source 63 = 2.744930 pixels
  Position = (301.9, 158.2) = 5 5 46.27 -68 4 20.7
  Extent = 22.5 (16.8-45.1)" x 16.2 (7.9-22.4)", rotation angle = 221 (302-0) degrees
  Source counts = 212.0 +/- 32.5
  Background counts = 844.1
  Rate = 0.01 +/- 0.002
[Tue Jun  4 04:58:10 2013] Vigneting correction estimate = 1.000000
[Tue Jun  4 04:58:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun  4 04:58:10 2013] Assessing source extent using major axis lower bound
[Tue Jun  4 04:58:10 2013] Source does appear to be extended
[Tue Jun  4 04:58:10 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.75
[Tue Jun  4 04:58:33 2013] XMMSAS src. selection expression = ellipse(26221.126000, 13715.962000, 1351.608039, 972.132028, 220.777000, X, Y)
[Tue Jun  4 04:58:33 2013] Not overwriting source region fullrun_pn_xmm0109990201_pi300-10000_pass1_cl_src63_src.reg
[Tue Jun  4 04:58:33 2013] Extracting stamp from image fullrun_pn_xmm0109990201_pi300-10000_cl_sm2.00.img.gz, (224, 81) - (380, 236)
[Tue Jun  4 04:58:33 2013] XMMSAS bgd. selection expression = annulus(26221.126000, 13715.962000, 2252.680065, 4505.360130, X, Y) && !ellipse(25231.909800, 16769.386200, 4707.061355, 4707.061355, 0.000000, X, Y) && !ellipse(29627.530000, 18507.400000, 1627.704047, 1627.704047, 0.000000, X, Y) && !ellipse(30156.828268, 17499.414214, 3523.392101, 1471.666174, 66.299299, X, Y) && !ellipse(26272.608185, 17278.910172, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30040.722000, 17169.282000, 1711.688049, 1711.688049, 0.000000, X, Y) && !ellipse(30485.245200, 16732.781200, 3523.392101, 1568.432045, 67.283000, X, Y) && !ellipse(26356.000000, 16788.512985, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30770.511902, 16048.430206, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31177.660645, 15611.233170, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31089.593323, 15089.396454, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31510.611938, 14389.155045, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28790.658000, 20982.890000, 3018.416087, 3018.416087, 0.000000, X, Y) && !ellipse(24210.034000, 19408.822000, 1266.603226, 1266.603226, 0.000000, X, Y) && !ellipse(29504.412000, 19544.748000, 2874.560083, 1882.328054, 90.000000, X, Y) && !ellipse(30713.579600, 16820.934000, 1687.896049, 1687.896049, 0.000000, X, Y) && !ellipse(30465.433105, 15533.701004, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21379.202011, 13869.251190, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25972.032318, 14312.042374, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26514.328000, 13196.814000, 1838.184053, 1838.184053, 0.000000, X, Y)
[Tue Jun  4 04:58:33 2013] Writing fullrun_pn_xmm0109990201_pi300-10000_pass1_cl_src63.gif
[Tue Jun  4 05:48:25 2013] Mean detx,y = (-4787.07, 13062.02) 
[Tue Jun  4 05:48:30 2013] Setting backscal keywords in source and bgd. spectrum
[Tue Jun  4 05:49:12 2013] Binned source spectrum to 10 counts/bin
[Tue Jun  4 05:49:12 2013] Setting source spectrum file to fullrun_pn_xmm0109990201_pi300-10000_pass1_cl_src63_src_b10.pi.gz
[Tue Jun  4 05:49:12 2013] Setting bgd. spectrum file to fullrun_pn_xmm0109990201_pi300-10000_pass1_cl_src63_bgd.pi.gz
[Tue Jun  4 20:32:34 2013] Updating aperture counts using extracted products
[Tue Jun  4 20:32:34 2013] Total counts from fullrun_pn_xmm0109990201_pi300-10000_pass1_cl_src63_src_b10.pi.gz = 1218.00
[Tue Jun  4 20:32:34 2013] Total counts from fullrun_pn_xmm0109990201_pi300-10000_pass1_cl_src63_bgd.pi.gz = 583.00
[Tue Jun  4 20:32:34 2013] Got source and background scale factors 3817201.000000, 0.000000
[Tue Jun  4 20:32:34 2013] Background scale factor is not positive, halting re-assessment of this source
[Tue Jun  4 20:32:36 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun  4 20:32:36 2013] Using photon index=1.80, rate=0.0135, arf fullrun_pn_xmm0109990201_pi300-10000_pass1_cl_src63.arf
[Tue Jun  4 20:32:36 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun  4 20:32:36 2013] Updating source flux to 1.1e-13
[Tue Jun  4 20:32:43 2013] Flag c found in src. 63 procflags, skipping spectral fitting
[Tue Jun  4 20:33:08 2013] xmm0109990201/analysis//spectral/fullrun_pn_xmm0109990201_pi300-10000_pass1_cl_src63_pl.csv not found, spectral fit skipped or did not complete