[Tue Jun  4 04:56:12 2013] Detection parameters:
  Position = (333.9, 362.0) = 5 5 21.72 -67 49 33.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 409.3 +/- 27.1
  Background counts = 88.0
  Rate = 0.01 +/- 0.0009

[Tue Jun  4 04:56:19 2013] Off-axis axis estimate = 5.28'
[Tue Jun  4 04:56:56 2013] Using EEF radius (= 9.07 ")to estimate initial spatial extent for simple fitting
[Tue Jun  4 04:56:56 2013] Initial guess for spatial extent in simple fitting = 9.07"
[Tue Jun  4 04:56:56 2013] source mask rpix=2.1, npix_max = 26, mask sum = 33, frac = 1.235
[Tue Jun  4 04:56:56 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 9.07"
[Tue Jun  4 04:56:57 2013] fullrun_pn_xmm0109990201_pi300-10000_cl_pass0_src4.ximg exists
[Tue Jun  4 04:56:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109990201_pi300-10000_cl_pass0_src4.csv
[Tue Jun  4 04:56:57 2013] fullrun_pn_xmm0109990201_pi300-10000_cl_pass0_src4_1.ximg exists
[Tue Jun  4 04:56:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109990201_pi300-10000_cl_pass0_src4.csv
[Tue Jun  4 04:56:57 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109990201_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109990201_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun  4 04:56:59 2013] fullrun_pn_xmm0109990201_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Tue Jun  4 04:56:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109990201_pi300-10000_cl_pass0_tfrozen_src4.csv
[Tue Jun  4 04:56:59 2013] fullrun_pn_xmm0109990201_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Tue Jun  4 04:56:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109990201_pi300-10000_cl_pass0_tfrozen_src4.csv
[Tue Jun  4 04:56:59 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109990201_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109990201_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun  4 04:57:25 2013] Spatial fit model total counts = 760.824000, observed total counts = 636.000000
[Tue Jun  4 04:57:25 2013] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jun  4 04:57:25 2013] Spatial fit model total counts = 654.289000, observed total counts = 480.000000
[Tue Jun  4 04:57:25 2013] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jun  4 04:57:25 2013] Vigneting correction estimate = 1.000000
[Tue Jun  4 04:57:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun  4 04:57:25 2013] Assessing source extent using major
[Tue Jun  4 04:57:25 2013] Source does appear to be extended
[Tue Jun  4 04:57:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun  4 04:57:44 2013] Using EEF radius (= 9.07 ")to estimate initial spatial extent for simple fitting
[Tue Jun  4 04:57:44 2013] Initial guess for spatial extent in simple fitting = 9.07"
[Tue Jun  4 04:57:44 2013] source mask rpix=2.1, npix_max = 26, mask sum = 33, frac = 1.235
[Tue Jun  4 04:57:44 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 9.07"
[Tue Jun  4 04:57:45 2013] fullrun_pn_xmm0109990201_pi300-10000_cl_pass1_src4.ximg exists
[Tue Jun  4 04:57:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109990201_pi300-10000_cl_pass1_src4.csv
[Tue Jun  4 04:57:45 2013] fullrun_pn_xmm0109990201_pi300-10000_cl_pass1_src4_1.ximg exists
[Tue Jun  4 04:57:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109990201_pi300-10000_cl_pass1_src4.csv
[Tue Jun  4 04:57:45 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109990201_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109990201_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun  4 04:57:46 2013] fullrun_pn_xmm0109990201_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Tue Jun  4 04:57:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109990201_pi300-10000_cl_pass1_tfrozen_src4.csv
[Tue Jun  4 04:57:46 2013] fullrun_pn_xmm0109990201_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Tue Jun  4 04:57:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0109990201_pi300-10000_cl_pass1_tfrozen_src4.csv
[Tue Jun  4 04:57:46 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0109990201_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0109990201_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun  4 04:58:10 2013] Spatial fit model total counts = 756.606000, observed total counts = 636.000000
