[Thu Sep  6 22:59:08 2012] Detection parameters:
  Position = (326.6, 260.0) = 5 35 30.63 -66 3 18.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 82.2 +/- 13.1
  Background counts = 9.2
  Rate = 0.009 +/- 0.001

[Thu Sep  6 22:59:08 2012] Off-axis axis estimate = 3.45'
[Fri Sep  7 00:38:51 2012] Using EEF radius (= 8.16 ")to estimate initial spatial extent for simple fitting
[Fri Sep  7 00:38:51 2012] Initial guess for spatial extent in simple fitting = 8.16"
[Fri Sep  7 00:38:51 2012] source mask rpix=1.9, npix_max = 22, mask sum = 15, frac = 0.665
[Fri Sep  7 00:38:51 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 8.16"
[Fri Sep  7 01:30:23 2012] fullrun_mos1_xmm0109990101_pi300-10000_cl_pass0_src6.ximg exists
[Fri Sep  7 01:30:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109990101_pi300-10000_cl_pass0_src6.csv
[Fri Sep  7 01:30:23 2012] fullrun_mos1_xmm0109990101_pi300-10000_cl_pass0_src6_1.ximg exists
[Fri Sep  7 01:30:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109990101_pi300-10000_cl_pass0_src6.csv
[Fri Sep  7 01:30:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109990101_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109990101_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep  7 01:30:23 2012] fullrun_mos1_xmm0109990101_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Fri Sep  7 01:30:23 2012] fullrun_mos1_xmm0109990101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Fri Sep  7 01:30:23 2012] Fit fullrun_mos1_xmm0109990101_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Fri Sep  7 02:04:48 2012] Spatial fit model total counts = 773.914000, observed total counts = 727.000000
[Fri Sep  7 02:04:48 2012] Offset between fit and detection position for source 16 = 7.642759 pixels
[Fri Sep  7 02:04:48 2012] 746.216000 total counts/ 562.162000 bgd. counts: snr = 7.762731
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 7.642759 pixels
  Position = (332.3, 254.9) = 5 35 26.59 -66 3 41.8
  Extent = 16.3 (16.3-32.6)", rotation angle = 0
  Source counts = 184.1 +/- 27.3
  Background counts = 562.2
  Rate = 0.02 +/- 0.003
[Fri Sep  7 02:04:48 2012] Vigneting correction estimate = 1.000000
[Fri Sep  7 02:04:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep  7 02:04:48 2012] Assessing source extent using major axis lower bound
[Fri Sep  7 02:04:48 2012] Source does appear to be extended
[Fri Sep  7 02:04:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep  7 02:04:48 2012] Source is confused with source 18
[Fri Sep  7 04:20:24 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep  7 04:20:24 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep  7 04:20:24 2012] Initial guess for spatial extent in simple fitting = 16.31"
[Fri Sep  7 04:20:24 2012] source mask rpix=3.7, npix_max = 72, mask sum = 72, frac = 0.997
[Fri Sep  7 04:20:24 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 16.31"
[Fri Sep  7 06:11:06 2012] fullrun_mos1_xmm0109990101_pi300-10000_cl_pass1_src6.ximg exists
[Fri Sep  7 06:11:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109990101_pi300-10000_cl_pass1_src6.csv
[Fri Sep  7 06:11:06 2012] fullrun_mos1_xmm0109990101_pi300-10000_cl_pass1_src6_1.ximg exists
[Fri Sep  7 06:11:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109990101_pi300-10000_cl_pass1_src6.csv
[Fri Sep  7 06:11:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109990101_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109990101_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep  7 06:11:06 2012] fullrun_mos1_xmm0109990101_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Fri Sep  7 06:11:06 2012] fullrun_mos1_xmm0109990101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Fri Sep  7 06:11:06 2012] Fit fullrun_mos1_xmm0109990101_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Fri Sep  7 07:43:38 2012] Warning, spatial fit 6 centroid is now closest to src. 13
[Fri Sep  7 07:43:38 2012] Vigneting correction estimate = 1.000000
[Fri Sep  7 07:43:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep  7 07:43:38 2012] Assessing source extent using major axis lower bound
[Fri Sep  7 07:43:38 2012] Source does appear to be extended
[Fri Sep  7 07:43:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep  7 08:49:25 2012] XMMSAS src. selection expression = ellipse(28860.352000, 22127.066000, 978.660028, 978.660028, 0.000000, X, Y)
[Fri Sep  7 08:49:25 2012] Writing source region out to fullrun_mos1_xmm0109990101_pi300-10000_pass1_cl_src16_src.reg
[Fri Sep  7 08:49:25 2012] Extracting stamp from image fullrun_mos1_xmm0109990101_pi300-10000_cl_sm2.00.img.gz, (276, 199) - (389, 311)
[Fri Sep  7 08:49:25 2012] XMMSAS bgd. selection expression = annulus(28860.352000, 22127.066000, 1631.100047, 3262.200094, X, Y) && !ellipse(26309.013947, 24046.544006, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(24774.789337, 22611.179413, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27813.358000, 23126.952000, 2117.736061, 2117.736061, 0.000000, X, Y) && !ellipse(24849.496552, 24901.901520, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28782.741913, 23941.996918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26991.173279, 21467.014450, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28009.461975, 21874.517639, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Sep  7 08:49:25 2012] Writing fullrun_mos1_xmm0109990101_pi300-10000_pass1_cl_src16.gif
[Fri Sep  7 08:55:55 2012] Mean detx,y = (2458.54, 1037.29) 
[Fri Sep  7 08:55:55 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Sep  7 08:56:03 2012] grppha failed
[Fri Sep  7 08:56:03 2012] Setting source spectrum file to fullrun_mos1_xmm0109990101_pi300-10000_pass1_cl_src16_src.pi.gz
[Fri Sep  7 08:56:03 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109990101_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Fri Sep  7 09:11:25 2012] Updating aperture counts using extracted products
[Fri Sep  7 09:11:25 2012] Error reading totcts from fullrun_mos1_xmm0109990101_pi300-10000_pass1_cl_src16_src.pi.gz
[Fri Sep  7 09:11:25 2012] No arf file for this source, not re-computing flux
[Fri Sep  7 09:11:26 2012] Flag c found in src. 16 procflags, skipping spectral fitting
[Fri Sep  7 09:11:26 2012] Source 16 has no response, skipping
[Fri Sep  7 09:11:27 2012] xmm0109990101/analysis//spectral/fullrun_mos1_xmm0109990101_pi300-10000_pass1_cl_src16_pl.csv not found, spectral fit skipped or did not complete