[Thu Sep  6 22:59:08 2012] Detection parameters:
  Position = (303.0, 277.0) = 5 35 47.55 -66 2 5.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 39387.9 +/- 238.8
  Background counts = 12.3
  Rate = 4 +/- 0.02

[Thu Sep  6 22:59:08 2012] Off-axis axis estimate = 1.59'
[Fri Sep  7 00:38:51 2012] Using EEF radius (= 7.22 ")to estimate initial spatial extent for simple fitting
[Fri Sep  7 00:38:51 2012] Initial guess for spatial extent in simple fitting = 7.22"
[Fri Sep  7 00:38:51 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.857
[Fri Sep  7 00:38:51 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.22"
[Fri Sep  7 01:30:23 2012] fullrun_mos1_xmm0109990101_pi300-10000_cl_pass0_src1.ximg exists
[Fri Sep  7 01:30:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109990101_pi300-10000_cl_pass0_src1.csv
[Fri Sep  7 01:30:23 2012] fullrun_mos1_xmm0109990101_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Sep  7 01:30:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109990101_pi300-10000_cl_pass0_src1.csv
[Fri Sep  7 01:30:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109990101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109990101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep  7 01:30:23 2012] fullrun_mos1_xmm0109990101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Sep  7 01:30:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109990101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Fri Sep  7 01:30:23 2012] fullrun_mos1_xmm0109990101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Sep  7 01:30:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109990101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Fri Sep  7 01:30:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109990101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109990101_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep  7 02:04:48 2012] Spatial fit model total counts = 82193.400000, observed total counts = 95260.000000
[Fri Sep  7 02:04:48 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Sep  7 02:04:48 2012] Vigneting correction estimate = 1.000000
[Fri Sep  7 02:04:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep  7 02:04:48 2012] Assessing source extent using major
[Fri Sep  7 02:04:48 2012] Source does appear to be extended
[Fri Sep  7 02:04:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep  7 04:20:24 2012] Using EEF radius (= 7.22 ")to estimate initial spatial extent for simple fitting
[Fri Sep  7 04:20:24 2012] Initial guess for spatial extent in simple fitting = 7.22"
[Fri Sep  7 04:20:24 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.857
[Fri Sep  7 04:20:24 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.22"
[Fri Sep  7 06:11:06 2012] fullrun_mos1_xmm0109990101_pi300-10000_cl_pass1_src1.ximg exists
[Fri Sep  7 06:11:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109990101_pi300-10000_cl_pass1_src1.csv
[Fri Sep  7 06:11:06 2012] fullrun_mos1_xmm0109990101_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Sep  7 06:11:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109990101_pi300-10000_cl_pass1_src1.csv
[Fri Sep  7 06:11:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109990101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109990101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep  7 06:11:06 2012] fullrun_mos1_xmm0109990101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Sep  7 06:11:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109990101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Fri Sep  7 06:11:06 2012] fullrun_mos1_xmm0109990101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Sep  7 06:11:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109990101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Fri Sep  7 06:11:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109990101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109990101_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep  7 07:43:38 2012] Spatial fit model total counts = 83861.800000, observed total counts = 95260.000000
[Fri Sep  7 07:43:38 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Sep  7 07:43:38 2012] Vigneting correction estimate = 1.000000
[Fri Sep  7 07:43:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep  7 07:43:38 2012] Assessing source extent using major
[Fri Sep  7 07:43:38 2012] Source does appear to be extended
[Fri Sep  7 07:43:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep  7 08:49:25 2012] Counts = 39387.886719, rescaling region sizes by 3.000000
[Fri Sep  7 08:49:25 2012] XMMSAS src. selection expression = ellipse(26309.013947, 24046.544006, 1957.500000, 1957.500000, 0.000000, X, Y)
[Fri Sep  7 08:49:25 2012] Writing source region out to fullrun_mos1_xmm0109990101_pi300-10000_pass1_cl_src1_src.reg
[Fri Sep  7 08:49:25 2012] Extracting stamp from image fullrun_mos1_xmm0109990101_pi300-10000_cl_sm2.00.img.gz, (190, 164) - (415, 389)
[Fri Sep  7 08:49:25 2012] XMMSAS bgd. selection expression = annulus(26309.013947, 24046.544006, 9787.500000, 19575.000000, X, Y) && !ellipse(29288.782532, 11005.981972, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20787.814400, 30506.161200, 348.306410, 348.306410, 0.000000, X, Y) && !ellipse(24774.789337, 22611.179413, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25850.001862, 7977.981461, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28860.352000, 22127.066000, 1304.880038, 1304.880038, 0.000000, X, Y) && !ellipse(17471.955600, 26996.936200, 481.805614, 481.805614, 0.000000, X, Y) && !ellipse(27813.358000, 23126.952000, 2117.736061, 2117.736061, 0.000000, X, Y) && !ellipse(34938.700480, 29646.403000, 471.321614, 471.321614, 0.000000, X, Y) && !ellipse(24849.496552, 24901.901520, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24255.401886, 23198.519684, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20883.452800, 28460.871200, 476.048014, 476.048014, 0.000000, X, Y) && !ellipse(18434.640400, 27075.886120, 695.143220, 695.143220, 0.000000, X, Y) && !ellipse(28782.741913, 23941.996918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33387.983400, 15762.286000, 695.299220, 695.299220, 0.000000, X, Y) && !ellipse(26991.173279, 21467.014450, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28009.461975, 21874.517639, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38380.626000, 31478.927820, 601.120817, 601.120817, 0.000000, X, Y) && !ellipse(22384.234000, 35901.284060, 1190.056034, 454.561613, 22.947888, X, Y)
[Fri Sep  7 08:49:25 2012] Writing fullrun_mos1_xmm0109990101_pi300-10000_pass1_cl_src1.gif
[Fri Sep  7 08:49:31 2012] Mean detx,y = (-96.01, 250.97) 
[Fri Sep  7 08:49:32 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Sep  7 08:55:14 2012] grppha failed
[Fri Sep  7 08:55:14 2012] Setting source spectrum file to fullrun_mos1_xmm0109990101_pi300-10000_pass1_cl_src1_src.pi.gz
[Fri Sep  7 08:55:14 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109990101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Sep  7 08:58:06 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Sep  7 08:58:06 2012] rmf not generated due to insufficient counts
[Fri Sep  7 09:11:24 2012] Updating aperture counts using extracted products
[Fri Sep  7 09:11:24 2012] Error reading totcts from fullrun_mos1_xmm0109990101_pi300-10000_pass1_cl_src1_src.pi.gz
[Fri Sep  7 09:11:25 2012] No arf file for this source, not re-computing flux
[Fri Sep  7 09:11:26 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri Sep  7 09:11:27 2012] xmm0109990101/analysis//spectral/fullrun_mos1_xmm0109990101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete