[Thu Sep  6 22:59:21 2012] Detection parameters:
  Position = (337.0, 127.1) = 5 35 23.02 -66 12 57.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 305.2 +/- 21.4
  Background counts = 3.3
  Rate = 0.03 +/- 0.002

[Thu Sep  6 22:59:21 2012] Off-axis axis estimate = 12.73'
[Fri Sep  7 01:30:24 2012] Using EEF radius (= 12.79 ")to estimate initial spatial extent for simple fitting
[Fri Sep  7 01:30:24 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep  7 01:30:24 2012] Initial guess for spatial extent in simple fitting = 12.79"
[Fri Sep  7 01:30:24 2012] source mask rpix=2.9, npix_max = 47, mask sum = 34, frac = 0.718
[Fri Sep  7 01:30:24 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 12.79"
[Fri Sep  7 02:04:40 2012] fullrun_mos2_xmm0109990101_pi300-10000_cl_pass0_src5.ximg exists
[Fri Sep  7 02:04:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109990101_pi300-10000_cl_pass0_src5.csv
[Fri Sep  7 02:04:40 2012] fullrun_mos2_xmm0109990101_pi300-10000_cl_pass0_src5_1.ximg exists
[Fri Sep  7 02:04:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109990101_pi300-10000_cl_pass0_src5.csv
[Fri Sep  7 02:04:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109990101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109990101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep  7 02:04:40 2012] fullrun_mos2_xmm0109990101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Fri Sep  7 02:04:40 2012] fullrun_mos2_xmm0109990101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Fri Sep  7 02:04:40 2012] Fit fullrun_mos2_xmm0109990101_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Fri Sep  7 02:04:49 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 15.987545 pixels away
[Fri Sep  7 02:04:49 2012] Vigneting correction estimate = 1.000000
[Fri Sep  7 02:04:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep  7 02:04:49 2012] Assessing source extent using major
[Fri Sep  7 02:04:49 2012] Source does appear to be extended
[Fri Sep  7 02:04:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep  7 06:11:06 2012] Using EEF radius (= 12.79 ")to estimate initial spatial extent for simple fitting
[Fri Sep  7 06:11:06 2012] Initial guess for spatial extent in simple fitting = 12.79"
[Fri Sep  7 06:11:06 2012] source mask rpix=2.9, npix_max = 47, mask sum = 34, frac = 0.718
[Fri Sep  7 06:11:06 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 12.79"
[Fri Sep  7 07:43:31 2012] fullrun_mos2_xmm0109990101_pi300-10000_cl_pass1_src5.ximg exists
[Fri Sep  7 07:43:31 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0109990101_pi300-10000_cl_pass1_src5.csv
[Fri Sep  7 07:43:31 2012] fullrun_mos2_xmm0109990101_pi300-10000_cl_pass1_src5_1.ximg exists
[Fri Sep  7 07:43:31 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0109990101_pi300-10000_cl_pass1_src5.csv
[Fri Sep  7 07:43:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109990101_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109990101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep  7 07:43:31 2012] fullrun_mos2_xmm0109990101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Fri Sep  7 07:43:31 2012] fullrun_mos2_xmm0109990101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Fri Sep  7 07:43:31 2012] Fit fullrun_mos2_xmm0109990101_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Fri Sep  7 07:43:38 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 15.987545 pixels away
[Fri Sep  7 07:43:38 2012] Vigneting correction estimate = 1.000000
[Fri Sep  7 07:43:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep  7 07:43:38 2012] Assessing source extent using major
[Fri Sep  7 07:43:38 2012] Source does appear to be extended
[Fri Sep  7 07:43:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep  7 08:58:08 2012] XMMSAS src. selection expression = ellipse(29273.810822, 11010.681374, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Sep  7 08:58:08 2012] Writing source region out to fullrun_mos2_xmm0109990101_pi300-10000_pass1_cl_src2_src.reg
[Fri Sep  7 08:58:08 2012] Extracting stamp from image fullrun_mos2_xmm0109990101_pi300-10000_cl_sm2.00.img.gz, (300, 90) - (375, 165)
[Fri Sep  7 08:58:08 2012] XMMSAS bgd. selection expression = annulus(29273.810822, 11010.681374, 1087.500000, 2175.000000, X, Y)
[Fri Sep  7 08:58:08 2012] Writing fullrun_mos2_xmm0109990101_pi300-10000_pass1_cl_src2.gif
[Fri Sep  7 09:10:55 2012] Mean detx,y = (-11510.12, 6863.64) 
[Fri Sep  7 09:10:56 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Sep  7 09:11:07 2012] grppha failed
[Fri Sep  7 09:11:08 2012] Setting source spectrum file to fullrun_mos2_xmm0109990101_pi300-10000_pass1_cl_src2_src.pi.gz
[Fri Sep  7 09:11:08 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0109990101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri Sep  7 09:11:09 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Sep  7 09:11:09 2012] rmf not generated due to insufficient counts
[Fri Sep  7 09:11:25 2012] Updating aperture counts using extracted products
[Fri Sep  7 09:11:25 2012] Error reading totcts from fullrun_mos2_xmm0109990101_pi300-10000_pass1_cl_src2_src.pi.gz
[Fri Sep  7 09:11:25 2012] No arf file for this source, not re-computing flux
[Fri Sep  7 09:11:27 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Sep  7 09:11:28 2012] xmm0109990101/analysis//spectral/fullrun_mos2_xmm0109990101_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete