[Thu Mar 15 14:33:05 2012] Detection parameters:
  Position = (274.8, 85.1) = 9 18 5.85 -12 19 10.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 71.2 +/- 10.2
  Background counts = 3.3
  Rate = 0.02 +/- 0.002

[Thu Mar 15 14:33:05 2012] Off-axis axis estimate = 15.56'
[Thu Mar 15 14:52:16 2012] Using EEF radius (= 14.21 ")to estimate initial spatial extent for simple fitting
[Thu Mar 15 14:52:16 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Mar 15 14:52:16 2012] Initial guess for spatial extent in simple fitting = 14.21"
[Thu Mar 15 14:52:16 2012] source mask rpix=3.3, npix_max = 56, mask sum = 48, frac = 0.846
[Thu Mar 15 14:52:16 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 14.21"
[Thu Mar 15 15:10:34 2012] fullrun_mos2_xmm0109980501_pi300-10000_cl_pass0_src5.ximg exists
[Thu Mar 15 15:10:35 2012] fullrun_mos2_xmm0109980501_pi300-10000_cl_pass0_src5_1.ximg exists
[Thu Mar 15 15:10:35 2012] Fit fullrun_mos2_xmm0109980501_pi300-10000_cl_pass0_src5 appears to have run properly
[Thu Mar 15 15:10:35 2012] fullrun_mos2_xmm0109980501_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Thu Mar 15 15:10:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109980501_pi300-10000_cl_pass0_tfrozen_src5.csv
[Thu Mar 15 15:10:35 2012] fullrun_mos2_xmm0109980501_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Thu Mar 15 15:10:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0109980501_pi300-10000_cl_pass0_tfrozen_src5.csv
[Thu Mar 15 15:10:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0109980501_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0109980501_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 15:10:40 2012] Spatial fit model total counts = 90.087900, observed total counts = 92.000000
[Thu Mar 15 15:10:40 2012] Offset between fit and detection position for source 8 = 0.886648 pixels
[Thu Mar 15 15:10:40 2012] 88.844700 total counts/ 71.703800 bgd. counts: snr = 2.024242
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.886648 pixels
  Position = (274.3, 85.9) = 9 18 5.98 -12 19 5.2
  Extent = 4.9" x 4.9", rotation angle = 0
  Source counts = 17.1 +/- 9.4
  Background counts = 71.7
  Rate = 0.004 +/- 0.002
[Thu Mar 15 15:10:40 2012] Vigneting correction estimate = 1.000000
[Thu Mar 15 15:10:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 15 15:10:40 2012] Assessing source extent using major
[Thu Mar 15 15:10:40 2012] Source does appear to be extended
[Thu Mar 15 15:10:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 15 15:10:40 2012] Deleting source due to low Poisson probability 0.7