[Tue Jun  4 04:58:10 2013] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jun  4 04:58:10 2013] Vigneting correction estimate = 1.000000
[Tue Jun  4 04:58:10 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun  4 04:58:10 2013] Assessing source extent using major
[Tue Jun  4 04:58:10 2013] Source does appear to be extended
[Tue Jun  4 04:58:10 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun  4 04:58:29 2013] XMMSAS src. selection expression = ellipse(29003.473083, 31446.923096, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Jun  4 04:58:29 2013] Not overwriting source region fullrun_pn_xmm0109990201_pi300-10000_pass1_cl_src4_src.reg
[Tue Jun  4 04:58:29 2013] Extracting stamp from image fullrun_pn_xmm0109990201_pi300-10000_cl_sm2.00.img.gz, (296, 325) - (371, 400)
[Tue Jun  4 04:58:29 2013] XMMSAS bgd. selection expression = annulus(29003.473083, 31446.923096, 1087.500000, 2175.000000, X, Y) && !ellipse(26836.493800, 28033.360000, 3511.872101, 3511.872101, 0.000000, X, Y) && !ellipse(26339.543200, 27891.938800, 3467.616100, 3467.616100, 0.000000, X, Y) && !ellipse(29451.796021, 30615.524567, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27645.707031, 29590.776184, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27049.416656, 29479.684448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26089.942169, 29119.219086, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jun  4 04:58:29 2013] Writing fullrun_pn_xmm0109990201_pi300-10000_pass1_cl_src4.gif
[Tue Jun  4 04:58:36 2013] ../../xmm0109990201/products/events/fullrun_pn_xmm0109990201_pi300-10000_pass1_cl_src4_src.evt and ../../xmm0109990201/products/events/fullrun_pn_xmm0109990201_pi300-10000_pass1_cl_src4_bgd.evt exist, delete to re-create
[Tue Jun  4 04:58:37 2013] Mean detx,y = (3727.62, -2730.09) 
[Tue Jun  4 04:58:37 2013] ../../xmm0109990201/products/images/fullrun_pn_xmm0109990201_pi300-10000_pass1_cl_src4_src.img and ../../xmm0109990201/products/images/fullrun_pn_xmm0109990201_pi300-10000_pass1_cl_src4_bgd.img exist, delete to re-create
[Tue Jun  4 04:58:37 2013] ../../xmm0109990201/products/spectra/fullrun_pn_xmm0109990201_pi300-10000_pass1_cl_src4_src_b10.pi.gz and ../../xmm0109990201/products/spectra/fullrun_pn_xmm0109990201_pi300-10000_pass1_cl_src4_bgd.pi exist, delete to re-create
[Tue Jun  4 04:58:37 2013] Setting source spectrum file to fullrun_pn_xmm0109990201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Tue Jun  4 04:58:37 2013] Setting bgd. spectrum file to fullrun_pn_xmm0109990201_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Tue Jun  4 04:58:37 2013] ../../xmm0109990201/products/lightcurves/fullrun_pn_xmm0109990201_pi300-10000_pass1_cl_src4_src.lc and ../../xmm0109990201/products/lightcurves/fullrun_pn_xmm0109990201_pi300-10000_pass1_cl_src4_bgd.lc exist, delete to re-create
[Tue Jun  4 18:30:19 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Jun  4 18:30:19 2013] rmf not generated due to insufficient counts
[Tue Jun  4 20:32:22 2013] Updating aperture counts using extracted products
[Tue Jun  4 20:32:22 2013] Total counts from fullrun_pn_xmm0109990201_pi300-10000_pass1_cl_src4_src_b10.pi.gz = 545.00
[Tue Jun  4 20:32:23 2013] Total counts from fullrun_pn_xmm0109990201_pi300-10000_pass1_cl_src4_bgd.pi.gz = 1519.00
[Tue Jun  4 20:32:23 2013] Got source and background scale factors 1133215.000000, 6352626.000000
[Tue Jun  4 20:32:23 2013] User source parameters:
  Position = (333.9, 362.0) = 5 5 21.72 -67 49 33.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 274.0 +/- 24.4
  Background aperture counts = 271.0
  Rate = 0.02 +/- 0.002

[Tue Jun  4 20:32:23 2013] Updating counts from extracted products
[Tue Jun  4 20:32:23 2013] Set source signif. to 274.03/16.46 = 16.65
[Tue Jun  4 20:32:35 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun  4 20:32:35 2013] Using photon index=1.80, rate=0.0174, arf fullrun_pn_xmm0109990201_pi300-10000_pass1_cl_src4.arf
[Tue Jun  4 20:32:35 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun  4 20:32:35 2013] Updating source flux to 8.5e-14
[Tue Jun  4 20:32:43 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Jun  4 20:33:08 2013] xmm0109990201/analysis//spectral/fullrun_pn_xmm0109990201_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete