[Thu Mar 15 14:32:40 2012] Detection parameters:
  Position = (287.5, 282.9) = 9 18 2.07 -12 4 48.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 119.8 +/- 19.7
  Background counts = 78.0
  Rate = 0.03 +/- 0.004

[Thu Mar 15 14:32:41 2012] Off-axis axis estimate = 1.38'
[Thu Mar 15 14:33:49 2012] Using EEF radius (= 7.12 ")to estimate initial spatial extent for simple fitting
[Thu Mar 15 14:33:49 2012] Initial guess for spatial extent in simple fitting = 7.12"
[Thu Mar 15 14:33:49 2012] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.095
[Thu Mar 15 14:33:49 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.12"
[Thu Mar 15 14:52:16 2012] fullrun_mos1_xmm0109980501_pi300-10000_cl_pass0_src3.ximg exists
[Thu Mar 15 14:52:16 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0109980501_pi300-10000_cl_pass0_src3.csv
[Thu Mar 15 14:52:16 2012] fullrun_mos1_xmm0109980501_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu Mar 15 14:52:16 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0109980501_pi300-10000_cl_pass0_src3.csv
[Thu Mar 15 14:52:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109980501_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109980501_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 14:52:16 2012] fullrun_mos1_xmm0109980501_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu Mar 15 14:52:16 2012] fullrun_mos1_xmm0109980501_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu Mar 15 14:52:16 2012] Fit fullrun_mos1_xmm0109980501_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Thu Mar 15 15:10:38 2012] Source 3 is offset by 7.050270 and 6.410195 pixels which is larger than
2 X fitted extent = 5.557517 x 5.557517, not incorporating fit results
[Thu Mar 15 15:10:38 2012] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 11.150832 pixels away
[Thu Mar 15 15:10:38 2012] Vigneting correction estimate = 1.000000
[Thu Mar 15 15:10:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 15 15:10:38 2012] Assessing source extent using major
[Thu Mar 15 15:10:38 2012] Source does appear to be extended
[Thu Mar 15 15:10:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 15 15:10:38 2012] Source is confused with source 8
[Thu Mar 15 15:10:45 2012] Using EEF radius (= 7.12 ")to estimate initial spatial extent for simple fitting
[Thu Mar 15 15:10:45 2012] Initial guess for spatial extent in simple fitting = 7.12"
[Thu Mar 15 15:10:45 2012] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.095
[Thu Mar 15 15:10:45 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 7.12"
[Thu Mar 15 15:30:52 2012] fullrun_mos1_xmm0109980501_pi300-10000_cl_pass1_src3.ximg exists
[Thu Mar 15 15:30:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109980501_pi300-10000_cl_pass1_src3.csv
[Thu Mar 15 15:30:52 2012] fullrun_mos1_xmm0109980501_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu Mar 15 15:30:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0109980501_pi300-10000_cl_pass1_src3.csv
[Thu Mar 15 15:30:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0109980501_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0109980501_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 15 15:30:52 2012] fullrun_mos1_xmm0109980501_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu Mar 15 15:30:52 2012] fullrun_mos1_xmm0109980501_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu Mar 15 15:30:52 2012] Fit fullrun_mos1_xmm0109980501_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Thu Mar 15 15:45:26 2012] Source 3 is offset by 7.050270 and 6.410195 pixels which is larger than
2 X fitted extent = 5.527816 x 5.527816, not incorporating fit results
[Thu Mar 15 15:45:26 2012] Vigneting correction estimate = 1.000000
[Thu Mar 15 15:45:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 15 15:45:26 2012] Assessing source extent using major
[Thu Mar 15 15:45:26 2012] Source does appear to be extended
[Thu Mar 15 15:45:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 15 15:45:32 2012] XMMSAS src. selection expression = ellipse(24964.411530, 24560.724945, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Mar 15 15:45:32 2012] Writing source region out to fullrun_mos1_xmm0109980501_pi300-10000_pass1_cl_src3_src.reg
[Thu Mar 15 15:45:32 2012] Extracting stamp from image fullrun_mos1_xmm0109980501_pi300-10000_cl_sm2.00.img.gz, (250, 245) - (325, 320)
[Thu Mar 15 15:45:33 2012] XMMSAS bgd. selection expression = annulus(24964.411530, 24560.724945, 1087.500000, 2175.000000, X, Y) && !ellipse(24742.766000, 21304.484000, 1316.032038, 1316.032038, 0.000000, X, Y) && !ellipse(23782.356240, 23474.691800, 1240.808036, 1240.808036, 0.000000, X, Y) && !ellipse(21867.476000, 21997.538000, 1352.232039, 1352.232039, 0.000000, X, Y) && !ellipse(23074.320000, 23006.284000, 1352.232039, 1352.232039, 0.000000, X, Y) && !ellipse(24713.901550, 24977.094604, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Mar 15 15:45:33 2012] Writing fullrun_mos1_xmm0109980501_pi300-10000_pass1_cl_src3.gif
[Thu Mar 15 15:53:19 2012] Mean detx,y = (-445.85, 105.57) 
[Thu Mar 15 15:53:20 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar 15 15:53:29 2012] Binned source spectrum to 10 counts/bin
[Thu Mar 15 15:53:29 2012] Setting source spectrum file to fullrun_mos1_xmm0109980501_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Mar 15 15:53:29 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0109980501_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Thu Mar 15 16:33:02 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Mar 15 16:33:02 2012] rmf not generated due to insufficient counts
[Thu Mar 15 18:41:23 2012] Updating aperture counts using extracted products
[Thu Mar 15 18:41:23 2012] Error reading totcts from fullrun_mos1_xmm0109980501_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Thu Mar 15 18:41:23 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 15 18:41:23 2012] Using photon index=1.80, rate=0.0268, arf fullrun_mos1_xmm0109980501_pi300-10000_pass1_cl_src3.arf
[Thu Mar 15 18:41:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 15 18:41:23 2012] Updating source flux to 2.6e-13
[Thu Mar 15 18:41:25 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting